main logo

Sense Hat Raspberry

I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento: 2 febbraio 2025
Raspberry Pi
Raspberry Pi
Raspberry RB-Sense-Hat Sense Hat Modul - Nero    
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • ATTENZIONE! Verifica se i tuoi componenti (memorie RAM, processore) siano compatibile con questa scheda madre prima di acquistarla!
  • Prodotto per giocatori esigenti
  • Qualità di fabbricazione irreprensibile
  • Immersione eccezionale
  • 68,95 € SU AMAZON
Raspberry Pi Press
Raspberry Pi Press
Experiment with the Sense HAT: Sense the real world with your Raspberry Pi (Essentials) (English Edition)
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2
Raspberry Pi Press
Raspberry Pi Press
Experiment with the Sense HAT: Sense the Real World with Your Raspberry Pi (Essentials) (English Edition)
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3
Waveshare
Waveshare
Waveshare 2-DOF Pan-Tilt Hat for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Onboard PCA9685 PWM Chip TSL25911FN 16-bit Ambient Light Sensor Make Pi Camera Move and Sense Light Intensity Via I2C
Spedizione gratuita
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ I2C interface, only 2 pins are required for moving and light intensity sensing
  • Onboard TSL25911FN light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module
  • Onboard PCA9685 chip, provides 12-bit resolution PWM signal for moving control Onboard voltage level translator, compatible with 3.3V/5V operating voltage
  • Specific acrylic board to fix the Raspberry Pi camera, make it easy to install
  • 29,99 € SU AMAZON
IBest
IBest
IBest Ethernet/USB HUB Hat for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3X USB Ports Compatible with USB2.0/1.1
Spedizione gratuita
star

87

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
  • The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
  • 3x USB ports, compatible with USB2.0/1.1
  • 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
  • Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
  • 20,89 € SU AMAZON
KEYESTUDIO
KEYESTUDIO
KEYESTUDIO Respeaker 2-Mic Pi Hat v1.0 per Raspberry Pi 4 Module Zero e Zero W, Raspberry Pi B +, Raspberry Pi 2B e 3B/4B
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • This is keyestudio respeaker 2-mic pi cappello V1.0 scudo progettato per ai e applicazioni vocali. Si tratta di una bassa potenza stereo Codec basato sul wm8960.
  • Ci sono due microfoni sullo scudo per il suono Collection, tre apa102 RGB LED, pulsante di un utente e due connettori Grove per estensione di applicazione.
  • Inoltre, un jack audio da 3.5 mm o XH2.54-2P altoparlante di uscita può essere usato per l' uscita audio.
  • Con questo prodotto Shield, è possibile costruire una voce più potente e flessibile che si integra Amazon amazona servizi voce, Google Assistant, e molto altro ancora
  • Supporto tecnico: schema di collegamento, codice di esempio, utilizzando il metodo e le risorse sono forniti nella nostra pagina Wiki. L' assistenza tecnica è disponibile tramite e-mail o messaggio
  • 13,99 € SU AMAZON
Waveshare
Waveshare
Waveshare USB HUB HAT (B) for Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • ✅Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
  • ✅4x extended USB ports, compatible with USB 2.0 / 1.1
  • ✅Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
  • ✅USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
  • 16,15 € SU AMAZON
Waveshare
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B/3B+, Conforme a IEEE 802.3af, Uscita DC 5V 2.5A, Ventola di Raffreddamento Integrata, Compatibile con Custodia Ufficiale Raspberry Pi 4B/3B+
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • PoE HAT supports Raspberry Pi 4B/3B+, Tailored for Raspberry Pi 4B/3B+ official case
  • PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
  • Power over Ethernet HAT expansion board onboard high speed active cooling fan, better heat dissipation
  • Fully isolated switched-mode power supply (SMPS)
  • By using this PoE HAT (type D) and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • 23,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi 5/4/3/Zero Dual Chips Solution Stackable Design For Expanding Multiple CAN Channels Supports Wide Range Voltage Input of 7~36V
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Standard Pi 40PIN GPIO extension header, compatible with Raspberry Pi/Jetson Nano series boards. Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
  • Onboard unibody power supply isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal. Onboard digital isolator, signal isolation makes the communication more safe and stable, and better anti-interference
  • Onboard external power supply terminal, supports 7~36V wide voltage power input, supports powering the Pi and the HAT at the same time. Onboard SM24CANB TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
  • Onboard voltage translator, select 3.3V/5V operating voltage by jumper. Onboard 120Ω terminal resistor, configured by jumper
  • Breakout SPI and I2C control pins, for connecting with other host control boards. Can provide with online development resources and manual (examples in Python/C)
  • 36,99 € SU AMAZON
Freenove
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
  • Pin Name: The BCM numbering name of each pin is printed next to it
  • 11,95 € SU AMAZON
raspberry sense hat raspberry pi sense hat sense hat raspberry pi sense hat hat raspberry raspberry hat raspberry fan hat raspberry lora hat raspberry zero hat raspberry microphone hat