Raspberry Pi 4 Sata Hat
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
17 febbraio 2025
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum NAS Case with PWM Fan and M.2 SATA SSD Adapter Board,Raspberry Pi 4 Passive Aluminum Case with 3510 Ultra-Quiet Cooling Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4 Model B --- This aluminum Case contains an Armor Lite Aluminum Heatsink and an M.2 SATA SSD expansion board,is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version.
The Case With High quality aluminium material --- sturdy and durable,It can protect the Raspberry Pi well and keep your Raspberry Pi 4 free from scratches, dust and damage.
With an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi
Good Heat Dissipation Effect --- With 3510 Ultra-Quiet Cooling Fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly. Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS.
We strongly recommend using the official Raspberry Pi operating system, which can directly configure the fan to adjust the speed according to the CPU temperature through the raspi-config command.Other operating systems may require you to write software yourself and send PWM signals to the fan through GPIO pins to control fan’s speed.
Package Includes: 1x Aluminum Case,1x 3510 Ultra-Quiet Cooling Fan,1x M.2 SATA SSD Expansion Board (Note:Raspberry Pi is Not Included!)
Technology support: wiki.52pi.com/index.php?title=ZP-0140
45,99 € SU AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
37,89 € SU AMAZON
Waveshare
Waveshare USB 3.2 Gen1 HUB HAT for Raspberry Pi 4 with 4X USB 3.2 Gen1 Ports Up to 5 Gbps Data Rate Support Driver-Free Plug and Play USB Capability Expansion Board
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
This is a driver-free 4 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, provides more USB capability to your Pi, make it easy to connect more USB devices. The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.
4x USB 3.2 Gen1 ports, compatible with USB 3.0 / 2.0 /1.1,Onboard external USB-C 5V DC power port, ensures more stable power supply
1x power indicator and 4x USB port indicators, easy to check the operating status
Driver-free, plug and play, compatible with OS including Windows, mac OS, Linux and Android
Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi version as well,Comes with development resources and manual
26,99 € SU AMAZON
Geekworm
Geekworm X825-C8 Case, Only Support X825 V2.0 2.5 Inch SATA SSD/HDD Shield & Raspberry Pi 4 & X735 (Raspberry Pi / X825 / X735 Not Included)
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Packing List】X825-C8 Metal Case x 1, Momentary Power Switch x 1, 4010 Cooling Fan x 1
【Application】for use with Raspberry Pi 4 with X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board (ASIN: B091JSRQ9C) and X735 (ASIN: B07NLR49L1)
【Note】NOT include Raspberry Pi 4 / X825 / X735/ SSD / HDD!
【Supported SSD (Not included)】Support Max 9.5mm thickness 2.5 inch SATA HDD/SSD installation
【About WiFi Description】USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So please use Ethernet or WIFI 5G AP if you find the 2.4G signal is unstable. (Pls refer to WiKi X825#Document)
22,89 € SU AMAZON
Geekworm
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board with USB 3.1 Connector Support Key-B 2280 SSD
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Important Note】Pls format the new SSD before use.
【Raspberry Pi 4 NGFF SATA SSD Shield】X862 V2.0 Adapter supports M.2 NGFF SSD Key-B 2280 length for Raspberry Pi 4 8GB/4GB/2GB/1GB (NOT include Raspberry Pi board or SSD). UASP supported, NOT support TRIM
【How to Power】√ Model 1. power via Raspberry Pi 4: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK); √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Allows booting OS from HDD/SSD 】Booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot)
【Matching Metal Case(not included)】No matching case now. X857-C3 Case (ASIN: B08VJC5CD4) for X862 and Raspberry Pi 4 is out of stock and off-production.
31,89 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum NAS Case with ICE Tower Cooler and M.2 SATA SSD Adapter Board,Raspberry Pi 4 Passive Aluminum Case with 4007 Ultra-Quiet PWM Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Compatibile con Raspberry Pi 4 modello B: questa custodia in mattoni in alluminio contiene un dispositivo di raffreddamento a torre ICE e una scheda di espansione SSD M.2 SATA è progettata solo per Raspberry Pi 4 modello B versione 1 GB/2 GB/4 GB/8 GB.
Custodia in alluminio di alta qualità, robusta e durevole, può proteggere bene il Raspberry Pi e proteggere il tuo Raspberry Pi 4 da graffi, polvere e danni.
Con una scheda di espansione SSD M.2 SATA che può espandere lo storage di massa per il tuo Raspberry Pi. Nota: le unità SSD Raspberry Pi 4B e M.2 SATA non sono incluse nella confezione, richiedono un acquisto aggiuntivo. Si prega di prestare attenzione al tipo di unità SSD, deve essere M.2 SATA SSD 2280, la scheda adattatore non supporta SSD NVME.
Buon effetto di dissipazione del calore: con il dispositivo di raffreddamento a torre Raspberry Pi può ridurre rapidamente la temperatura della scheda Raspberry Pi. Diverso dalle normali ventole, questa ventola di raffreddamento supporta la regolazione della velocità PWM, che è perfettamente compatibile con Raspberry Pi OS.
