main logo

E-ink Arduino

I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento: 12 novembre 2024
IBest
IBest
5.65inch E-paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The e-paper with advanced Color ePaper (ACeP) technology, supports 7-Color display
  • Onboard SPI interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Package Content:5.65inch e-Paper Module (F) x1;PH2.0 20cm 8Pin x1
  • 72,99 € SU AMAZON
Binghe
Binghe
2.13" E-Ink LoRa Display Binghe 2.13" E-Ink LoRa Display con ESP32-S3 LoRa Scheda di sviluppo con Scheda acrilica/Cavo della batteria/Antenna Supporto WIFILORA Bluetooth Compatibile con Arduino
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • 【Tecnologia di base e versatilità】: Modulo ESP32-S3 LoRa integrato con chip ESP32-S3FN8 e 1262, supporta WiFi, LoRa e Bluetooth per opzioni di sviluppo flessibili.Compatibile con meshtastick.
  • 【Display di alta qualità】: ESP32-S3 LoRa con display da 250x122 pixel in bianco e nero ad alto contrasto, alta riflettività e angolo di visione ultra ampio per una chiara visibilità in varie condizioni di illuminazione.
  • 【Design a basso consumo energetico】: La scheda ESP32-S3 LoRa con display E-Ink da 2,13” supporta l'alimentazione tramite USB e batteria al litio, con una visualizzazione dei contenuti che dura oltre 180 giorni dopo lo spegnimento.
  • 【Compatibile con più alimentatori】: 2,13 E-ink ESP32-S3 LoRa supporta le interfacce Type-C e batteria al litio con un intervallo di tensione di 3-5V, garantendo un'alimentazione stabile in vari ambienti.
  • 【Funzione di aggiornamento incorporata】: 2.13 elik bianco e nero è dotato di una funzione di aggiornamento parziale dello schermo incorporata, che consente aggiornamenti rapidi con tempi ed energie ridotti per un aggiornamento completo.
  • 28,99 € SU AMAZON
Waveshare
Waveshare
2.13 inch E-Paper Display Hat (G) 250 x 122 Resolution 3.3 V/5 V Four-Colour e-Ink Display Paper Screen Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, Jetson Nano,Arduino
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • No backlight, keeps displaying last content for a long time even when power down
  • SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller Partial refresh for Raspberry Pi/Jetson Nano/Arduino,Support SPI Interface
Spedizione gratuita
star

91

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module(B) Kit 400x300 Resolution Red Black White Three-Color E-Ink Screen Electronic Paper Module for Raspberry Pi/Jetson Nano/Arduino/STM32 via SPI Interface
Spedizione gratuita
star

85

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down ; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Ultra low power consumption, basically power is only required for refreshing;SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • 45,99 € SU AMAZON
IBest
IBest
IBest 4.2inch E-paper Display Module 400x300 Resolution 3.3V-5V Two-Color E-Ink Display HAT epaper Screen for Raspberry Pi/Arduino/Nucleo Support Full Refresh,SPI Interface
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Ultra low power consumption, basically power is only required for refreshing
  • No backlight, keeps displaying last content for a long time even when power down
  • 44,15 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
Waveshare
Waveshare
296x128 Resolution 2.9 Inch E-Paper Display Panel Module 3.3v E-ink Electronic Screen SPI interface with Embedded Controller Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download resources: www.waveshare.com/wiki/2.9inch_e-Paper_Module
  • 23,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Tri-Color 2.9inch E-Ink Display Module Resolution 296x128 3.3v E-Paper Electronic Screen Panel Three-Color SPI Interface for Raspberry Pi/STM32/Arduino/Jetson Nano
Spedizione gratuita
star

73

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download link: www.waveshare.com/wiki/2.9inch_e-Paper_Module_(B)
  • 28,79 € SU AMAZON
Waveshare
Waveshare
2.13 Pollici E-Ink HAT Nero Bianco Rosso Giallo 4-Color E-Paper Display per Arduino/Raspberry Pi/Jetson Nano/STM32, Risoluzione 250x122 Pixel, Comunicazione SPI, Compatibile con MCU da 3.3V/5V
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 2.13inch E-Paper HAT, red/yellow/black/white display color, 250×122 resolution, wide viewing angle, low power consumption, basically power is only required for refreshing
  • 2.13inch E-Ink display module onboard 3-wire / 4-wire SPI interface and Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi Zero W/Zero 2 W/Zero WH/4B/3B+/3B/2B, Arduino, Jetson Nano, STM32, etc. controller boards
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • No backlight, paper-like effect without electricity, keeps displaying last content for a long time even when power down
  • Provide online development resources and manual, examples for Raspberry Pi/Jetson Nano/Arduino/STM32 etc.
  • 24,99 € SU AMAZON
e ink arduino schermo e ink arduino e ink screen arduino arduino e display e ink arduino display e-ink arduino e ink display arduino e-ink display arduino cover e ink cover e-ink