E-paper Display Arduino
I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento:
12 novembre 2024
IBest
IBest 4.2inch E-paper Display Module 400x300 Resolution 3.3V-5V Two-Color E-Ink Display HAT epaper Screen for Raspberry Pi/Arduino/Nucleo Support Full Refresh,SPI Interface
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Onboard voltage translator, compatible with 3.3V/5V MCUs
Ultra low power consumption, basically power is only required for refreshing
No backlight, keeps displaying last content for a long time even when power down
44,15 € SU AMAZON
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
24,99 € SU AMAZON
Waveshare
2.13 inch E-Paper Display Hat (G) 250 x 122 Resolution 3.3 V/5 V Four-Colour e-Ink Display Paper Screen Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, Jetson Nano,Arduino
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
No backlight, keeps displaying last content for a long time even when power down
SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Ultra low power consumption, basically power is only required for refreshing
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
24,99 € SU AMAZON
Waveshare
2.13 Pollici E-Ink HAT Nero Bianco Rosso Giallo 4-Color E-Paper Display per Arduino/Raspberry Pi/Jetson Nano/STM32, Risoluzione 250x122 Pixel, Comunicazione SPI, Compatibile con MCU da 3.3V/5V
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
2.13inch E-Paper HAT, red/yellow/black/white display color, 250×122 resolution, wide viewing angle, low power consumption, basically power is only required for refreshing
2.13inch E-Ink display module onboard 3-wire / 4-wire SPI interface and Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi Zero W/Zero 2 W/Zero WH/4B/3B+/3B/2B, Arduino, Jetson Nano, STM32, etc. controller boards
Onboard voltage translator, compatible with 3.3V/5V MCUs
No backlight, paper-like effect without electricity, keeps displaying last content for a long time even when power down
Provide online development resources and manual, examples for Raspberry Pi/Jetson Nano/Arduino/STM32 etc.
24,99 € SU AMAZON
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller Partial refresh for Raspberry Pi/Jetson Nano/Arduino,Support SPI Interface
Spedizione gratuita
87
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € SU AMAZON
IBest
5.65inch E-paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
The e-paper with advanced Color ePaper (ACeP) technology, supports 7-Color display
Onboard SPI interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.
No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
Onboard voltage translator, compatible with 3.3V / 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Package Content:5.65inch e-Paper Module (F) x1;PH2.0 20cm 8Pin x1
72,99 € SU AMAZON
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 € SU AMAZON
Waveshare
Waveshare 4.2 Inch E-Paper Display Module(B) Kit 400x300 Resolution Red Black White Three-Color E-Ink Screen Electronic Paper Module for Raspberry Pi/Jetson Nano/Arduino/STM32 via SPI Interface
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down ; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Ultra low power consumption, basically power is only required for refreshing;SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
45,99 € SU AMAZON
ARCELI
ARCELI 2 pezzi 16x2 display modulo LCD con interfaccia I2C 2x16 caratteri DC 5V compatibile con Arduino e Raspberry Pi, sfondo blu e caratteri bianchi
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Il display LCD 16x2 è un display LCD compatto con 2x16 caratteri e un'interfaccia I2C che supporta 6 indirizzi I2C selezionabili.
Ampia area di visualizzazione di 64,5 mm x 16 mm per la massima visibilità.
Consente il funzionamento simultaneo di un massimo di 6 display. Il display ampio, luminoso e chiaro (16 caratteri x 2 righe) consente la regolazione del contrasto tramite un potenziometro.
Il modulo LCD I2C può essere saldato in modo rapido e semplice al display e gli indirizzi I2C possono essere modificati tramite i ponti di saldatura.
Display grande, luminoso e chiaro con scritte bianche su sfondo blu.
9,59 € SU AMAZON
Waveshare
Waveshare 4.2inch E-Ink Display Module Resolution 296x128 3.3v E-paper Electronic Screen Panel SPI Interface for Raspberry Pi/STM32/Arduino/Nucleo/Jetson Nano
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download resources: www.waveshare.com/wiki/4.2inch_e-Paper_Module
44,15 € SU AMAZON
e paper display
e-paper display
e paper arduino
e-paper arduino
e-paper display touch
e paper display i2c
display e ink arduino
display e-ink arduino
e ink display arduino
e-ink display arduino
#1 VINCITORE
