Raspberry Shield Sata
I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento:
24 gennaio 2025
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
37,89 € SU AMAZON
Geekworm
Geekworm X825-C8 Case, Only Support X825 V2.0 2.5 Inch SATA SSD/HDD Shield & Raspberry Pi 4 & X735 (Raspberry Pi / X825 / X735 Not Included)
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Packing List】X825-C8 Metal Case x 1, Momentary Power Switch x 1, 4010 Cooling Fan x 1
【Application】for use with Raspberry Pi 4 with X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board (ASIN: B091JSRQ9C) and X735 (ASIN: B07NLR49L1)
【Note】NOT include Raspberry Pi 4 / X825 / X735/ SSD / HDD!
【Supported SSD (Not included)】Support Max 9.5mm thickness 2.5 inch SATA HDD/SSD installation
【About WiFi Description】USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So please use Ethernet or WIFI 5G AP if you find the 2.4G signal is unstable. (Pls refer to WiKi X825#Document)
22,89 € SU AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Geekworm
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board with USB 3.1 Connector Support Key-B 2280 SSD
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Important Note】Pls format the new SSD before use.
【Raspberry Pi 4 NGFF SATA SSD Shield】X862 V2.0 Adapter supports M.2 NGFF SSD Key-B 2280 length for Raspberry Pi 4 8GB/4GB/2GB/1GB (NOT include Raspberry Pi board or SSD). UASP supported, NOT support TRIM
【How to Power】√ Model 1. power via Raspberry Pi 4: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK); √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Allows booting OS from HDD/SSD 】Booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot)
【Matching Metal Case(not included)】No matching case now. X857-C3 Case (ASIN: B08VJC5CD4) for X862 and Raspberry Pi 4 is out of stock and off-production.
31,89 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi Mini Tower NAS, Raspberry Pi ICE Tower Cooler con ventola PWM RGB, scheda di espansione SSD M.2 SATA, scheda di espansione GPIO da 1 a 2 per Raspberry Pi 4 modello B 2 GB 4 GB 8
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Questo kit Raspberry Pi Mini Tower NAS include una scheda di espansione SSD SATA M.2, che può espandere l'archiviazione di massa per il tuo Raspberry Pi. La custodia è realizzata in materiale ABS, questo kit trasforma il tuo Raspberry Pi in un mini host mobile. Per il kit Mini Tower NAS con custodia in ABS per Raspberry Pi con alimentatore di ricarica rapida QC3.0, fare riferimento all'ASIN: B09LD3JQGV
Nota: la luce RGB nella ventola e la luce d'atmosfera si accendono solo quando il driver è installato, e OLED non visualizzerà alcuna informazione fino a quando non lo abiliti!!! Si prega di leggere attentamente il manuale e seguire i passaggi per abilitarlo. Si prega di acquistare un dispositivo di archiviazione di massa SSD M.2 SATA 2280, non supporta NVME SSD! ! !
Lo schermo OLED da 0,96 pollici era già montato sulla custodia. 28x64 pixel, indirizzo I2C standard: 0x3C
Scheda adattatore di archiviazione di massa M.2 SATA SSD 2280/2260/2240, supporta fino a 2TB M2. Unità a stato solido SSD SATA
Materiale principale: 1 x ABS Mini Tower Case, 1 x ICE Tower CPU Fan, 2 x Pannello laterale acrilico, 1 x 0.96 OLED Display (già montato sulla custodia), 1 x GPIO Edge Expansion Card, 1 x M. 2 SATA SSD Shield, 1 x Istruzioni di montaggio (Nota: Raspberry Pi 4B non è incluso)
60,99 € SU AMAZON
GeeekPi
GeeekPi Per Raspberry Pi 4,X862 V2.0 M.2 NGFF SATA SSD scheda di espansione con porta USB 3.1, supporto solo Key-B 2280 SSD
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
X862 V2.0 è alimentato tramite il connettore USB 3.0. Utilizzando un distanziatore in rame più corto per collegare Raspberry Pi 4 e X862 V2.0, riducendo l'altezza dell'intero prodotto.
Fornisce una scheda di espansione SATA SSD con interfaccia M.2/NGFF SSD Key-B 2280.
Supporta solo Raspberry Pi 4B.
Compatibile solo con M.2 NGFF 2280 Key-B 2280 lunghezze
Supporta solo UASP, non supporta TRIM..Supporta la tecnologia: wiki.52pi.com/index.php/X862_SKU:_EZ-0096. Contenuto della confezione: 1 x X862 V2.0 M.2 NGFF SATA SSD Shield, 1 x adattatore USB 3.1 (connettore USB), 4 x viti M2,5 x 6 mm, 4 x pilastro in rame M/F M2,5 x 7 + 6 mm, 4 x pilastro in rame F/F M2,5 x 9,5 mm, 1 mm, 1 mm, 1 mm mm, 1 caccia. is, 1 x . M2 x 4. mm (per fissare unità SSD), 4 dissipatori, 1 piastra inferiore trasparente
39,97 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
43,00 € SU AMAZON
KEYESTUDIO
KEYESTUDIO 5PCIE-M.2NVME SSD Shield per Raspberry Pi 5 (Pi5 Non Sono Incluse)
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports：2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it：New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Toturiali link-https://bit.ly/4eSOPE7
14,31 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 Scheda di espansione HDD/SSD SATA da 2,5 pollici per Raspberry Pi 4 (non include Raspberry Pi o HDD/SSD)
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
36,89 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum NAS Case with PWM Fan and M.2 SATA SSD Adapter Board,Raspberry Pi 4 Passive Aluminum Case with 3510 Ultra-Quiet Cooling Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4 Model B --- This aluminum Case contains an Armor Lite Aluminum Heatsink and an M.2 SATA SSD expansion board,is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version.
The Case With High quality aluminium material --- sturdy and durable,It can protect the Raspberry Pi well and keep your Raspberry Pi 4 free from scratches, dust and damage.
With an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi
Good Heat Dissipation Effect --- With 3510 Ultra-Quiet Cooling Fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly. Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS.
We strongly recommend using the official Raspberry Pi operating system, which can directly configure the fan to adjust the speed according to the CPU temperature through the raspi-config command.Other operating systems may require you to write software yourself and send PWM signals to the fan through GPIO pins to control fan’s speed.
Package Includes: 1x Aluminum Case,1x 3510 Ultra-Quiet Cooling Fan,1x M.2 SATA SSD Expansion Board (Note:Raspberry Pi is Not Included!)
Technology support: wiki.52pi.com/index.php?title=ZP-0140
45,99 € SU AMAZON
raspberry shield
raspberry sata
sata raspberry
raspberry pico shield
raspberry 3 sata
#1 VINCITORE
