Raspberry 4 Poe
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
24 marzo 2025
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SU AMAZON
REVODATA
REVODATA 2.5G Type C PoE Splitter 5V/4A, 48V PoE a USB-C 5V/4A Uscita 20W, Ethernet 2.5Gbps Conforme IEEE 802.3af/at, Plug-and-Play per Smart Home/Raspberry Pi 4B/4B+ (TYPEC0504G)
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Uscita Type-C 5V/4A:48V PoE convertito in uscita di alimentazione adattativa Type-C (USB C) 5V/4A, la porta Type-C solo per la ricarica di energia.
Velocità 2,5Gbps:Supporta una velocità Internet fino a 2,5Gbps, consentendo al dispositivo di funzionare alla massima velocità. Fornisce una trasmissione Ethernet super veloce senza ritardi.
Facilità di configurazione:facile alimentazione del dispositivo Type-C con funzione plug and play, rilevamento automatico dell'alimentazione da parte dell'apparecchiatura di alimentazione. Fornisce automaticamente l'alimentazione corretta per il dispositivo Type-C.
Protezione multipla:Supporta la protezione del circuito di isolamento, la protezione dal cortocircuito e la protezione da sovratensione, in grado di proteggere efficacemente le apparecchiature.
Come funziona: utilizzando lo switch PoE IEEE802.3af/at o l'iniettore PoE per alimentare lo splitter Type-C (USB C), lo splitter PoE separa l'alimentazione e i dati tramite la porta RJ45 e la porta Type-C, fornendo alimentazione e dati per i dispositivi Type-C con terminale non PoE, come i dispositivi smart home.
15,69 € SU AMAZON
ZDE
ZDE ZC501 Custodia in alluminio per Raspberry Pi 5 2GB/4GB/8GB/16GB Supporto PCIe a M.2 NVMe PoE HAT WiFi7 RS485 RS232 PCIe scheda periferica ZP511/ZP517A/ZP581/ZP590A/ZP592 e Raspberry Pi 5 Active
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Compatibilità: la custodia è specificamente progettata per la scheda Raspberry Pi 5 2GB/4GB/8GB/16GB. Supporta l'installazione di varie schede di espansione SSD PCIe a M.2 NVMe SSD, scudi PoE HAT, schede adattatori WiFi7 e schede di espansione PCIe a RS485 RS232 HAT. Supporta schede periferiche PCIe ZP511/ZP512/ZP513/ZP515/ZP516/ZP517A/ZP580/ZP581/ZP582/ZP590A/ZP590B/ZP592.
Materiale di alta qualità: realizzato in alluminio leggero e resistente, può offrire un'eccellente protezione e dissipazione del calore, protegge la scheda Raspberry Pi 5 da danni, polvere e graffi.
Raffreddatore attivo supportato: supporta l'installazione del dispositivo di raffreddamento attivo ufficiale Raspberry Pi 5 e altre ventole di raffreddamento di terze parti per dissipatore di calore. Per custodia in alluminio con ventola di raffreddamento, fare riferimento a ZP537.
Facile accesso a Pi 5: questa custodia in alluminio può accedere a tutte le porte di Pi 5, tra cui jack di alimentazione USB-C, porte micro HDMI, porte USB, jack Ethernet, slot per schede micro SD, pulsante di accensione, connettori MIPI DSI/CSI a 4 corsie.
Accessori pratici: Fornire 4pcs M2.5x5+5mm distanziatori e 4pcs M2.5x6mm dadi in rame per una facile installazione e fissaggio del Raspberry Pi 5 e schede di espansione. Viene fornito anche un cacciavite.
17,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 11 mm Embedded Dissipatore (P165-B), Raspberry Pi 4B Dissipatore di Calore/Radiatore per Raspberry Pi 4 Modello B & Pi 4 Scheda di Espansione Supporto POE Estensione
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
La nuova versione Geekworm embedded armatura in lega di alluminio dissipatore di calore (P165-B) è progettato solo per Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB versione, dissipatore di calore incorporato con 11mm di spessore. WIKI per riferimento: raspberrypiwiki.com/P165
Supporta il raffreddamento della scheda Raspberry Pi 4 quando si utilizza la scheda di espansione Pi 4 (supporta anche la scheda PoE); è compatibile con Raspberry Pi 4 scheda di espansione per inclinare il problema di surriscaldamento del lampone pi 4, ma è necessario preparare i supporti o le viti adeguate per utilizzare il P165-B con altre schede di espansione.
