Raspberry Nvme Hat
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
2 giugno 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Waveshare
Waveshare PCIe to 2-CH M.2 HAT+ Adapter Type B Compatible with Raspberry Pi 5, Support 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive High-Speed Reading/Writing NVMe HAT
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
PCIe To 2-Ch M.2 Adapter Type B For Raspberry Pi 5, Compatible With 2280 / 2260 / 2242 / 2230 Size NVMe Protocol M.2 Solid State Drive , 5Gbps Data Rate, High-Speed Reading/Writing, Raspberry Pi 5 NVMe HAT.Adopts Anti-Oxidation Immersion Gold Process
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【Dual NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi , Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status. 【Onboard Power Monitoring Chip And EEPROM】Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
27,99 € SU AMAZON
Raspberry Pi
M.2 HAT+ pour Raspberry Pi 5
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
W128907668
17,01 € SU AMAZON
GeeekPi
GeeekPi N05 M.2 M-Key NVMe Hat per Raspberry Pi 5, M.2 2242 PCIe a NVMe SSD Shield Pip PCIe Scheda periferica Superiore per Raspberry Pi 5 4 GB/8 GB (Le schede SSD e Pi5 Non Sono Incluse)
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Compatibilità --- L'adattatore N05 M.2 da NVMe a PICe è progettato per Raspberry Pi 5. Supporta l'installazione di unità NVMe (chiave M) in formato M.2, dimensioni 2230 e 2242. Viti di montaggio SSD CNC personalizzato aggiuntivo, nessuna saldatura richiesta.
Supporto PCIe --- Interfaccia PCIe x1 negli standard Gen2 e Gen3.
Linee di segnale ultra-corte PCIe --- Il routing di traccia breve PCIe è più affidabile e veloce e soddisfa pienamente i requisiti di segnale di PCIe 3.0.
Sistema di alimentazione conforme a M.2 --- Regolatore di tensione integrato che fornisce fino a 3 A per la barra di alimentazione da 3,3 V, conforme a M.2 (NGFF).
Tutti gli accessori necessari inclusi --- Viene fornito con nastro PCIe FPC, viti M2 e M2.5, distanziatori e vite di montaggio CNC SSD personalizzata aggiuntiva.
19,99 € SU AMAZON
GeeekPi
GeeekPi Custodia in metallo per Raspberry Pi 5, con ufficiale Raspberry Pi M.2 Hat+ and Active Cooler, supporto M.2 SSD 2230/2242
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Questo kit include una custodia in metallo, un ufficiale Raspberry Pi M.2 HAT+ and active cooler. It is compatible with the latest Raspberry Pi 5 4GB/8GB board and it supports M.2 NVMe SSD 2230 2242.
【Access to most porte】GeeekPi Raspberry Pi 5 Metal Case can accurately access most ports of Raspberry Pi 5 board, including usb-c power jack, micro HDMI porte, porte USB, jack Ethernet, sd card slot, power button, and GPIO port.
【Raspberry Pi 5 Active Cooler】Raspberry Pi 5 Active Cooler combina un heatsink in alluminio con un ventilatore PWM per mantenere il tuo Raspberry Pi 5 mantiene le temperature ottimali, prestazioni affidabili per varie applicazioni.
【Raspberry Pi M.2 HAT+】It supporti single-lane PCIe 2.0 interface and M.2 SSD 2230/2242. It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place.
【NOTA】Raspberry Pi 5 board non è incluso.
39,99 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,00 € SU AMAZON
Waveshare
Waveshare NVMe PCIe To M.2 HAT+ Adapter with PoE, Compatible with Raspberry Pi 5, Supports NVMe Drive Protocol 2230/2242 M.2 Solid State Drive and 802.3af/at Network Standard, with Cooling Fan
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € SU AMAZON
GeeekPi
GeeekPi N20 Dual 2242 NVMe Hat per Raspberry Pi 5
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
GeeekPi N20 Dual 2242 NVMe Hat per Raspberry Pi 5
29,99 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter with PoE Function HAT+ (B), Compatible with Raspberry Pi 5, Supports POE NVMe Drive Protocol 2230/2242 / 2260/2280 M.2 Solid State Drive, High-Speed Reading/Writing
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power), be able to power extra devices while providing stable power to Raspberry Pi
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
35,99 € SU AMAZON
GeeekPi
GeeekPi P31 M.2 NVME M-Key PoE+ HAT con dispositivo di raffreddamento attivo ufficiale per Raspberry Pi 5, supporto M.2 NVMe SSD 2230 2242
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Compatibilità: Compatibile con Raspberry Pi 5
Raffreddamento attivo: Include il dispositivo di raffreddamento attivo ufficiale Raspberry Pi 5
Connessione Ethernet: Dotato di tecnologia di connessione Ethernet
Porta USB: Include 2 porte USB per la connessione di dispositivi esterni
Standard wireless: Supporta lo standard wireless infrared
39,99 € SU AMAZON
raspberry hat nvme
raspberry pi nvme hat
nvme raspberry
raspberry nvme
raspberry pi 5 nvme hat
raspberry pi 4 nvme hat
hat raspberry
raspberry hat
raspberry 5 nvme
raspberry ups hat
#1 VINCITORE
