Poe Hat Raspberry Pi 4
I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento:
11 novembre 2024
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
28,99 € SU AMAZON
DSLRKIT
DSLRKIT Power Over Ethernet Poe Hat IEEE802.3af DC 5V 2.5A with 1.5KV Isolation for Raspberry Pi 4 4B 3B+ 3B Plus
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V~57V Passive Power Over Ethernet PoE Switch; Support 48V~57V Passive Power Over Ethernet PoE injector
Maximum.12Watt DC5V 2.5A
With 1.5KV isolation
Compatible unsolicited Passive PoE switch
11,90 € SU AMAZON
IBest
Power Over Ethernet Hat (B) Poe Hat for Raspberry Pi 4 B/3 B+,802.3af-Compliant,37V ~ 57V DC Input,5V 2.5A DC Input, Onboard 0.91" OLED for Monitoring Processor Temperature, IP Address
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Poe HAT with Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
PoE (Power Over Ethernet) capability，802.3af-compliant.Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins
Fully isolated switched-mode power supply (SMPS)
0.91" OLED, for monitoring processor temperature, IP address, and fan status in real-time
Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch.
30,65 € SU AMAZON
Waveshare
Waveshare Poe Hat for Raspberry Pi 4B 3B+, IEEE 802.3af-Compliant,Power Over Ethernet Hat (E) Expansion Board for Raspberry Pi,5V Power Output
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
PoE (Power Over Ethernet) capability，IEEE 802.3af-compliant
Fully isolated switched-mode power supply (SMPS)
Smaller and more flexible with a more compact component layout
26,50 € SU AMAZON
GeeekPi
GeeekPi Power Over Ethernet Poe Hat Support IEEE 802.3af o 802.3at Poe Standard,con Raspberry Pi Ventola di Raffreddamento 30x30x7mm per Raspberry Pi 4 Modello B / 3B + 3B Plus
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Compatibile con: Raspberry Pi 4 Modello B / Raspberry Pi 3 Modello B +
Ventola di raffreddamento integrata da 30 x 30 x 7 mm
Supporto IEEE 802.3af o 802.3at PoE standard
Circuito di protezione: sovratensione transitoria, blocco di sottotensione, arresto termico, limitazione corrente di ripiegamento
Wiki:https://wiki.52pi.com/index.php/Power-Over-Ethernet_(PoE)_HAT_for_RPi_4B/3B%2B_SKU:_EP-0115
24,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 HAT PoE isolato Supporto standard PoE IEEE 802.3af o 802.3at, con Raspberry Pi Ventola 30x30x7mm e Dissipatore per Raspberry Pi 4 Modello B / 3B + 3B Plus
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Standard : IEEE 802.3af-2003 PoE
Tensione di ingresso: 37 ~ 57 V CC, dispositivo di Classe 2; Tensione di uscita: 5 V CC / 2,5 A.
Raffreddamento: ventola senza spazzole da 30 mm x 30 mm con 4 lavelli
Alimentatore switching completamente isolato
Supporto tecnologico: https://wiki.52pi.com/index.php/RPi_Isolated_PoE_Hat_SKU:_EP-0127
25,18 € SU AMAZON
Waveshare
for Raspberry Pi 4 Case, DIN Rail ABS Case for Raspberry Pi 4 model B, Large Inner Space, Compatible with Raspbeery Pi Expansion Board PoE HAT (D), RS485 CAN HAT, 2-CH RS485 HAT, PI-FAN-3007
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
[DIN Rail ABS Case For Raspberry Pi 4]DIN Rail Mount Support, ABS Material, Clear Top Window, Large Inner Space
[DIN Rail Mount Support]Injection Moduling ABS Body With Rail Mount Support, Easy-To-Use
[Compatible With Various Raspberry Pi HATs]The Large Inner Space Allows Accommodating An Extra Add-On
[Customize Opening Service]Design Your Unique Case, The Opening Is Customizable For 200PCS Or More
12,49 € SU AMAZON
Waveshare
Power Over Ethernet POE HAT per Raspberry Pi 4B/3B+, IEEE 802.3af Conforme Mini POE HAT Supporto Collegamento della Ventola di Raffreddamento, Compatibile con Raspberry Pi Case Ufficiale
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Power over Ethernet HAT for Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case, support connecting cooling fan
PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant, providing both network connection and power supply for your Raspberry Pi in one cable
Fully isolated switched-mode power supply (SMPS)
Smaller and more flexible with a more compact component layout. Dimensions: 65.00 × 32.00mm
PoE power input : 37V ~ 57V DC in, Power output: 5V 2.5A DC out
26,50 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Case, Raspberry Pi 4 Aluminum Case with Fan, Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, High Case Supports POE Hat
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Increased Height Case】This case is higher than normal cases. It is compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, and also supports POE Hat. For Case with ICE Tower Cooler kit, ASIN: B0CC1DGR99
【Easy Access to all Ports】GeeekPi Raspberry Pi 4 Case can accurately access power port, micro HDMI ports, audio port, usb ports, Gigabit Ethernet port, sd card slot.
