main logo

Raspberry Zero Hat

I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento: 23 gennaio 2025
IBest
IBest
IBest Ethernet/USB HUB Hat B with Box for Raspberry Pi Zero/Zero W/2 W/Zero WH/2 WH,Ethernet USB HUB Hat with Case, 1x RJ45 Ethernet Port,3X USB Ports Compatible with USB2.0/1.1
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • ETH-USB-HUB-BOX is Designed for Raspberry Pi Zero, compatible with Zero series boards
  • 3x extended USB ports, compatible with USB 2.0 / 1.1.Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
  • Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH.
  • Angle rounded design, smooth hand feeling, "simple snap" case lid. Quality ABS material, dull polish surface, anti-fingerprint
  • Comes with two different lids, changing as you like
  • 23,95 € SU AMAZON
Waveshare
Waveshare
Waveshare USB HUB HAT (B) for Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • ✅Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
  • ✅4x extended USB ports, compatible with USB 2.0 / 1.1
  • ✅Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
  • ✅USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
  • 16,15 € SU AMAZON
IBest
IBest
IBest 2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,62 € SU AMAZON
Waveshare
Waveshare
Waveshare 1.44inch LCD Display HAT Compatible with Raspberry Pi Zero Series Boards, 128x128 Pixels Handheld LCD with Embedded Controller, Communicating Via SPI Interface
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • If you want to get it faster, please refer to B0BFQF5SH5 to get the item which will be shipped from Amazon EU Warehouse(which generally can be delivered within 2-3 days)
  • This is an LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixel, with embedded controller, communicating via SPI interface.
  • Prova ad aggiungere un'interfaccia di controllo per il tuo Pi? Even making the Pi into a handheld game console? Questo display compatto sarà la scelta ideale.
  • Standard Raspberry Pi Connectivity, compatibile con e diretto pluggable onto Raspberry Pi 2B/3B/Zero/Zero W
  • 1 x joystick (5 posizione), 3 x pushbuttons, handy and useful. Comes with development resources and manual (examples for Raspberry Pi)
  • 16,99 € SU AMAZON
IBest
IBest
IBest Ethernet/USB HUB Hat for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3X USB Ports Compatible with USB2.0/1.1
Spedizione gratuita
star

84

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
  • The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
  • 3x USB ports, compatible with USB2.0/1.1
  • 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
  • Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
  • 20,89 € SU AMAZON
Waveshare
Waveshare
RS485 CAN HAT per Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Consenti Comunicazione Lunga Distanza Tramite RS485/CAN Funzione, Integrato MCP2515 CAN Controller con Chip SN65HVD230 e SP3485
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
  • CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
  • RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
  • Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
  • 19,52 € SU AMAZON
Waveshare
Waveshare
Waveshare RS485 CAN HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Allows Stable Long Distance Communication
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • CAN function, onboard CAN controller MCP2515 via SPI interface, with transceiver SN65HVD230
  • RS485 function, controlled via UART, half-duplex communication, with transceiver SP3485
  • Reserved control pins, allows to work with other control boards
  • Comes with development resources and manual (examples in wiringPi/python)
  • 19,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is not included)
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Alimenta il tuo Pi Zero senza problemi dalla connessione di alimentazione o dalle batterie di riserva
  • Supporta la ricarica e l'uscita regolata da 5 V allo stesso tempo, monitoraggio I2C
  • Perni pogo a molla integrati per il collegamento con schede Raspberry Pi serie Zero. Chip di ricarica della batteria Li-Po, con gestione dinamica del percorso, alimentazione più stabile
  • Chip di aumento della tensione, che fornisce un'uscita di potenza regolata da 5 V. Comunicazione bus I2C, monitoraggio della tensione della batteria, corrente, potenza e capacità residua in tempo reale
  • Multi circuiti di protezione della batteria: protezione da sovraccarico/scarica, protezione da sovracorrente e protezione da cortocircuito, più sicuro e stabile. Indicatore di ricarica per monitorare lo stato di funzionamento della batteria. Viene fornito con risorse di sviluppo e manuale
  • 28,99 € SU AMAZON
Freenove
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
  • Pin Name: The BCM numbering name of each pin is printed next to it
  • 11,95 € SU AMAZON
hat raspberry raspberry hat raspberry pi zero hat raspberry microphone hat raspberry 4g hat game hat raspberry raspberry fan hat raspberry game hat raspberry tv hat raspberry lora hat