Raspberry Pi 4 Hat Sata
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
2 febbraio 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 Scheda di espansione HDD/SSD SATA da 2,5 pollici per Raspberry Pi 4 (non include Raspberry Pi o HDD/SSD)
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
36,89 € SU AMAZON
Geekworm
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board with USB 3.1 Connector Support Key-B 2280 SSD
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Important Note】Pls format the new SSD before use.
【Raspberry Pi 4 NGFF SATA SSD Shield】X862 V2.0 Adapter supports M.2 NGFF SSD Key-B 2280 length for Raspberry Pi 4 8GB/4GB/2GB/1GB (NOT include Raspberry Pi board or SSD). UASP supported, NOT support TRIM
【How to Power】√ Model 1. power via Raspberry Pi 4: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK); √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Allows booting OS from HDD/SSD 】Booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot)
【Matching Metal Case(not included)】No matching case now. X857-C3 Case (ASIN: B08VJC5CD4) for X862 and Raspberry Pi 4 is out of stock and off-production.
31,89 € SU AMAZON
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
GeeekPi
GeeekPi DeskPi Lite NAS Case Kit,Raspberry Pi 4 NAS Case with M.2 SATA SSD Expansion Board,Built in Raspberry Pi 4 Heatsink with Ultra-Quiet PWM Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Materiale ABS di alta qualità The DeskPi Lite NAS features a sturdy ABS (Acrilonitrile butadiene Styrene) case that provides durability and protection for your M.2 SATA SSD expansion board and other internal components. ABS è noto per la sua stenza e impatto, rendendolo un materiale ideale per questo tipo di custodia.
Equipped with M.2 SATA SSD Expansion Board The case is designed with an integrated M.2 SATA SSD expansion board, allowing you to easily install and securely mount an M.2 SATA SSD. Questa scheda di espansione fornisce capacità di archiviazione aggiuntiva per il tuo NAS setup, migliorando la sua versatilità e prestazioni.
Built in PWM Signal Controlled Fan The cooling heatsink is companied by a PWM (Pulse Width Modulation) signal controlled fan. Questo fan è capace di regolare dinamicamente la sua velocità rotazionale basata su temperature requirements. Monitorando la temperatura del sistema, il fan può aumentare automaticamente o decrease its speed to provide effective cooling while minimizing noise levels.
Better Cooling System To Mantain optimale operating Temperatures for the M.2 SATA SSD and other components, the DeskPi Lite NAS incorporates a cooling heatsink. Il heatsink efficiently dissipates heat generated during extended operation, preventing overheating and ensuring the reliable performance of your NAS system.The combination of the cooling heatsinks and the PWM signal controlled fan ensures efficient airflow within the case.
Easy Installation The DeskPi Lite NAS è progettato per l'installazione straightforward. Tipically includes all the necessary mounting hardware and connectors, making it easy to assembly and integrated with your existing NAS setup..Easy Access to All Ports It can be access to all ports. The customized aluminum alloy radiator with edge expansion board allows to easily access the GPIO interface. The rubber dust cover prevents the GPIO from falling into dust..Technical Support _lite_nas_case/.
