E-paper Display
I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento:
12 novembre 2024
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 € SU AMAZON
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller Partial refresh for Raspberry Pi/Jetson Nano/Arduino,Support SPI Interface
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € SU AMAZON
IBest
IBest 2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down
20,62 € SU AMAZON
Waveshare
Waveshare 7.5inch E-Paper Display HAT (B) Module 800x480 Resolution 3.3v E-Ink Electronic Screen SPI Interface Red Black White Three-Color for Raspberry Pi Jetson Nano
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
No backlight, keeps displaying last content for a long time even when power down.
Ultra low power consumption, basically power is only required for refreshing. Wide Viewing Angle, Paper-Like Displaying Without Electricity.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.
72,99 € SU AMAZON
IBest
IBest 2.13inch Passive NFC-Powered e-Paper Black/White e-Ink Display, No Battery Required, Wireless Powering and Data Transfer,Refreshed By Smartphone
Spedizione gratuita
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
2.13" NFC-Powered E-Paper,Adopts Novel Passive NFC Technology,No Battery Required, No More Battery Life Trouble
Wireless NFC-Powered Display Refreshing.Passive NFC Solution, No Battery Required, No Messy Wiring, Stable Operation
No backlight required, e-Paper keep displaying the last content for a long time without power
No power adapter required.Compe with ABS case
You can modify the display content by smartphone.App is provided
34,55 € SU AMAZON
Waveshare
2.9 pollici E-Paper E-Ink Touch Display per Raspberry Pi Pico 296×128 Due Colori Touch epaper Display Modulo Supporto Touch a 5 Punti Aggiornamento Parziale 3.3V Interfaccia SPI/I2C
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
2.9 inch Touch e-Paper Module for Raspberry Pi Pico, 296×128 resolution, black / white E-Ink display, onboard female pin header for direct attaching to Raspberry Pi Pico
2.9 inch capacitive touch ePaper module support 5-points touch, toughened glass touch panel, user-defined wakeup gesture
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI Communication / I2C Touch Port interface, requires minimal IO pins
31,55 € SU AMAZON
Binghe
2.13″ e-Paper Display Module Binghe E-Ink Display epaper Screen Hat SPI Display Module con 250x122 Resolution con Embedded Controller Partial Refresh Compatibile con RasPi/Jetson Nano/Arduino
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Basso consumo energetico】: Il modulo del display E-ink da 2,13 pollici di Binghe utilizza la tecnologia e-ink, consumando energia solo durante i cicli di aggiornamento, con un conseguente consumo energetico minimo.
【Alto contrasto】: E-Paper Display con un display in bianco e nero, questo schermo e-ink offre un elevato contrasto, garantendo una chiara visibilità dei contenuti visualizzati.
【Ampio angolo di visione】: E-Paper Display un ampio angolo di visione con una minima distorsione o alterazione del colore, che consente una visione confortevole da diverse angolazioni.
【Elevata leggibilità】: Simile alla carta, il display e-ink offre un'eccellente leggibilità senza bisogno di retroilluminazione, adatta sia agli ambienti interni che esterni.
【Flessibilità】: Il display e-ink può essere facilmente collegato a Ras Pi o ad altre schede di controllo tramite interfaccia SPI, consentendo una comoda trasmissione e controllo dei dati.
11,59 € SU AMAZON
LUCKFOX
LUCKFOX 2.13inch E-Paper with PCB(V4), 250x122Pixel Screen, Support Local Refresh, Low Power Consumption, Wide Viewing Angle, for Raspberry Pi/Jetson Nano/STM32, for Electronic Shelf Label
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
No backlight is required, and the display content of the last screen can be kept for a long time after power failure. Very low power consumption, which is only used when refreshing
Based on Pi 40PIN GPIO interface design, compatible with Raspberry Pi series motherboards/Jetson Nano
SPI communication interface is reserved to facilitate access to STM32 and other main control boards. On board level conversion chip, compatible with 3.3V and 5V MCU interfaces
Applicable to price labels, asset equipment labels, electronic shelf labels, conference nameplates, etc
Provide complete supporting information manual (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant examples
18,99 € SU AMAZON
Waveshare
2.13 inch E-Paper Display Hat (G) 250 x 122 Resolution 3.3 V/5 V Four-Colour e-Ink Display Paper Screen Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, Jetson Nano,Arduino
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
No backlight, keeps displaying last content for a long time even when power down
SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Ultra low power consumption, basically power is only required for refreshing
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
24,99 € SU AMAZON
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen With Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable For Price Tag, Asset/Equipment Tag, Shelf Label...
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
107,99 € SU AMAZON
e paper display
e-paper display arduino
e-paper display touch
e paper display i2c
e paper
e-paper
android e paper
e ink paper
e-paper e-ink
paper e ink
#1 VINCITORE
