main logo

Micro Swiss

I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento: 29 novembre 2024
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 74,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro-Swiss All Metal Hotend Kit per Creality CR-10 / CR10S / CR20 / Ender 2, 3, 5 stampanti
12% Sconto Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • This is a drop in all metal conversion kit for the CR10 printers. Richiede assolutamente nessuna modifica alla stampante per l'installazione.
  • Il nostro esclusivo blocco di raffreddamento elimina la necessità di un tubo termico. Non avendo un tubo termico separato all'interno del blocco di raffreddamento, consente una rapida dissipazione del calore.
  • La rottura termica è realizzata in lega di titanio di grado 5 per fornire un eccellente isolamento termico tra il riscaldamento e il blocco di raffreddamento.
  • Il titanio è un materiale estremamente resistente e offre quasi 3 volte più bassa conduttività termica dell'acciaio inox, creando una zona di fusione più definita.
  • CNC Machined and Assembled in USA
  • 63,35 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss NG™ - Estrusore adatto per le stampanti Creality CR-10 / Ender 3
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Questo estrusore supera le prestazioni di tutte le controparti correnti sul mercato, per creare un'esperienza di stampa ottimale accessibile a tutti.
  • Con il design Bevel Gear, è compatibile con le dimensioni del filamento corto dell'industria (non oltre i 41 mm).
  • Il posizionamento particolare del motore consente di avere un design compatto e con poca sporgenza. Questo sistema aumenta la rigidità.
  • Adatto per un'ampia gamma di stampanti 3D.
  • Made in USA by Micro Swiss.
  • 130,38 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Direct Drive Estrusore per stampanti Creality CR-10 / Ender 3
Spedizione gratuita
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Nessuna modifica richiesta, semplice plug and play.
  • Senza staffe o panini stampati.
  • Caratteristiche: Treno a doppio azionamento Acciaio temprato per utensili, ingranaggi di precisione CNC Impugnatura regolabile Facile caricamento del filamento Percorso di filamento corto e altamente vincolato Stampa filamenti flessibili ad alta velocità e precisione Eccezionale controllo dell'estrusione Corpo in alluminio leggero
  • 89,98 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Spedizione gratuita
star

84

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
  • This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 26,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.4 mm
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating; twinClad XT is a nickel composite coating designed for very low friction
  • Orizzontale 0.4 mm
  • Offre uno dei più bassi coefficienti di attrito, meglio che il nickel con PTFE co-deposito
  • Questo rivestimento è anche molto resistente e resistente all'abrasione; se si lavora con fibra di carbonio abrasiva, acciaio inossidabile, legno pieno o qualsiasi altro filamento metallico, questo migliorerà notevolmente la vita del tuo ugello
  • 21,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 74,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.4mm
Spedizione gratuita
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ - MK8 Nozzle - 0.4mm            
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 25,85 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1C    
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 74,99 € SU AMAZON
micro swiss creality k1 micro swiss micro swiss k1 micro swiss extruder micro swiss m3213 swiss tech micro hotend micro swiss micro swiss flowtech micro swiss hotend micro swiss cm2