Waveshare Display Raspberry
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
27 marzo 2025
Waveshare
Waveshare 4.3 pollici DSI LCD Display per Raspberry Pi 4B, 800×480 IPS Schermo Monitor Capacitivo Touchscreen con Custodia, Supporta Raspbian/Ubuntu/Kali / WIN10 IoT
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
4.3inch capacitive touch display for Raspberry Pi 4B, IPS screen with protection case, 800x480 hardware resolution, wide angle, toughened glass panel
MIPI DSI interface, refresh rate up to 60Hz
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
49,49 € SU AMAZON
Waveshare
Waveshare 3.5inch Display for Raspberry Pi 4 Resistive Touchscreen 480×320 Pixel IPS Monitor SPI Interface Directly-pluggable for All Raspberry Pi Raspbian/Ubuntu Mate/Ubuntu/Kali Driver Provided
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
480x320 hardware resolution; Resistive touch control;
Supports any revision of Raspberry Pi (directly-pluggable)
Drivers provided (works with your own Raspbian/Ubuntu/Kali);Supports FBCP software driver as well, allows to config software resolution and set up dual-display
IPS technology, high quality and perfect displaying from very wide viewing angle; Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+);High quality immersion gold surface plating
Combined with the Raspberry Pi, allows you to: Take photos by touching (up to 17 camera modes);Use software keyboard (system interaction without keyboard/mouse)
35,99 € SU AMAZON
Waveshare
Waveshare Raspberry Pi 5inch Capacitive 5-Points Touch Display, Support 800×480 Resolution with DSI Interface Low Power Consumption
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/CM3/3+ requires extra adapter board
Adjustable Brightness Via Software
46,99 € SU AMAZON
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 € SU AMAZON
Waveshare
Waveshare 7.9inch Capacitive LCD HDMI Display 400×1280 Resolution IPS Touch Screen with Toughened Glass Cover Supports All Versions of Raspberry Pi Jetson Nano Windows 11/10/8.1/8 /7
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
The display orientation is portrait by default, 400×1280 resolution (H×V). Change the software config for landscape display.
Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Ubuntu, single point touch, driver free
Supports Windows 11/ 10 / 8.1 / 8 / 7, 5-points touch, driver free
Supports Retropie, driver free.Supports all versions of Raspberry Pi
99,99 € SU AMAZON
Waveshare
Waveshare 4.3inch Capacitive Touch Display for Raspberry Pi with Protection Case 800×480 Resolution IPS Wide Angle MIPI DSI Interface,Compatible with Raspberry Pi 4 ONLY
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Note：The case can compatible with Raspberry Pi4B only,other Raspberry pi models can choose the version not include the case. Supports Raspberry pi, 5-points touch, driver free.
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free.
Supports Retropie, driver free. Supports Pi 4B/3B+/3B.
Raspberry Pi is NOT included.
The case is 3D-printed, so you may feel the surfaces is a little bit rough, please make sure you don't mind it before purchasing.
49,99 € SU AMAZON
Waveshare
Waveshare 7inch HDMI Display Capacitive Touch LCD 1024X600 Resolution IPS Screen Latest Version Supports All Versions of Raspberry Pi Windows Monitor
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
<b>MULTIPLE APPLICATION</b> Supports all versions of Raspberry Pi. Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free. Supports Windows 11 / 10 / 8.1 / 8 / 7, 5-points touch, driver free.
<b>WIDER VIEWING ANGLE</b> This 7inch IPS Capacitive Touch Screen LCD with 1024×600 Resolution Provides Wider Viewing Angle. VCOM voltage adjustment for optimizing display effect.
<b>LOWER POWER CONSUMPTION</b> Backlight adjustment solder pads for PWM signal input, so as to control the backlight brightness, increasing the lifetime of the display and saving power.
<b>CAPACITIVE TOUCH</b> Up to 5-points touch, depending on the operating system. USB protocol translator, converting the touch signal into standard multi-points touch protocol to achieve smooth multi-points touch control.
<b>PLUG & PLAY</b> This Raspberry Pi touch screen equipped an USB touch port and a HDMI display port. USB and power input solder pads, breakout USB interface, easy for connecting external power supply.
64,99 € SU AMAZON
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € SU AMAZON
Waveshare
Waveshare Raspberry Pi 1.3inch IPS LCD Display HAT, 240x240 Pixels with embedded controller, communicating via SPI interface
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work.
This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
IPS screen, wide viewing angle, better display High definition in small size 1x joystick, 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi)
Driver: ST7789;Display color: RGB, 65K color;perating voltage: 3.3V
19,99 € SU AMAZON
Waveshare
Waveshare 2PCS 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122 Resolution SPI Interface Supports Partial Refresh
Spedizione gratuita
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
2PCS Version, Provide online user manual, please check the manual carefully before using!
IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4 are screen versions, and V4 is currently being shipped. V4 version is fully compatible with V3; and it provides the demo that can realize a fast refreshing function.
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
37,99 € SU AMAZON
raspberry pi display waveshare
display raspberry
raspberry display
raspberry waveshare
waveshare raspberry
waveshare display
display hdmi raspberry
display raspberry hdmi
raspberry hdmi display
raspberry dac display
#1 VINCITORE
