Hat Raspberry Pi 4
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
25 marzo 2025
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SU AMAZON
KEYESTUDIO
KEYESTUDIO Respeaker 2-Mic Pi Hat v1.0 per Raspberry Pi 4 Module Zero e Zero W, Raspberry Pi B +, Raspberry Pi 2B e 3B/4B
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
This is keyestudio respeaker 2-mic pi cappello V1.0 scudo progettato per ai e applicazioni vocali. Si tratta di una bassa potenza stereo Codec basato sul wm8960.
Ci sono due microfoni sullo scudo per il suono Collection, tre apa102 RGB LED, pulsante di un utente e due connettori Grove per estensione di applicazione.
Inoltre, un jack audio da 3.5 mm o XH2.54-2P altoparlante di uscita può essere usato per l' uscita audio.
Con questo prodotto Shield, è possibile costruire una voce più potente e flessibile che si integra Amazon amazona servizi voce, Google Assistant, e molto altro ancora
Supporto tecnico: schema di collegamento, codice di esempio, utilizzando il metodo e le risorse sono forniti nella nostra pagina Wiki. L' assistenza tecnica è disponibile tramite e-mail o messaggio
13,99 € SU AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
IBest
IBest Ethernet/USB HUB Hat for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3X USB Ports Compatible with USB2.0/1.1
Spedizione gratuita
87
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
3x USB ports, compatible with USB2.0/1.1
1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
20,89 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 Case, Raspberry Pi Universal HAT Size Case DIY Kit, Acrylic Case for Raspberry Pi 5 / Raspberry Pi 4B / 3B+ / 3B / 2B and Raspberry Pi Hat Expansion Board
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
It is a universal acrylic case DIY kit to install raspberry pi hat expansion board with Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B together.
This is a Protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.
Compatible with Raspberry Pi 4 Model B/ Pi 3 Model B+ / Pi3 Model B/ 2B / B+ and Pi Hat expansion board (Like X708 UPS/X728 UPS).
Packing List: 1 x Acrylic Case; 1 x Pack of Screws. (The raspberry pi or the expansion board is not included)
8,89 € SU AMAZON
Waveshare
Waveshare USB 3.2 Gen1 HUB HAT for Raspberry Pi 4 with 4X USB 3.2 Gen1 Ports Up to 5 Gbps Data Rate Support Driver-Free Plug and Play USB Capability Expansion Board
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
This is a driver-free 4 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, provides more USB capability to your Pi, make it easy to connect more USB devices. The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.
4x USB 3.2 Gen1 ports, compatible with USB 3.0 / 2.0 /1.1,Onboard external USB-C 5V DC power port, ensures more stable power supply
1x power indicator and 4x USB port indicators, easy to check the operating status
Driver-free, plug and play, compatible with OS including Windows, mac OS, Linux and Android
Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi version as well,Comes with development resources and manual
26,99 € SU AMAZON
innomaker
InnoMaker Raspberry Pi HIFI DAC HAT PCM5122 HIFI DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero etc. (DAC HAT)
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
Absolutely perfect to support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
Comes with software, document and friendly technology support. For more information, please refer to our wiki（view the link on color page comes with the goods).
34,99 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € SU AMAZON
Waveshare
Waveshare SIM7600G-H 4G HAT (B) for Raspberry Pi Supports LTE Cat-4 4G/3G/2G GNSS Positioning Global Band
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
4G HAT FOR RASPBERRY PI,Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning,Based on SIM7600G-H, Global Band
Suitable For Raspberry Pi / PC,Dedicated Pogo Pin For Connecting With Raspberry Pi Zero/Zero W Without Extra USB Cable General Purpose MicroUSB Connector For Other Raspberry Pi Boards Or PC
Global Band 4G / 3G / 2G Support,Up To 50Mbps Uplink And 150Mbps Downlink For 4G Network
USB HUB Feature,Onboard USB HUB Chip With USB2.0/1.1 Compliant, Providing 2x USB-A Connector And 1x USB Solder Pad
GNSS Positioning,Supports GPS, BeiDou, Glonass, LBS Base Station Positioning; Telephoto Call & SMS Support,Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
98,99 € SU AMAZON
raspberry pi 4 hat
raspberry pi 4 dac hat
raspberry pi 4 usb hat
raspberry pi 4 ssd hat
raspberry pi 4 ups hat
ssd hat raspberry pi 4
raspberry pi 4 tv hat
raspberry pi 4 fan hat
raspberry pi 4 hdd hat
raspberry pi 4 hat sata
#1 VINCITORE
