Raspberry 5 Sata
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
17 febbraio 2025
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
37,89 € SU AMAZON
ODSS
Raspberry Pi 5 Penta SATA HAT, fino a 5 dischi SATA HAT
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Confezione: 1 cappello Penta SATA
Perfettamente supportato da Raspberry Pi serie 5
La soluzione perfetta per server NAS: 4 SATA + 1 interfaccia eSATA
Ulteriori interfacce di espansione: progettato per supportare display OLED e ventola
Opzioni di interfaccia di alimentazione flessibile: interfaccia di alimentazione ATX standard o interfaccia di alimentazione CC 12V
117,60 € SU AMAZON
KingData
KingData Cavo SATA, Adattatore Convertitore SATA a USB Lettore di Hard Disk SATA III, Compatibile con HDD e SSD da 3.5 e 2.5 Pollici, per Laptop, Raspberry Pi 4, Crucial, WD, Seagate, Toshiba 3.5"
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
[5 Gbps con accelerazione UASP]: Supporta velocità di trasferimento dati fino a 5 Gbps, retrocompatibile con USB 2.0/1.1. Questo adattatore SATA a USB integra la tecnologia UASP, offrendo velocità di lettura e scrittura più rapide rispetto al convenzionale USB 3.0 quando tutti i dispositivi collegati supportano UASP. 【Nota: La velocità di trasferimento effettiva dipenderà dalle capacità del tuo dispositivo.】
[Design user-friendly]: Le luci LED integrate fungono da indicatori dello stato di funzionamento del lettore esterno SATA USB. Inoltre, l'adattatore USB SATA SSD dispone di una modalità di sospensione automatica, contribuendo a prolungare la durata del disco rigido.
[Ampia compatibilità]: Compatibile con la maggior parte degli HDD (Hard Disk Drive) SATA III/II/I da 2.5" e degli SSD (Solid State Drive), oltre agli HDD da 3.5". Questo adattatore funziona perfettamente con dispositivi dotati di USB-A, inclusi laptop, tablet, desktop, HDTV e router. Per gli smartphone è necessaria la funzione OTG (il convertitore da USB-A all'interfaccia del telefono non è incluso). È richiesta l'alimentazione per gli HDD da 3.5".
[Sistemi compatibili]: Il convertitore da USB-A a SATA è altamente compatibile con vari sistemi, come Microsoft Windows 11/10/8/8.1/7/Vista/XP o successivi, Mac OS 9, 10, 11 o successivi, Linux, Chrome OS, Android, Harmony OS, ecc.
[Applicazioni versatili]: Collega facilmente il tuo SSD/HDD da 2.5" e l'HDD da 3.5" a PC, laptop, PS4, TV o router per espandere lo storage, aggiornare i sistemi, eseguire il backup dei file, recuperare dati e trasferirli. Ideale per avviare vecchi HDD/SSD e recuperare file essenziali da un PC malfunzionante. Il pacchetto include: 1 х adattatore USB 3.0 a SATA e 1 х alimentatore.
14,99 € SU AMAZON
GeeekPi
GeeekPi Per Raspberry Pi 4,X862 V2.0 M.2 NGFF SATA SSD scheda di espansione con porta USB 3.1, supporto solo Key-B 2280 SSD
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
X862 V2.0 è alimentato tramite il connettore USB 3.0. Utilizzando un distanziatore in rame più corto per collegare Raspberry Pi 4 e X862 V2.0, riducendo l'altezza dell'intero prodotto.
Fornisce una scheda di espansione SATA SSD con interfaccia M.2/NGFF SSD Key-B 2280.
Supporta solo Raspberry Pi 4B.
Compatibile solo con M.2 NGFF 2280 Key-B 2280 lunghezze
Supporta solo UASP, non supporta TRIM..Supporta la tecnologia: wiki.52pi.com/index.php/X862_SKU:_EZ-0096. Contenuto della confezione: 1 x X862 V2.0 M.2 NGFF SATA SSD Shield, 1 x adattatore USB 3.1 (connettore USB), 4 x viti M2,5 x 6 mm, 4 x pilastro in rame M/F M2,5 x 7 + 6 mm, 4 x pilastro in rame F/F M2,5 x 9,5 mm, 1 mm, 1 mm, 1 mm mm, 1 caccia. is, 1 x . M2 x 4. mm (per fissare unità SSD), 4 dissipatori, 1 piastra inferiore trasparente
39,97 € SU AMAZON
Geekworm
Geekworm X825-C8 Case, Only Support X825 V2.0 2.5 Inch SATA SSD/HDD Shield & Raspberry Pi 4 & X735 (Raspberry Pi / X825 / X735 Not Included)
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Packing List】X825-C8 Metal Case x 1, Momentary Power Switch x 1, 4010 Cooling Fan x 1
【Application】for use with Raspberry Pi 4 with X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board (ASIN: B091JSRQ9C) and X735 (ASIN: B07NLR49L1)
【Note】NOT include Raspberry Pi 4 / X825 / X735/ SSD / HDD!