Dotato solo di 4 distanziatori M2.5X5+6mm per il dissipatore di calore incorporato P165-B, dovrai preparare ulteriori standoff o viti per Raspberry Pi 4 con altre schede di espansione.
Aggiungere un pezzo di nastro termico come regalo in caso di necessità. Ma si consiglia vivamente di utilizzare il grasso della CPU (non incluso) per ottenere una migliore dissipazione del calore.
Supporta l'installazione di una ventola da 30 mm; la ventola di raffreddamento può essere aggiunta quando la dissipazione del calore di un singolo dissipatore di calore in alluminio non è sufficiente, in modo che tutti i problemi di dissipazione del calore Raspberry Pi 4 possano essere risolti.
9,99 € SU AMAZON
DSLRKIT
DSLRKIT Power Over Ethernet Poe Hat IEEE802.3af DC 5V 2.5A with 1.5KV Isolation for Raspberry Pi 4 4B 3B+ 3B Plus
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V~57V Passive Power Over Ethernet PoE Switch; Support 48V~57V Passive Power Over Ethernet PoE injector
Maximum.12Watt DC5V 2.5A
With 1.5KV isolation
Compatible unsolicited Passive PoE switch
11,90 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Case, Raspberry Pi 4 Aluminum Case with Fan, Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, High Case Supports POE Hat
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Increased Height Case】This case is higher than normal cases. It is compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, and also supports POE Hat. For Case with ICE Tower Cooler kit, ASIN: B0CC1DGR99
【Easy Access to all Ports】GeeekPi Raspberry Pi 4 Case can accurately access power port, micro HDMI ports, audio port, usb ports, Gigabit Ethernet port, sd card slot.
【Good Cooling Effect】With 40mm quiet cooling fan and aluminum heatsinks provide Raspberry Pi 4 with a good cooling effect.
【High Quality Aluminum Material】GeeekPi Raspberry Pi 4 Case is made of high quality aluminum alloy; Sturdy and durable; Keep your Pi 4 Board free from dust, scratches and damage.
【Good Reception of Signals】With acrylic top panel, it won't block Wifi or Bluetooth signal.
【NOTE】This case is only for GeeekPi POE Hats ( B08MPZD47R and B08CVDQWXF ) and Raspberry Pi Official POE+ HAT.
【WiKi】wiki.52pi.com/index.php?title=ZP-0153
16,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum Case with Passive Cooling,Raspberry Pi 4 POE Hat Case with Raspberry Pi Low-Profile CPU Cooler,Aluminum Heatsink Case for Raspberry Pi 4 Model B 8GB/4GB/2GB
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Light & Compact Pi4 Case】La custodia è leggera e compatta, rende portatile e adatto per proietti che richiedono mobility or space-saving considerations. Offre una bilancia ideale tra protezione e portabilità. The aluminum construction provides sturdy protection for the Raspberry Pi 4B and POE Hat, shielding it from accidental bumps, scratches, and other physical damage. Offre durata e garantisce la sicurezza della tavola durante la gestione regolare o il trasporto.
【Compatibility】The case is specifically designed for the Raspberry Pi 4 Model B 1GB /2GB /4GB /8GB and can also compatible with the PoE Hat Module,and Raspberry Pi Low-Profile CPU Cooler(Included in the Package), ensuring a precise and secure fit. Questo takes into account the dimensions ports, and layout of the Raspberry Pi, providing a customized enclosure that aligns perfectly with the board.
