Raspberry Ups
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
24 marzo 2025
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (Max 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € SU AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-thin UPS Shield for Raspberry Pi Zero 2 W
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W;2. Removed 3 standard USB-A 2.0 ports;3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,89 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
Waveshare
Waveshare UPS HAT (D) for Raspberry Pi, Supports 21700 Li Battery (NOT Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging & Power Output At the Same Time
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Onboard Li battery charging chip, with dynamic path management, more stable power supply. Onboard MCU management, supports detecting power connection and booting the Pi
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
Onboard LED indicators for monitoring the battery operating status. Supports displaying battery level on the system, easy to check the battery remaining capacity
Onboard boost converter chip for stable 5V power output. Provide with online development resources and manual(Obtain from 24hour customer service)
35,99 € SU AMAZON
Waveshare
Waveshare UPS HAT (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € SU AMAZON
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
46,99 € SU AMAZON
SUNFOUNDER
SunFounder Raspberry Pi 4 UPS Alimentatore, Custodia in Acrilico, Protegge Raspberry Pi e Dati, 5V/3A 2000mAh, Battery Pack, Compatibile con Raspberry Pi 4B/3B+/3B/Zero 2W/Arduino/ESP32/Pico W
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Gestione dell'alimentazione superiore Offre una robusta uscita 5V/3A, ideale per Raspberry Pi 4, garantendo una potenza stabile e affidabile sotto carichi elevati. Dispone di una custodia protettiva in acrilico e di una protezione avanzata della batteria, tra cui sovraccarico, sovrascarica e surriscaldamento.
Monitoraggio e controllo intelligenti Il microcontroller RISC-V a 32 bit di PiPower 3 utilizza I2C per monitorare tensioni, livelli della batteria e stato di carica. Supporta lo spegnimento automatico a bassa tensione e l'accensione quando viene ripristinata l'alimentazione esterna.
Compatibilità migliorata Si integra con Raspberry Pi GPIO, USB Type-A e 2x4P header, rendendolo ideale per Raspberry Pi, Banana Pi, ODROID-C4, scheda computer Libre, Arduino, Pico ed ESP32. Fornisce un supporto di alimentazione affidabile per vari SBC.
Funzioni intuitive Include indicatori per il livello della batteria, la sorgente di ingresso, lo stato dell'alimentazione, l'inversione di polarità e la potenza di uscita. Dispone di un pulsante di spegnimento sicuro per un controllo flessibile e comodo dell'alimentazione.
Soluzione UPS affidabile Garantisce transizioni di alimentazione fluide durante le interruzioni, proteggendo i progetti da arresti imprevisti. Fornisce alimentazione ininterrotta e protegge il dispositivo e i dati durante le interruzioni.
39,99 € SU AMAZON
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is not included)
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Alimenta il tuo Pi Zero senza problemi dalla connessione di alimentazione o dalle batterie di riserva
Supporta la ricarica e l'uscita regolata da 5 V allo stesso tempo, monitoraggio I2C
Perni pogo a molla integrati per il collegamento con schede Raspberry Pi serie Zero. Chip di ricarica della batteria Li-Po, con gestione dinamica del percorso, alimentazione più stabile
Chip di aumento della tensione, che fornisce un'uscita di potenza regolata da 5 V. Comunicazione bus I2C, monitoraggio della tensione della batteria, corrente, potenza e capacità residua in tempo reale
Multi circuiti di protezione della batteria: protezione da sovraccarico/scarica, protezione da sovracorrente e protezione da cortocircuito, più sicuro e stabile. Indicatore di ricarica per monitorare lo stato di funzionamento della batteria. Viene fornito con risorse di sviluppo e manuale
28,99 € SU AMAZON
PI PISUGAR
Pisugar2 Plus - Modulo di alimentazione portatile da 5000 mAh per batteria al litio UPS per ogni modello Raspberry Pi 3B/3B+/4B (non include Raspberry Pi)
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Funzionamento continuo: PiSugar2 fornisce la funzione UPS. Può anche spegnersi in modo sicuro quando l'alimentazione è troppo bassa per evitare la perdita di dati e danni causati da un'improvvisa interruzione di corrente.
Elegante esperienza: controlla il modulo attraverso un'interfaccia web grafica ben progettata. È possibile ottenere il livello di potenza e lo stato di carica, configurare l'alimentazione di temporizzazione, funzioni pulsante personalizzate, spegnimento automatico a bassa potenza, ecc.
RTC integrato: l'RTC integrato consente di ottenere in tempo reale in qualsiasi condizione di rete. Viene fornita anche la funzione di avvio temporizzato.
Uso multiplo: ricarica tramite porta TypeC (compatibile con e-mark) o porta microUSB. PiSugar2 Pro adotta la spina della batteria standard PH2.0, puoi anche sostituire altre batterie al litio con uscita da 3,7 V in base alle tue esigenze.
Potenza estensibile: i cuscinetti di ingresso/uscita sono forniti sul circuito stampato, che può essere dotato di qualsiasi dispositivo di ricarica standard da 5 V, come pannelli solari e ricarica wireless QI.
75,19 € SU AMAZON
IBest
ups Hat (B) for Raspberry Pi Uninterruptible Power Supply with I2C Bus Communication,5V Power Output, up to 5A Current,Multi Battery Protection Circuits
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
This UPS HAT is Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi.5V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly.Comes with development resources and manual
34,95 € SU AMAZON
ups raspberry
raspberry ups hat
raspberry pi ups
ups 5v raspberry
ups raspberry pi
raspberry alimentatore ups
ups raspberry 4
ups per raspberry
raspberry
raspberry pi 5 ups