main logo

E Paper Arduino

I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento: 27 marzo 2025
IBest
IBest
IBest 2.9inch E-paper Module 296x128 Resolution 3.3V/5V Two-Color E-Ink Display Module epaper Screen SPI Interface for Raspberry Pi/Arduino/Nucleo Support Partial Refresh
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 2.9inch e-paper Module V2 Version ,SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
2.13 inch E-Paper Display Hat (G) 250 x 122 Resolution 3.3 V/5 V Four-Colour e-Ink Display Paper Screen Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, Jetson Nano,Arduino
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • No backlight, keeps displaying last content for a long time even when power down
  • SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 1.54 inch E-Paper Screen Display Module 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano
Spedizione gratuita
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 19,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module(B) Kit 400x300 Resolution Red Black White Three-Color E-Ink Screen Electronic Paper Module for Raspberry Pi/Jetson Nano/Arduino/STM32 via SPI Interface
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down ; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Ultra low power consumption, basically power is only required for refreshing;SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • 45,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Tri-color 2.13 Inch E-Ink Display Module Three-color Resolution 212x104 3.3v E-paper Electronic Screen Panel with Embedded Controller SPI Interface Support Raspberry Pi/Arduino/STM32/Jetson Nano
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing; Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), download link: www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)
  • 23,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
xicoolee
xicoolee
1.54 Pollici E-Paper Display Tre Colori EPaper Schermo per Raspberry Pi/Arduino/Jetson Nano/STM32 200x200 Pixel Rosso Nero Bianco SPI Interfaccia E-Ink
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Display E-ink da 1,54 pollici per Raspberry Pi, 200 * 200 pixel, può visualizzare tre colori: rosso, nero e bianco
  • Schermo eink da 1,54 pollici, interfaccia SPI, utilizzo minimo del pin
  • Modulo e-paper da 1,54 pollici, traduttore di tensione integrato, compatibile con interfacce microcontrollore da 3,3 V e 5 V
  • Display a colori E, programmi di esempio open source disponibili per schede di sviluppo Raspberry Pi, Arduino, STM32 ed ESP32
  • 27,00 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.3 inch ACeP 7-colour E-paper HAT (with PCB), 800 x 480 resolution, SPI interface, low power consumption, wide viewing angle, paper like, for shelf label/industrial instruments, etc
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Modulo dell'esposizione E-Ink della E-Paper 7 colori ACeP (con scheda del driver del PWB), 800×480 pixel, interfaccia SPI, per il collegamento con le schede del regolatore come Raspberry Pi/Jetson Nano/Arduino/STM32, ecc
  • Adotta la tecnologia Advanced Color ePaper (ACeP), consente di visualizzare sette colori. Applicabile alle etichette dei prezzi, alle etichette delle attrezzature degli asset, alle etichette elettroniche degli scaffali, alle targhette della conferenza, ecc
  • Non è necessaria alcuna retroilluminazione e il contenuto del display dell'ultimo schermo può essere mantenuto a lungo dopo lo spegnimento. Traduttore di tensione a bordo, compatibile con MCU da 3,3 V/5 V
  • Consumo energetico molto basso, che viene utilizzato solo quando si rinfresca. con intestazione standard di estensione Pi 40PIN GPIO, supporta schede serie Raspberry Pi/Jetson Nano
  • Fornire risorse di sviluppo online complete e manuali (schema della scheda driver, esempi per Raspberry Pi/Arduino/STM32)
  • 97,99 € SU AMAZON
e-paper arduino e-paper display arduino arduino e arduino e relè e paper e-paper arduino e robotica e ink arduino e-ink arduino labview e arduino