【Modern Aluminum Case with Transparent Acrylic Cover】The aluminum case features a clear acrilico cover that provides a protective barrier while allowing for easy visibility of the Raspberry Pi 4B's components, LED indicators, and any attached accessories or peripherals. It has a sleek and modern design combining both aluminum and acrilic materials that adds an attractive look to your Raspberry Pi setup and complements various environments, including home, office, or educational settings.
【Efficient Heat Dissipation & Quiet Fan】The aluminum material acts as a passive heat sink efficiently dissipating heat generated by the Raspberry Pi 4B components to mantain optimale operating temperatures and prevent overheating. Moreover, a quiet fan within the case further enhances the cooling power by actively drawing heat away from the Raspberry Pi 4B, while operating quietly to minimize noise disruption.
【Facile accesso a porte e GPIO】La custodia è progettata per fornire un facile accesso alle porte Raspberry Pi 4B, incluse USB, Ethernet, HDMI e porte audio. Permette inoltre di accedere perfettamente ai pin GPIO (General-Purpose Input/Output) e facilitare la connettività e l'espansione del Raspberry Pi.
【Facile assemblaggio】La custodia tipicamente dispone di un semplice processo di assemblaggio, consente di installare rapidamente e facilmente il Raspberry Pi 4B senza incastrare. Include hardware di montaggio e istruzioni per la configurazione senza problemi.
29,99 € SU AMAZON
GeeekPi
GeeekPi Custodia PoE Hat per Raspberry Pi 4B e PoE, custodia in acrilico per cappello PoE e Raspberry Pi 4B/3B+/3B/2B/B+ (Raspberry Pi e cappello POE non inclusi)
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Accesso a tutte le porte della scheda Raspberry Pi, come porta USB, porta Ethernet, porta di alimentazione, slot per schede SD e così via.
Spazio sufficiente per la dissipazione del calore della scheda Raspberry Pi.
È realizzato in materiale acrilico, che è molto facile da installare e può proteggere bene il modulo Raspberry Pi e PoE.
6,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Hat Poe Isolato Supporto Standard Poe IEEE 802.3af o 802.3at, con Raspberry Pi Ventola 30x30x7mm e Dissipatore per Raspberry Pi 4 Modello B / 3B + 3B Plus
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Standard : IEEE 802.3af-2003 PoE
Tensione di ingresso: 37 ~ 57 V CC, dispositivo di Classe 2; Tensione di uscita: 5 V CC / 2,5 A.
Raffreddamento: ventola senza spazzole da 30 mm x 30 mm con 4 lavelli
Alimentatore switching completamente isolato
Supporto tecnologico: https://wiki.52pi.com/index.php/RPi_Isolated_PoE_Hat_SKU:_EP-0127
25,18 € SU AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Cappello per Raspberry Pi 5, con ufficiale Raspberry Pi 5 Active Cooler, Supporto M.2 NVMe SSD 2230 2242 2260 2280
Spedizione gratuita
64
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Questo kit include un P33 M.2 NVME M-Key PoE+ HAT e un ufficiale Raspberry Pi Active Cooler, appositamente progettato per il più recente Raspberry Pi 5 model, prestazioni e compatibilità ottimali.
【High-Speed NVMe SSD Support】The HAT board supporta M.2 NVMe SSDs per accesso e archiviazione di dati veloce.
Interfaccia M.2: utilizza l'interfaccia PCIe per comunicazioni ad alte prestazioni tra SSD e Raspberry Pi.
【PoE HAT Design】 Semplifies power Delivery with Power over Ethernet, eliminating the need for additional power cables.
【802.3at PoE Support】Richiede un interruttore PoE compatibile 802.3at to provide up to 30W of power, ensuring sufficient power for demanding appations.
Massima potenza di consegna: capace di consegnare fino a 25 W a 5.1 V/4.5 A, adatto per l'alimentazione sia del Raspberry Pi che dell'NVMe SSD.
39,99 € SU AMAZON
poe raspberry pi 4
raspberry pi 4 poe
raspberry poe
poe hat raspberry pi 4
raspberry pi 4 poe hat
raspberry pi 4 8gb poe
poe 4
raspberry pi 4 poe case
raspberry pi4 poe
alimentatore poe raspberry