Ups 5v Raspberry
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
28 marzo 2025
Waveshare
Waveshare UPS HAT (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € SU AMAZON
Geekworm
Geekworm X1200 5V UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs
【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1200 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1200-C1 Case (ASIN: B0D4Z7NDNP)
52,89 € SU AMAZON
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is not included)
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Alimenta il tuo Pi Zero senza problemi dalla connessione di alimentazione o dalle batterie di riserva
Supporta la ricarica e l'uscita regolata da 5 V allo stesso tempo, monitoraggio I2C
Perni pogo a molla integrati per il collegamento con schede Raspberry Pi serie Zero. Chip di ricarica della batteria Li-Po, con gestione dinamica del percorso, alimentazione più stabile
Chip di aumento della tensione, che fornisce un'uscita di potenza regolata da 5 V. Comunicazione bus I2C, monitoraggio della tensione della batteria, corrente, potenza e capacità residua in tempo reale
Multi circuiti di protezione della batteria: protezione da sovraccarico/scarica, protezione da sovracorrente e protezione da cortocircuito, più sicuro e stabile. Indicatore di ricarica per monitorare lo stato di funzionamento della batteria. Viene fornito con risorse di sviluppo e manuale
28,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentatore UPS HAT, Supporto 18650 Caricabatteria Power Bank Power Management Scheda di espansione 5V per Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
15% Sconto
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
UPS Plus è una nuova generazione di moduli di gestione dell'alimentazione UPS che supporta l'aggiornamento del firmware OTA e supporta l'RTC integrato.
Ci sono due chip INA219 a bordo per rilevare la tensione delle batterie e la tensione in uscita da UPS Plus a Raspberry Pi.
Compatibile con Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
La confezione include: 1 x UPS Plus per Raspberry Pi, 4 x M2.5 pilastri in rame, 4 x M2.5 viti, 4 x M2.5 stick di rame lungo, 4 x M2.5 dadi, 1 x schermo acrilico, 1 x istruzioni
Come usare, fare riferimento a wiki.52pi.com/index.php?title=EP-0136
39,09 € SU AMAZON
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Spedizione gratuita
87
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
46,99 € SU AMAZON
IBest
ups Hat (B) for Raspberry Pi Uninterruptible Power Supply with I2C Bus Communication,5V Power Output, up to 5A Current,Multi Battery Protection Circuits
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
This UPS HAT is Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi.5V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly.Comes with development resources and manual
34,95 € SU AMAZON
Waveshare
Waveshare Raspberry Pi Uninterruptible Power Supply UPS HAT Stable 5V Power Output Multi Battery Protection Circuits
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
33,95 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (Max 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € SU AMAZON
Geekworm
Geekworm X1201 Ultra-thin 18650 UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile & Ultra-thin Design】X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1201 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1201-C1 Case (ASIN: B0D4Z92TBB)
54,89 € SU AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-thin UPS Shield for Raspberry Pi Zero 2 W
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,89 € SU AMAZON
raspberry ups
ups raspberry
ups 5v
12v 5v raspberry
ups 5v usb
ups usb 5v
raspberry pi ups
ups raspberry 4
ups raspberry pi
ups telecamera 5v
#1 VINCITORE
