main logo

Can Bus Raspberry

I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento: 2 febbraio 2025
Waveshare
Waveshare
RS485 CAN HAT per Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, Consenti Comunicazione Lunga Distanza Tramite RS485/CAN Funzione, Integrato MCP2515 CAN Controller con Chip SN65HVD230 e SP3485
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header
  • CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
  • RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic
  • Reserved control pins, allows to work with other control boards, comes with development resources and manual (examples in wiringPi/python)
  • 19,52 € SU AMAZON
Waveshare
Waveshare
Waveshare 2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi 5/4/3/Zero Dual Chips Solution Stackable Design For Expanding Multiple CAN Channels Supports Wide Range Voltage Input of 7~36V
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • Standard Pi 40PIN GPIO extension header, compatible with Raspberry Pi/Jetson Nano series boards. Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
  • Onboard unibody power supply isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal. Onboard digital isolator, signal isolation makes the communication more safe and stable, and better anti-interference
  • Onboard external power supply terminal, supports 7~36V wide voltage power input, supports powering the Pi and the HAT at the same time. Onboard SM24CANB TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
  • Onboard voltage translator, select 3.3V/5V operating voltage by jumper. Onboard 120Ω terminal resistor, configured by jumper
  • Breakout SPI and I2C control pins, for connecting with other host control boards. Can provide with online development resources and manual (examples in Python/C)
  • 36,99 € SU AMAZON
Elektor International Media BV
Elektor International Media BV
The CAN Bus Companion: projects with Arduino Uno & Raspberry Pi
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3
DollaTek
DollaTek
DollaTek Modulo Bus Can MCP2515 TJA1050 Modulo SPI Ricevitore per Arduino Raspberry Pi 51 Arm AVR DIY ECC
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • Supporta la specifica CAN V2.0B, la velocità di comunicazione 1Mb / S
  • Campo dati da 0 a 8 byte
  • La cornice standard e espandere il telaio e il telaio remoto
  • Modulo di alimentazione da 5 V CC, controllo del protocollo di interfaccia SPI
  • Resistenze di terminazione da 120 ohm. Corrispondenza di impedenza, garantisce la capacità di guida, la trasmissione di dati a lunga distanza contro le radiazioni del segnale
  • 9,99 € SU AMAZON
xicoolee
xicoolee
XICOOLEE Dual-CH, Can Bus Expansion HAT per Raspberry Pi, con 2 canali CAN Interfaccia comunicazione, doppio chip MCP2515 e ATA6561
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Il modulo adotta i chip doppi di CAN controller MCP2515 e CAN ricetrasmettitore ATA6561-GAQW-N. Supporta la comunicazione dell'interfaccia CAN a doppio canale ed è necessario un solo modulo per eseguire il test del ricetrasmettitore CAN su RPI
  • SM24CANB a bordo (soppressore di tensione transitoria), tensione di picco antistatica e transitoria
  • Circuito di conversione a livello di bordo, il livello di lavoro di 3.3V/5V può essere commutato tramite interruttore a scorrimento
  • Resistenza terminale a bordo 120Ω, può essere impostata Abilita dal commutatore di scorrimento
  • Porta fuori l'interfaccia di controllo SPI, per il collegamento con schede di controllo host come STM32/Ardui.Notice: Il per Raspberry Pi in foto NON è incluso.
  • 23,99 € SU AMAZON
Waveshare
Waveshare
USB a CAN Adattatore Analizzatore CAN Bus Convertitore Basato su Chip STM32, Supporta Windows 11/10/8/7/XP e Raspberry Pi OS/Jetson Nano Ubuntu ecc. Sistemi Linux, con Cavo USB
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • USB to CAN Bus adapter analyzer collects data from CAN bus to PC via USB for transceiver control, data analysis, acquisition and monitoring of CAN bus network, supports CAN2.0A (standard frame) and CAN2.0B (extended frame), CAN baud rate is configurable in the range of 5Kbps-1Mbps
  • USB to CAN converter model support Windows XP/7/8/10/11 and Linux systems such as Raspberry Pi OS and Ubuntu under Jetson Nano, easy secondary development, just need to modify the sending and receiving commands, adopts the original STM32F103 chip, stable and reliable communication
  • Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode
  • Supports multiple CAN data sending modes: single frame, multiple frames, manually, regularly and cyclic sending, Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID, or specify ID to automatically answer the configured data. Data can be saved as TXT or Excel
  • Supports CAN bus detection for status checking, Sending/receiving CAN data with time scale, allows sequentially displaying, Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default)
  • 28,99 € SU AMAZON
innomaker
innomaker
USB to CAN Converter Cable for Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Jetson Nano/Tinker Board and Any Single Board Computer Support Windows Linux and Mac OS
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • The USB to CAN Converter Cable compatible with all series Raspberry Pi/Jetson Nano/Tinker Board/any single board computer, desktop and laptop.
  • The USB CAN Cable support Windows System, Mac OS and Linux, Raspbian(v5.4 kernel), Ubuntu.
  • Plug and Play USB CAN device. No external power required. Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily. Support for CAN bus 2.0A and 2.0B specification.
  • Provides 3000V voltage isolation and 2500V ESD isolated protection on signal pins.120 Ohm resistor selectable jumper feature.
  • Provide C/Python and source code with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSBKit for Mac Os(Big Sur).
  • 46,00 € SU AMAZON
Elektor International Media BV
Elektor International Media BV
Das CAN-Bus Praxisbuch: Projekte mit Arduino Uno und Raspberry Pi
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8
Waveshare
Waveshare
Waveshare USB to CAN Adapter Analyzer, Adopts STM32 Chip Scheme, 4 Working Modes, Stable Communication, for Windows XP/7/8/10/11, for Raspberry Pi OS/Jetson Nano Ubuntu and Other Linux System
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • The data of CAN bus can be collected to the PC via USB to realize the receiving and transmitting control, data analysis, collection and monitoring of the CAN Bus Network
  • Support CAN2.0A (standard frame) and CAN2.0B (extended frame). Support CAN communication baud rate range: 5kbps~1Mbps, can customize CAN baud rate. Support multiple CAN data receiving methods: it can be configured to receive only the data with the specified ID, or specify the ID to automatically respond to the configured data
  • Supports 4 Working Modes: normal mode, loopback mode, silent mode, and silent loopback mode. Support multiple CAN data Transmission Modes: single frame transmission, multi frame transmission, manual transmission, timed transmission and cyclic transmission
  • Adopts the Original STM32F103 Chip, more stable and reliable communication. Support to set the communication baud rate of USB virtual COM port (9600~2000000bps), the default is 2000000bps
  • Supports Windows XP/7/8/10/11, Compatible with Raspberry Pi OS/Jetson Nano Ubuntu and other Linux Systems, Supports Secondary Development(Just deal with the receiving and sending commands)
  • 29,99 € SU AMAZON
IBest
IBest
IBest 2-CH Can Hat 2-Channel Isolated Can Bus Expansion Hat Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W,MCP2515 + SN65HVD230 Dual Chips Solution with Multi Onboard Protection Circuits
Spedizione gratuita
star

65

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication
  • Integrated power isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal
  • Onboard digital isolator, signal isolation makes the communication more safe, more stable, and better anti-interference.Onboard TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
  • Onboard voltage translator, select 3.3V/5V operating voltage by jumper.Onboard 120Ω terminal resistor, configured by jumper
  • Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
  • 30,29 € SU AMAZON
raspberry can bus bus can can bus raspberry can can bus module can bus moto can bus fiat cablaggio can bus can bus adapter can bus tester