Raspberry Battery Hat
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
18 marzo 2025
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is not included)
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Alimenta il tuo Pi Zero senza problemi dalla connessione di alimentazione o dalle batterie di riserva
Supporta la ricarica e l'uscita regolata da 5 V allo stesso tempo, monitoraggio I2C
Perni pogo a molla integrati per il collegamento con schede Raspberry Pi serie Zero. Chip di ricarica della batteria Li-Po, con gestione dinamica del percorso, alimentazione più stabile
Chip di aumento della tensione, che fornisce un'uscita di potenza regolata da 5 V. Comunicazione bus I2C, monitoraggio della tensione della batteria, corrente, potenza e capacità residua in tempo reale
Multi circuiti di protezione della batteria: protezione da sovraccarico/scarica, protezione da sovracorrente e protezione da cortocircuito, più sicuro e stabile. Indicatore di ricarica per monitorare lo stato di funzionamento della batteria. Viene fornito con risorse di sviluppo e manuale
28,99 € SU AMAZON
Waveshare
Waveshare UPS HAT (D) for Raspberry Pi, Supports 21700 Li Battery (NOT Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging & Power Output At the Same Time
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Onboard Li battery charging chip, with dynamic path management, more stable power supply. Onboard MCU management, supports detecting power connection and booting the Pi
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
Onboard LED indicators for monitoring the battery operating status. Supports displaying battery level on the system, easy to check the battery remaining capacity
Onboard boost converter chip for stable 5V power output. Provide with online development resources and manual(Obtain from 24hour customer service)
35,99 € SU AMAZON
Waveshare
Waveshare UPS HAT (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € SU AMAZON
Waveshare
Waveshare Raspberry Pi Uninterruptible Power Supply UPS HAT Stable 5V Power Output Multi Battery Protection Circuits
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
33,95 € SU AMAZON
IBest
ups Hat (B) for Raspberry Pi Uninterruptible Power Supply with I2C Bus Communication,5V Power Output, up to 5A Current,Multi Battery Protection Circuits
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
This UPS HAT is Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi.5V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly.Comes with development resources and manual
34,95 € SU AMAZON
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
46,99 € SU AMAZON
Waveshare
Waveshare Li-ION Battery Hat for Raspberry Pi 5V Regulated Output Bi-Directional Quick Charge
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
The Li-ion Battery HAT integrates SW6106 power bank management chip, consente di fornire 5 V regolate power supply to your Pi from a battery, make the Pi becomes a portable device.
It will charge the battery as well, support bi-directional quick charge. This module can be used as a universal mini power bank, also works with other 5V devices.
Onboard SW6106 chip, supporti bidirezionali quick charge supports multi quick charge protocols like PD/QC/FCP/PE/SFCP
Protezione della batteria circuitry, fornisce protezione inversa, over charge/discharge protection, over current protection and short circuit protection
Indicatori Onboard: ricarica rapida, warning, and power capacity
25,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
Raspberry Pi
Raspberry Pi Build HAT
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Si adatta a qualsiasi computer Raspberry Pi con un'intestazione GPIO a 40 pin
Il microcontrollore Raspberry Pi RP2040 integrato gestisce il controllo a basso livello dei dispositivi LEGO Technic
Controlla fino a quattro motori e sensori LEGO Technic
Connettore di alimentazione CC: Jack a canna da 2,1 mm, positivo al centro
Richiede una fonte di alimentazione esterna da 8 V ± 10% DC, come l'alimentatore Raspberry Pi Build HAT o una batteria da 7,5 V
21,45 € SU AMAZON
Fasizi
Fasizi Batteria al litio scheda di espansione con interruttore per Raspberry Pi 3 Modello B, 2 Modello B e 1 Modello B+ Banana Pi 3800mAh 5V/1.8A
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Un modulo di alimentazione appositamente progettato per Raspberry Pi, che consente di utilizzare Raspberry Pi in modo mobile.
Capacità della batteria: 3800 mAh (massima); corrente di uscita: 1,8 A.
Tensione di uscita (senza carico): 5,1 V ± 0,1 V.
Doppie uscite USB, una per Raspberry Pi, l'altra per lo schermo LCD incorporato.
Fornito con distanziatori di fissaggio, viti e dado, in modo da poter impilare la scheda Raspberry Pi sul modulo.
14,99 € SU AMAZON
raspberry hat battery
hat raspberry
raspberry hat
raspberry battery
dac hat raspberry
raspberry dac hat
raspberry hat ssd
raspberry ssd hat
game hat raspberry
lora hat raspberry
#1 VINCITORE