49,99 € SU AMAZON
Freenove
Freenove M.2 NVMe SSD Adapter for Raspberry Pi 5, M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 3.0, 1231MB/s
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (Note: NOT compatible with some models, please find the list from tutorial or Raspberry Pi documentation)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € SU AMAZON
Geekworm
Raspberry Pi 4 Dissipatore di Calore Caso/Caso In Lega di Alluminio di Raffreddamento Passivo di raffreddamento per Raspberry Pi 4 Modello B Solo
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Pi 4 Passive Cooling Case】Geekworm raspberry pi 4 armor case, aluminum alloy case for Raspberry Pi 4 Model B (8GB/4GB/2GB/1GB)
【Equipped with 2pcs GPIO Headers】With 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable
【Packing List】1 x Raspberry Pi 4 Aluminum Case, 1 x Screws Pack, 1 x Hexagon Screwdriver, 3 x Thermal Tapes, 2 x GPIO Headers
【About WiFi Interference】Open case design, don't need to worry about wifi signal so much
【Better Cooling Solution】If you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 0.5mm cooper heatsink(not included) and match with CPU grease
13,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 11 mm Embedded Dissipatore (P165-B), Raspberry Pi 4B Dissipatore di Calore/Radiatore per Raspberry Pi 4 Modello B & Pi 4 Scheda di Espansione Supporto POE Estensione
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
La nuova versione Geekworm embedded armatura in lega di alluminio dissipatore di calore (P165-B) è progettato solo per Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB versione, dissipatore di calore incorporato con 11mm di spessore. WIKI per riferimento: raspberrypiwiki.com/P165
Supporta il raffreddamento della scheda Raspberry Pi 4 quando si utilizza la scheda di espansione Pi 4 (supporta anche la scheda PoE); è compatibile con Raspberry Pi 4 scheda di espansione per inclinare il problema di surriscaldamento del lampone pi 4, ma è necessario preparare i supporti o le viti adeguate per utilizzare il P165-B con altre schede di espansione.
Dotato solo di 4 distanziatori M2.5X5+6mm per il dissipatore di calore incorporato P165-B, dovrai preparare ulteriori standoff o viti per Raspberry Pi 4 con altre schede di espansione.
Aggiungere un pezzo di nastro termico come regalo in caso di necessità. Ma si consiglia vivamente di utilizzare il grasso della CPU (non incluso) per ottenere una migliore dissipazione del calore.
Supporta l'installazione di una ventola da 30 mm; la ventola di raffreddamento può essere aggiunta quando la dissipazione del calore di un singolo dissipatore di calore in alluminio non è sufficiente, in modo che tutti i problemi di dissipazione del calore Raspberry Pi 4 possano essere risolti.
9,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum NAS Case with PWM Fan and M.2 SATA SSD Adapter Board,Raspberry Pi 4 Passive Aluminum Case with 3510 Ultra-Quiet Cooling Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4 Model B --- This aluminum Case contains an Armor Lite Aluminum Heatsink and an M.2 SATA SSD expansion board,is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version.
The Case With High quality aluminium material --- sturdy and durable,It can protect the Raspberry Pi well and keep your Raspberry Pi 4 free from scratches, dust and damage.
With an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi
Good Heat Dissipation Effect --- With 3510 Ultra-Quiet Cooling Fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly. Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS.
We strongly recommend using the official Raspberry Pi operating system, which can directly configure the fan to adjust the speed according to the CPU temperature through the raspi-config command.Other operating systems may require you to write software yourself and send PWM signals to the fan through GPIO pins to control fan’s speed.
Package Includes: 1x Aluminum Case,1x 3510 Ultra-Quiet Cooling Fan,1x M.2 SATA SSD Expansion Board (Note:Raspberry Pi is Not Included!)
Technology support: wiki.52pi.com/index.php?title=ZP-0140
45,99 € SU AMAZON
Raspberry Pi
Raspberry Pi 4 Modello B (4GB)
Spedizione gratuita
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
SDRAM LPDDR4-3200 da 1 GB, 2 GB, 4 GB o 8 GB (a seconda del modello)
2,4 GHz e 5,0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Gigabit Ethernet
2 porte USB 3.0; 2 porte USB 2.0.
Intestazione GPIO standard a 40 pin Raspberry Pi (completamente compatibile con le schede precedenti)
68,44 € SU AMAZON
raspberry pi 4 sata hat
hat raspberry pi 4
raspberry pi 4 hat
raspberry pi 4 sata
sata raspberry pi 4
raspberry pi sata hat
raspberry pi 4 tv hat
raspberry pi 4 nvme hat
raspberry pi 4 ups hat
poe hat raspberry pi 4