Si consiglia vivamente di utilizzare il sistema operativo Raspberry Pi ufficiale, che può configurare direttamente la ventola per regolare la velocità in base alla temperatura del processore tramite il controllo di configurazione Raspi. Altri sistemi operativi possono obbligarvi a scrivere tu stesso il software e a inviare segnali PWM alla ventola tramite i pin GPIO per controllare la velocità della ventola.
49,99 € SU AMAZON
GeeekPi
GeeekPi Per Raspberry Pi 4,X862 V2.0 M.2 NGFF SATA SSD scheda di espansione con porta USB 3.1, supporto solo Key-B 2280 SSD
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
X862 V2.0 è alimentato tramite il connettore USB 3.0. Utilizzando un distanziatore in rame più corto per collegare Raspberry Pi 4 e X862 V2.0, riducendo l'altezza dell'intero prodotto.
Fornisce una scheda di espansione SATA SSD con interfaccia M.2/NGFF SSD Key-B 2280.
Supporta solo Raspberry Pi 4B.
Compatibile solo con M.2 NGFF 2280 Key-B 2280 lunghezze
Supporta solo UASP, non supporta TRIM..Supporta la tecnologia: wiki.52pi.com/index.php/X862_SKU:_EZ-0096. Contenuto della confezione: 1 x X862 V2.0 M.2 NGFF SATA SSD Shield, 1 x adattatore USB 3.1 (connettore USB), 4 x viti M2,5 x 6 mm, 4 x pilastro in rame M/F M2,5 x 7 + 6 mm, 4 x pilastro in rame F/F M2,5 x 9,5 mm, 1 mm, 1 mm, 1 mm mm, 1 caccia. is, 1 x . M2 x 4. mm (per fissare unità SSD), 4 dissipatori, 1 piastra inferiore trasparente
39,97 € SU AMAZON
Waveshare
Waveshare USB HUB HAT (B) for Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
✅Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
✅4x extended USB ports, compatible with USB 2.0 / 1.1
✅Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
✅USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
16,15 € SU AMAZON
GeeekPi
GeeekPi DeskPi Lite NAS Case Kit,Raspberry Pi 4 NAS Case with M.2 SATA SSD Expansion Board,Built in Raspberry Pi 4 Heatsink with Ultra-Quiet PWM Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Materiale ABS di alta qualità The DeskPi Lite NAS features a sturdy ABS (Acrilonitrile butadiene Styrene) case that provides durability and protection for your M.2 SATA SSD expansion board and other internal components. ABS è noto per la sua stenza e impatto, rendendolo un materiale ideale per questo tipo di custodia.
Equipped with M.2 SATA SSD Expansion Board The case is designed with an integrated M.2 SATA SSD expansion board, allowing you to easily install and securely mount an M.2 SATA SSD. Questa scheda di espansione fornisce capacità di archiviazione aggiuntiva per il tuo NAS setup, migliorando la sua versatilità e prestazioni.
Built in PWM Signal Controlled Fan The cooling heatsink is companied by a PWM (Pulse Width Modulation) signal controlled fan. Questo fan è capace di regolare dinamicamente la sua velocità rotazionale basata su temperature requirements. Monitorando la temperatura del sistema, il fan può aumentare automaticamente o decrease its speed to provide effective cooling while minimizing noise levels.
Better Cooling System To Mantain optimale operating Temperatures for the M.2 SATA SSD and other components, the DeskPi Lite NAS incorporates a cooling heatsink. Il heatsink efficiently dissipates heat generated during extended operation, preventing overheating and ensuring the reliable performance of your NAS system.The combination of the cooling heatsinks and the PWM signal controlled fan ensures efficient airflow within the case.
Easy Installation The DeskPi Lite NAS è progettato per l'installazione straightforward. Tipically includes all the necessary mounting hardware and connectors, making it easy to assembly and integrated with your existing NAS setup..Easy Access to All Ports It can be access to all ports. The customized aluminum alloy radiator with edge expansion board allows to easily access the GPIO interface. The rubber dust cover prevents the GPIO from falling into dust..Technical Support _lite_nas_case/.
49,99 € SU AMAZON
Waveshare
Waveshare 2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi 5/4/3/Zero Dual Chips Solution Stackable Design For Expanding Multiple CAN Channels Supports Wide Range Voltage Input of 7~36V
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Standard Pi 40PIN GPIO extension header, compatible with Raspberry Pi/Jetson Nano series boards. Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
Onboard unibody power supply isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal. Onboard digital isolator, signal isolation makes the communication more safe and stable, and better anti-interference
Onboard external power supply terminal, supports 7~36V wide voltage power input, supports powering the Pi and the HAT at the same time. Onboard SM24CANB TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
Onboard voltage translator, select 3.3V/5V operating voltage by jumper. Onboard 120Ω terminal resistor, configured by jumper
Breakout SPI and I2C control pins, for connecting with other host control boards. Can provide with online development resources and manual (examples in Python/C)
36,99 € SU AMAZON
raspberry pi 4 hat sata
hat raspberry pi 4
raspberry pi 4 hat
raspberry pi 4 sata
sata raspberry pi 4
raspberry pi sata hat
raspberry pi 4 tv hat
raspberry pi 4 nvme hat
raspberry pi 4 ups hat
poe hat raspberry pi 4