main logo

Micro Swiss K1

I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento: 8 febbraio 2025
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 74,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.4mm
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.6mm
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Spedizione gratuita
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
  • This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 26,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.8mm
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hardware Kit for Creality K1 / K1 Max
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • This is a spare hardware kit for FlowTech hotend
  • 7,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ - HighFlow 1.75 Nozzle - 0.4mm  
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 26,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ - MK8 Nozzle - 0.6mm            
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 26,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro-Swiss M2714 Bowden Dual Gear Extruder Compatibile con Creality Ender, CR10, CR-10 PRO, CR-10S, CR6-SE, Tornado
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Si adatta: macchine per estrusore Bowden, adatto per motori passo a passo di dimensioni NEMA 17
  • Prodotto negli Stati Uniti da Micro Swiss
  • 55,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss - Kit hotend interamente in metallo, per Creality CR-10s Pro/CR-10 Max, 0,4 mm
Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Kit di conversione hotend interamente in metallo per stampanti CR-10s Pro, pronto all’uso. L’installazione non richiede assolutamente alcuna modifica alla stampante.
  • Il nostro blocco di raffreddamento dal design unico elimina la necessità di un tubo termico. Non avendo un tubo termico separato all’interno del blocco di raffreddamento, consente una dissipazione del calore più veloce.
  • L’heatbreak termico è realizzato in lega di titanio grado 5 per fornire un eccellente isolamento termico tra il riscaldatore e il blocco di raffreddamento. Il titanio è un materiale estremamente resistente e offre una conducibilità termica quasi 3 volte più bassa rispetto all’acciaio inossidabile, creando una zona di fusione più definita.
  • Compatibilità: CR-10s Pro, CR-10s Pro V2, CR-10 Max.
  • 89,99 € SU AMAZON
k1 micro swiss micro swiss micro swiss creality k1 hotend hotend micro swiss micro swiss flowtech micro swiss hotend micro swiss m3213 micro swiss nozzle swiss tech micro micro swiss extruder