Waveshare Hat
I 10 migliori prodotti di ottobre 2024
Ultimo aggiornamento:
7 ottobre 2024
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 € SU AMAZON
Waveshare
Waveshare Poe Hat (F) for Raspberry Pi 5, 802.3af/at-Compliant, Power Over Ethernet Hat Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant.x
Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
29,90 € SU AMAZON
Waveshare
Waveshare USB HUB HAT (B) for Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
✅Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
✅4x extended USB ports, compatible with USB 2.0 / 1.1
✅Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
✅USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
16,15 € SU AMAZON
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller Partial refresh for Raspberry Pi/Jetson Nano/Arduino,Support SPI Interface
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € SU AMAZON
Waveshare
Waveshare WM8960 Audio Hi-Fi Sound Card Hat for Raspberry Pi Stereo CODEC Play Record I2S Interface
Spedizione gratuita
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+. Can be used for the latest bookworm 64 bit system (i.e. the latest driver requires a 64 bit system).
Integrates WM8960 low power stereo CODEC, communicates via I2S interface
Integrates dual high-quality MEMS silicon Mic, supports left & right double channels recording, nice sound quality
Onboard standard 3.5mm earphone jack, play music via external earphone Onboard dual-channel speaker interface, directly drives speakers
Supports sound effects such as stereo, 3D surrounding, etc.
25,99 € SU AMAZON
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Si tratta di un V4 (l'ultima versione) E-Ink display HAT per Raspberry Pi, 2.15 pollici, risoluzione 250x122, con controller incorporato, che comunica tramite interfaccia SPI, supporta l'aggiornamento parziale.
A causa dei vantaggi come il consumo energetico ultra basso (fondamentalmente l'alimentazione è necessaria solo per rinfrescare), ampio angolo di visione, display chiaro senza elettricità, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali e così via.
Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede Raspberry Pi/Jetson Nano serie. Nota: non compatibile con Netatmo!
Interfaccia SPI, per il collegamento con altre schede controller come Nucleo, ecc.
Traduttore di tensione integrato, compatibile con MCU 3.3V/5V. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32). Si prega di contattare il nostro servizio clienti 24 ore su 24 per risorse e manuali pertinenti
20,99 € SU AMAZON
Waveshare
Waveshare PN532 NFC HAT per Raspberry Pi, PN532 Near Field Communication Reader Modulo con I2C/SPI/UART Tre Interfacce di Comunicazione, 13.56 MHz Frequenza Operativa, Supporta varie Schede NFC/RFID
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Power over Ethernet HAT per Raspberry Pi 3 modello B+, 802.3af Power Sourcing Equipment
Il Raspberry Pi Power over Ethernet HAT è un piccolo accessorio per il computer Raspberry Pi Può essere utilizzato solo con Raspberry Pi 3 modello B+ (March 2018).
Il PoE ha la possibilità di alimentare il vostro Raspberry Pi utilizzando le reti di alimentazione collegate alla rete Ethernet per questo prodotto per essere utilizzato, la rete è collegata alle necessità di installare attrezzature di alimentazione.
Alimentazione completamente isolata.
802.3af PoE, 37 – 57 V DC, classe 2, 5 V/2,5 A uscita DC, 25 mm x 25 mm, ventola brushless per ventola di raffreddamento del processor Cooling, controllo del vento.
29,99 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € SU AMAZON
Waveshare
Waveshare Raspberry Pi Uninterruptible Power Supply UPS HAT Stable 5V Power Output Multi Battery Protection Circuits
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
33,95 € SU AMAZON
Waveshare
Waveshare 7.5inch E-Paper Display HAT (B) Module 800x480 Resolution 3.3v E-Ink Electronic Screen SPI Interface Red Black White Three-Color for Raspberry Pi Jetson Nano
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
No backlight, keeps displaying last content for a long time even when power down.
Ultra low power consumption, basically power is only required for refreshing. Wide Viewing Angle, Paper-Like Displaying Without Electricity.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.
72,99 € SU AMAZON
waveshare game hat
waveshare ups hat
hat