【Supported SSD (Not included)】Support Max 9.5mm thickness 2.5 inch SATA HDD/SSD installation
【About WiFi Description】USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So please use Ethernet or WIFI 5G AP if you find the 2.4G signal is unstable. (Pls refer to WiKi X825#Document)
22,89 € SU AMAZON
Freenove
Freenove M.2 NVMe SSD Adapter for Raspberry Pi 5, M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 3.0, 1231MB/s
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Big Upgrade -> Boost your system to an amazing speed by upgrading memory card (104MB/s max) to SSD (PCIe 2.0: 500MB/s max, PCIe 3.0: 1231MB/s max). (Note: Usually unable to reach maximum speed due to various limitations.) (Note: Raspberry Pi states that PCIe 3.0 may be unstable.)
Compatible SSDs -> M.2 NVMe SSDs are compatible, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280. (Note: NOT compatible with M.2 SATA SSDs.)
Two Uses -> Used as system disk or regular hard drive. Provide detailed tutorial. (Download needed, no paper tutorial.)
Easy to Use -> Just tighten the screws and connect the ribbon cable. (Simple configuration needed, see tutorial.)
Compatible models -> Raspberry Pi 5 only. (Note: NOT compatible with any other Raspberry Pi models.)
9,95 € SU AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Geekworm
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board with USB 3.1 Connector Support Key-B 2280 SSD
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Important Note】Pls format the new SSD before use.
【Raspberry Pi 4 NGFF SATA SSD Shield】X862 V2.0 Adapter supports M.2 NGFF SSD Key-B 2280 length for Raspberry Pi 4 8GB/4GB/2GB/1GB (NOT include Raspberry Pi board or SSD). UASP supported, NOT support TRIM
【How to Power】√ Model 1. power via Raspberry Pi 4: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK); √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Allows booting OS from HDD/SSD 】Booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot)
【Matching Metal Case(not included)】No matching case now. X857-C3 Case (ASIN: B08VJC5CD4) for X862 and Raspberry Pi 4 is out of stock and off-production.
31,89 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi Mini Tower NAS Kit,Raspberry Pi ICE Tower Cooler con Raspberry Pi Ice Tower Case,Ventola RGB,M.2 SATA SSD Scheda solo per Raspberry Pi 4 Modello B
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Questo kit Raspberry Pi Mini Tower NAS contiene una scheda di espansione SSD SATA M.2 che può espandere la memoria di massa per il tuo Raspberry Pi. La custodia è realizzata in materiale ABS, questo kit trasforma il tuo Raspberry Pi in un mini-host mobile.
NOTA: la luce RGB nella ventola e la luce d'atmosfera non si accendono a meno che non sia installato il driver e l'OLED non visualizzerà alcuna informazione fino a quando non lo avrai abilitato !!! Si prega di leggere attentamente il manuale e seguire i passaggi per abilitarlo. Si prega di acquistare il dispositivo di archiviazione di massa M.2 SATA SSD 2280, NON supporta SSD NVME!!!
Lo schermo OLED da 0,96 pollici era già montato sulla custodia.28x64pixel, indirizzo I2C predefinito: 0x3C
Scheda adattatore di archiviazione di massa M.2 SATA SSD 2280/2260/2240, supporta fino a 2 TB M2. Unità SSD SATA SSD
La confezione include: 1 x mini case in ABS, 1 x ventola di raffreddamento della CPU ICE-Tower, 2 x pannelli laterali in acrilico, 1 x display OLED da 0,96 pollici (già montato sulla custodia), 1 x scheda di espansione GPIO Edge, 1 x M. 2 schermature SSD SATA, 1 x alimentatore QC 3.0, 1 x manuale di montaggio (Nota: Raspberry Pi 4B non è incluso nella confezione)
Supporto tecnologico: https://wiki.52pi.com/index.php?title=ZP-0130
69,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
64
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
raspberry pi 5 sata
sata raspberry pi 5
sata 5
raspberry 5 sata hat
raspberry sata
sata raspberry
raspberry 5
raspberry pi 5 sata case
raspberry pi 5 sata 3.5
raspberry nas sata 3.5