Raspberry Pi 5 Sata Hat
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
22 marzo 2025
ODSS
Raspberry Pi 5 Penta SATA HAT, fino a 5 dischi SATA HAT
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Confezione: 1 cappello Penta SATA
Perfettamente supportato da Raspberry Pi serie 5
La soluzione perfetta per server NAS: 4 SATA + 1 interfaccia eSATA
Ulteriori interfacce di espansione: progettato per supportare display OLED e ventola
Opzioni di interfaccia di alimentazione flessibile: interfaccia di alimentazione ATX standard o interfaccia di alimentazione CC 12V
117,58 € SU AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Waveshare
Waveshare Industrial Grade Metal Case (D) For Raspberry Pi 5, Larger Internal Space, Supports Installing Official Cooling Fan And Various HATs, Wall-Mount And Rail-Mount Support
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Industrial Metal Case For Raspberry Pi 5 - Rail-Mount And Wall-Mount Support, Larger Internal Space, Supports Installing Various HATs And Expansion Boards
Larger Internal Space - Specifically designed for Raspberry Pi 5, sheet metal process design, large internal capacity, compatible with Raspberry Pi 5 most module/accessories
Precise Cut-Out Design - Each Cut-Out Is Completely Aligned With The Interfaces Of Pi5, With Removable Reserved Holes. It Also Has Reserved Antenna Holes And RF Outlets To Reduce Signal Attenuation Of WiFi And BT Communication
Wall Mount & Rail-Mount Support - More Flexible For Industrial Installation And Use
Supports Installing Various HATs(Not included) - Such as PCIe TO 4G/5G M.2 USB3.2 HAT+, PCIe TO MiniPCIe GbE USB3.2 HAT+, PCIe TO Gigabit ETH USB3.2 HAT+,
15,99 € SU AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
37,89 € SU AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
16,39 € SU AMAZON
Waveshare
Waveshare NVMe PCIe To M.2 HAT+ Adapter with PoE, Compatible with Raspberry Pi 5, Supports NVMe Drive Protocol 2230/2242 M.2 Solid State Drive and 802.3af/at Network Standard, with Cooling Fan
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € SU AMAZON
Freenove
Freenove M.2 NVMe SSD Adapter for Raspberry Pi 5, M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 3.0, 1231MB/s
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Big Upgrade -> Boost your system to an amazing speed by upgrading memory card (104MB/s max) to SSD (PCIe 2.0: 500MB/s max, PCIe 3.0: 1231MB/s max). (Note: Usually unable to reach maximum speed due to various limitations.) (Note: Raspberry Pi states that PCIe 3.0 may be unstable.)
Compatible SSDs -> M.2 NVMe SSDs are compatible, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280. (Note: NOT compatible with M.2 SATA SSDs.)
Two Uses -> Used as system disk or regular hard drive. Provide detailed tutorial. (Download needed, no paper tutorial.)
Easy to Use -> Just tighten the screws and connect the ribbon cable. (Simple configuration needed, see tutorial.)
Compatible models -> Raspberry Pi 5 only. (Note: NOT compatible with any other Raspberry Pi models.)
9,95 € SU AMAZON
GeeekPi
GeeekPi Dual FPC PCIe Hat for Raspberry Pi 5, B12 Hat 1 to 2 PCIe Interface with 40Pin GPIO Pin Header for Raspberry Pi 5, FPC Ribbon Cavi Included
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Dual PCIe Expansion】Espansione espand your Raspberry Pi 5's FPC PCIe interface into two, providing users with the convenience of connecting multiple PCIe devices simultaneously for increased productivity and versatility.
【Daisy-Chaining Capability】Connect multiple B12 units in a cascading fashion to create a multi-tered PCIe configuration, allowing for expanded connectivity options and customized setup tailored to your specific needs.
【Connettività avanzata】Sblocca il potenziale per collegare una vasta gamma di dispositivi PCIe, come SSDs, GPUs, network cards, e altro ancora, espandendo le capacità del tuo Raspberry Pi 5 per varie applicazioni e progetti.
Design robusto e affidabile: costruito con qualità e durata in mente, il B12 Raspberry Pi HAT garantisce prestazioni stabili e affidabili, fornendo una soluzione dependable per la tua espansione PCIe.
【Dual Board Expansion】Questa funzione consente di collegare due schede Pineberry Pi aggiuntive, fornendo utenti con la flessibilità per espandere i loro scope e funzionalità.
【ASMedia PCIe Switch Integration】La scheda incorporata un ASMedia PCIe Switch (Gen2 variant), facilitating reliable and efficient data transfer between connected devices.
【Included FPC Ribbon Cables】Three FPC ribbon cables are provided, simplifying the connection process and offering flexibility in setup and configuration.
27,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 Scheda di espansione HDD/SSD SATA da 2,5 pollici per Raspberry Pi 4 (non include Raspberry Pi o HDD/SSD)
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
36,89 € SU AMAZON
GeeekPi
GeeekPi Custodia in metallo per Raspberry Pi 5, con ufficiale Raspberry Pi M.2 Hat+ and Active Cooler, supporto M.2 SSD 2230/2242
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Questo kit include una custodia in metallo, un ufficiale Raspberry Pi M.2 HAT+ and active cooler. It is compatible with the latest Raspberry Pi 5 4GB/8GB board and it supports M.2 NVMe SSD 2230 2242.
【Access to most porte】GeeekPi Raspberry Pi 5 Metal Case can accurately access most ports of Raspberry Pi 5 board, including usb-c power jack, micro HDMI porte, porte USB, jack Ethernet, sd card slot, power button, and GPIO port.
【Raspberry Pi 5 Active Cooler】Raspberry Pi 5 Active Cooler combina un heatsink in alluminio con un ventilatore PWM per mantenere il tuo Raspberry Pi 5 mantiene le temperature ottimali, prestazioni affidabili per varie applicazioni.
【Raspberry Pi M.2 HAT+】It supporti single-lane PCIe 2.0 interface and M.2 SSD 2230/2242. It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place.
【NOTA】Raspberry Pi 5 board non è incluso.
39,99 € SU AMAZON
raspberry pi hat sata
raspberry pi sata hat
hat raspberry pi 5
raspberry 5 sata hat
sata hat raspberry 5
raspberry pi 5 sata
sata raspberry pi 5
pi 5 sata hat
raspberry pi 4 hat sata
raspberry pi 4 sata hat