Raspberry Can Bus
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
2 febbraio 2025
Waveshare
Waveshare 2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi 5/4/3/Zero Dual Chips Solution Stackable Design For Expanding Multiple CAN Channels Supports Wide Range Voltage Input of 7~36V
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Standard Pi 40PIN GPIO extension header, compatible with Raspberry Pi/Jetson Nano series boards. Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
Onboard unibody power supply isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal. Onboard digital isolator, signal isolation makes the communication more safe and stable, and better anti-interference
Onboard external power supply terminal, supports 7~36V wide voltage power input, supports powering the Pi and the HAT at the same time. Onboard SM24CANB TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
Onboard voltage translator, select 3.3V/5V operating voltage by jumper. Onboard 120Ω terminal resistor, configured by jumper
Breakout SPI and I2C control pins, for connecting with other host control boards. Can provide with online development resources and manual (examples in Python/C)
36,99 € SU AMAZON
IBest
IBest 2-CH Can Hat 2-Channel Isolated Can Bus Expansion Hat Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W,MCP2515 + SN65HVD230 Dual Chips Solution with Multi Onboard Protection Circuits
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
Integrated power isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal
Onboard digital isolator, signal isolation makes the communication more safe, more stable, and better anti-interference.Onboard TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
Onboard voltage translator, select 3.3V/5V operating voltage by jumper.Onboard 120Ω terminal resistor, configured by jumper
Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
30,29 € SU AMAZON
Waveshare
RS485 CAN HAT per Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Consenti Comunicazione Lunga Distanza Tramite RS485/CAN Funzione, Integrato MCP2515 CAN Controller con Chip SN65HVD230 e SP3485
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
19,52 € SU AMAZON
xicoolee
XICOOLEE Dual-CH, Can Bus Expansion HAT per Raspberry Pi, con 2 canali CAN Interfaccia comunicazione, doppio chip MCP2515 e ATA6561
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Il modulo adotta i chip doppi di CAN controller MCP2515 e CAN ricetrasmettitore ATA6561-GAQW-N. Supporta la comunicazione dell'interfaccia CAN a doppio canale ed è necessario un solo modulo per eseguire il test del ricetrasmettitore CAN su RPI
SM24CANB a bordo (soppressore di tensione transitoria), tensione di picco antistatica e transitoria
Circuito di conversione a livello di bordo, il livello di lavoro di 3.3V/5V può essere commutato tramite interruttore a scorrimento
Resistenza terminale a bordo 120Ω, può essere impostata Abilita dal commutatore di scorrimento
Porta fuori l'interfaccia di controllo SPI, per il collegamento con schede di controllo host come STM32/Ardui.Notice: Il per Raspberry Pi in foto NON è incluso.
23,99 € SU AMAZON
Elektor International Media BV
The CAN Bus Companion: projects with Arduino Uno & Raspberry Pi
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
Waveshare
Waveshare 2-Ch CAN FD HAT per Raspberry Pi, 2 Canali Isolato CAN Bus FD Espansione HAT Integrato MCP2518FD e MCP2562FD, Supporta Originali CAN2.0 e CAN FD Protocolli, Circuiti Multiprotezione
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【2-CH CAN FD HAT for Raspberry Pi】With standard Raspberry Pi 40PIN GPIO header customized for Raspberry Pi series boards/Jetson Nano, and breakout SPI control pins for connecting with host control boards like Arduino/STM32
【Multi Onboard Protection Circuits】Including 500W lightningsurge, ESD protection, short circuit protection, and electrical isolation, it make the communication more safe and more reliable
【2-Channel CAN Support】MCP2518FD CAN Controller + MCP2562FD CAN Transceiver, supports CAN with Flexible Data-Rate, high anti-interference capability, stable operation
【Electrical Isolation Circuitry Safe & Stable】SM24CANB TVS Diode, ESD Protection, Transient Peak Voltage Protection, enable isolated and stable CAN FD capability for your Raspberry Pi
【Flexible And Handy Jumpers】Easily select 3.3V / 5V operating voltage, or enable/disable 120Ω terminal resistor, via onboard jumpers
60,99 € SU AMAZON
DollaTek
DollaTek Modulo Bus Can MCP2515 TJA1050 Modulo SPI Ricevitore per Arduino Raspberry Pi 51 Arm AVR DIY ECC
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Supporta la specifica CAN V2.0B, la velocità di comunicazione 1Mb / S
Campo dati da 0 a 8 byte
La cornice standard e espandere il telaio e il telaio remoto
Modulo di alimentazione da 5 V CC, controllo del protocollo di interfaccia SPI
Resistenze di terminazione da 120 ohm. Corrispondenza di impedenza, garantisce la capacità di guida, la trasmissione di dati a lunga distanza contro le radiazioni del segnale
9,99 € SU AMAZON
Waveshare
USB a CAN Adattatore Analizzatore CAN Bus Convertitore Basato su Chip STM32, Supporta Windows 11/10/8/7/XP e Raspberry Pi OS/Jetson Nano Ubuntu ecc. Sistemi Linux, con Cavo USB
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
USB to CAN Bus adapter analyzer collects data from CAN bus to PC via USB for transceiver control, data analysis, acquisition and monitoring of CAN bus network, supports CAN2.0A (standard frame) and CAN2.0B (extended frame), CAN baud rate is configurable in the range of 5Kbps-1Mbps
USB to CAN converter model support Windows XP/7/8/10/11 and Linux systems such as Raspberry Pi OS and Ubuntu under Jetson Nano, easy secondary development, just need to modify the sending and receiving commands, adopts the original STM32F103 chip, stable and reliable communication
Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode
Supports multiple CAN data sending modes: single frame, multiple frames, manually, regularly and cyclic sending, Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID, or specify ID to automatically answer the configured data. Data can be saved as TXT or Excel
Supports CAN bus detection for status checking, Sending/receiving CAN data with time scale, allows sequentially displaying, Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default)
28,99 € SU AMAZON
innomaker
USB to CAN Converter Cable for Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Jetson Nano/Tinker Board and Any Single Board Computer Support Windows Linux and Mac OS
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
The USB to CAN Converter Cable compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop.
The USB CAN Cable support Windows System, Mac OS and Linux, Raspbian(v5.4 kernel), Ubuntu.
Plug and Play USB CAN device. No external power required. Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. Support for CAN bus 2.0A and 2.0B specification.
Provides 3000V voltage isolation and 2500V ESD isolated protection on signal pins.120 Ohm resistor selectable jumper feature.
Provide C/Python and source code with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSBKit for Mac Os(Big Sur).
46,00 € SU AMAZON
Elektor International Media BV
Das CAN-Bus Praxisbuch: Projekte mit Arduino Uno und Raspberry Pi
Spedizione gratuita
64
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
can bus raspberry
bus can
can bus
raspberry can
can bus module
can bus moto
can bus fiat
cablaggio can bus
can bus adapter
can bus tester
#1 VINCITORE
