main logo

Raspberry Gps Hat

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 19 aprile 2025
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 77,99 € SU AMAZON
Geekworm
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • 【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
  • 【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
  • 【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
  • 【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
  • 【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
  • 【Note】DON'T supports software safe shutdown.
  • 【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
  • 28,89 € SU AMAZON
Waveshare
Waveshare
Waveshare RS485 CAN HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Allows Stable Long Distance Communication
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • CAN function, onboard CAN controller MCP2515 via SPI interface, with transceiver SN65HVD230
  • RS485 function, controlled via UART, half-duplex communication, with transceiver SP3485
  • Reserved control pins, allows to work with other control boards
  • Comes with development resources and manual (examples in wiringPi/python)
  • 19,99 € SU AMAZON
Waveshare
Waveshare
Waveshare GSM/GPRS/GNSS Hat Expansion Board, with Low Power Consumption, Based on SIM868, Compatible with Raspberry Pi
Spedizione gratuita
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Standard Raspberry Pi 40PIN GPIO Extension Header, Supporti Raspberry Pi series Boards, Jetson Nano; Supporto SIM applicazione toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 39,99 € SU AMAZON
Waveshare
Waveshare
Waveshare SIM868 GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi, for Easily Realizing Functions Like Making Calls, Sending Text Messages, Wireless Internet Access, etc
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc; Supports GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Onboard USB TO UART converter for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder; Comes with development resources and manual (examples for Raspberry Pi/STM32)
  • 39,99 € SU AMAZON
Waveshare
Waveshare
Waveshare SX1262/SX1268 LoRa HAT For Raspberry Pi, UART Interface, Comes with a 433MHz Antenna, Suitable for Industrial manufacturing, Smart home, Smart Farm, Hotel Scheme
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Utilizzando la tecnologia di modulazione dello spettro di diffusione LoRa di nuova generazione, la distanza di comunicazione del modulo è lunga fino a 5 km, supporta anche la ripetizione automatica per trasmettere più a lungo. Altre caratteristiche includono Wake on Radio, configurazione wireless, rilevamento vettore, chiave di comunicazione e così via.
  • Rispetto ai normali moduli LoRa, SX1268 LoRa HAT raggiunge una distanza di comunicazione più lunga, un tasso più elevato, un consumo più basso, una maggiore sicurezza e anti-interferenza. È adatto per varie applicazioni come controllo industriale, smart home, raccolta dati, ecc.
  • Standard Raspberry Pi 40PIN intestazione di estensione GPIO, supporta schede della serie Raspberry Pi. Convertitore USB a UART CP2102 integrato, per debug seriale. Porta l'interfaccia di controllo UART, per il collegamento di schede host come Arduino/STM32. 4 indicatori LED, facile da controllare lo stato del modulo. Tecnologia di modulazione dello spettro di diffusione LoRa, fino a 84 canali di segnale disponibili, distanza di comunicazione più lunga, più robusta alle interferenze.
  • Ripetizione automatica a più livelli, adatta per comunicazioni ultra a lungo raggio, permette la multi rete nella stessa regione. Funzioni a basso consumo energetico come sonno profondo e Wake on Radio, ideali per applicazioni alimentate a batteria. Chiave di comunicazione personalizzabile che non verrà recuperata, migliora notevolmente la sicurezza dei dati utente.
  • Supporta LBT, monitorando il rumore del canale del segnale prima della trasmissione, migliora notevolmente il rapporto di successo in ambienti estremi. Supporta l'indicazione dell'intensità del segnale RSSI, per valutare la qualità del segnale, accordare la rete. Supporta la configurazione dei parametri wireless, inviando il pacchetto di comandi/dati wireless, configurare o recuperare in remoto il parametro del modulo. Supporta trasmissione a punto fisso, trasmissione, monitor canale di segnale.
  • 33,99 € SU AMAZON
Waveshare
Waveshare
RS485 CAN HAT per Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Consenti Comunicazione Lunga Distanza Tramite RS485/CAN Funzione, Integrato MCP2515 CAN Controller con Chip SN65HVD230 e SP3485
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
  • CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
  • RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
  • Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
  • 19,52 € SU AMAZON
IBest
IBest
IBest 4G / 3G / 2G / GSM/GPRS/GNSS HAT for Raspberry Pi, Jetson Nano,Based on SIM7600G-H, Support LTE CAT4, 4G Connection, Global Positioning
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.Onboard USB to UART converter, for serial debugging
  • Breakout UART control pins, to connect with host boards like Arduino/STM32.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Packing List: .SIM7600G-H 4G HAT x1;LTE Antenna x1 ;GPS External Antenna (B) x1;USB type A plug to micro plug cable x2;RPi screws pack (2pcs) x1
  • 83,65 € SU AMAZON
Waveshare
Waveshare
Waveshare GNSS L1+L5 Dual-Frequency Active Antenna, SMA-J Connector, Support BD/GPS/Galileo/QZSS/IRNSS, for Raspberry Pi Board and GPS HAT
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • GNSS L1+L5 dual frequency active positioning antenna, SMA-J interface, supporting multiple satellite positioning systems
  • 2dBi gain, 3m long, magnetic base, supporting multiple satellite positioning systems such as BD/GPS/Galileo/QZSS/IRNSS
  • Suitable for smart homes, smart agriculture, and high-precision maps
  • 28,99 € SU AMAZON
Waveshare
Waveshare
Waveshare LC29H Series Dual-Band GPS Module for Raspberry Pi, Dual-Band L1+L5 Positioning Technology, Supports RTK Rover to Realize High-Precision Centimeter-Level Positioning
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Supports fast convergence dual-band RTK centimeter-level positioning, suitable for high-precision positioning of terminal devices
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
  • Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
  • Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
  • A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with cold start when powered on to 5 seconds Support QGNSS software, easy to set various module functions
  • 81,99 € SU AMAZON
hat raspberry raspberry hat gps raspberry raspberry gps hat raspberry pi raspberry pi hat raspberry hdmi hat raspberry hifi hat raspberry ups hat dac hat raspberry