【Good Cooling Effect】With 40mm quiet cooling fan and aluminum heatsinks provide Raspberry Pi 4 with a good cooling effect.
【High Quality Aluminum Material】GeeekPi Raspberry Pi 4 Case is made of high quality aluminum alloy; Sturdy and durable; Keep your Pi 4 Board free from dust, scratches and damage.
【Good Reception of Signals】With acrylic top panel, it won't block Wifi or Bluetooth signal.
【NOTE】This case is only for GeeekPi POE Hats ( B08MPZD47R and B08CVDQWXF ) and Raspberry Pi Official POE+ HAT.
【WiKi】wiki.52pi.com/index.php?title=ZP-0153
16,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum Case with Passive Cooling,Raspberry Pi 4 POE Hat Case with Raspberry Pi Low-Profile CPU Cooler,Aluminum Heatsink Case for Raspberry Pi 4 Model B 8GB/4GB/2GB
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Light & Compact Pi4 Case】La custodia è leggera e compatta, rende portatile e adatto per proietti che richiedono mobility or space-saving considerations. Offre una bilancia ideale tra protezione e portabilità. The aluminum construction provides sturdy protection for the Raspberry Pi 4B and POE Hat, shielding it from accidental bumps, scratches, and other physical damage. Offre durata e garantisce la sicurezza della tavola durante la gestione regolare o il trasporto.
【Compatibility】The case is specifically designed for the Raspberry Pi 4 Model B 1GB /2GB /4GB /8GB and can also compatible with the PoE Hat Module,and Raspberry Pi Low-Profile CPU Cooler(Included in the Package), ensuring a precise and secure fit. Questo takes into account the dimensions ports, and layout of the Raspberry Pi, providing a customized enclosure that aligns perfectly with the board.
【Modern Aluminum Case with Transparent Acrylic Cover】The aluminum case features a clear acrilico cover that provides a protective barrier while allowing for easy visibility of the Raspberry Pi 4B's components, LED indicators, and any attached accessories or peripherals. It has a sleek and modern design combining both aluminum and acrilic materials that adds an attractive look to your Raspberry Pi setup and complements various environments, including home, office, or educational settings.
【Efficient Heat Dissipation & Quiet Fan】The aluminum material acts as a passive heat sink efficiently dissipating heat generated by the Raspberry Pi 4B components to mantain optimale operating temperatures and prevent overheating. Moreover, a quiet fan within the case further enhances the cooling power by actively drawing heat away from the Raspberry Pi 4B, while operating quietly to minimize noise disruption.
【Facile accesso a porte e GPIO】La custodia è progettata per fornire un facile accesso alle porte Raspberry Pi 4B, incluse USB, Ethernet, HDMI e porte audio. Permette inoltre di accedere perfettamente ai pin GPIO (General-Purpose Input/Output) e facilitare la connettività e l'espansione del Raspberry Pi.
【Facile assemblaggio】La custodia tipicamente dispone di un semplice processo di assemblaggio, consente di installare rapidamente e facilmente il Raspberry Pi 4B senza incastrare. Include hardware di montaggio e istruzioni per la configurazione senza problemi.
29,99 € SU AMAZON
raspberry pi 4 poe hat
hat raspberry pi 4
raspberry pi 4 hat
poe hat raspberry pi
raspberry pi poe hat
poe raspberry pi 4
raspberry pi 4 poe
raspberry pi 4 fan hat
raspberry pi 4 ups hat
raspberry pi 4 tv hat
#1 VINCITORE
