main logo

Waveshare Gsm

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 23 aprile 2025
Waveshare
Waveshare
Waveshare GSM/GPRS/GNSS Hat Expansion Board, with Low Power Consumption, Based on SIM868, Compatible with Raspberry Pi
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Standard Raspberry Pi 40PIN GPIO Extension Header, Supporti Raspberry Pi series Boards, Jetson Nano; Supporto SIM applicazione toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 39,99 € SU AMAZON
Waveshare
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
  • Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
  • Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
  • 30,99 € SU AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H-M.2 SIMCom Originale 4G LTE Cat-4 Modulo Copertura Globale con Supporto GNSS M.2 B CHIAVE Connettore LTE-TDD LTE-FDD HSPA+ GSM GPRS EDGE
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Interfaccia M.2 con forte compatibilità. Supporto ricevitore GNSS multi-costellazione. Adatto per reti LTE, UMTS e GSM con copertura globale. Funzioni software abbondanti: FOTA, LBS, TLS. I comandi AT della serie SIM7600-H-M2 sono compatibili con i moduli della serie SIM7500/SIM7600.
  • La serie SIM7600G-H-M.2 è il modulo LTE Cat 4 che supporta le modalità di comunicazione wireless di LTE-TDD/LTE-FDD/HSPA+/GSM/GPRS/EDGE ecc. Supporta velocità massima di downlink di 150Mbps e velocità di uplink di 50Mbps.
  • La serie SIM7600G-H-M.2 adotta il fattore di forma M.2 ed è costituita da un modulo serie SIM7600-H e una scheda adattatore M.2. È facile per i clienti integrare.
  • La serie SIM7600G-H-M.2 integra più sistemi satellitari ad alta precisione di posizionamento GNSS, con più protocolli di rete incorporati, supporta i driver per i sistemi operativi principali (driver USB per Windows, Linux e Android ecc.) e la funzione del software, i comandi AT sono compatibili con i moduli della serie SIM7500/SIM7600.
  • Nel frattempo la serie SIM7600G-H-M.2 integra le principali interfacce standard industriali, con una potente espandibilità, tra cui abbondanti interfacce come UART, USB, GPIO, che è adatto per le principali applicazioni IoT come telematica, dispositivi di sorveglianza, CPE, router industriali e diagnostica remota ecc.
  • 58,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 77,99 € SU AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H-PCIE SIMCom Original 4G LTE Cat-4 Module Support Global Coverage GNSS/LTE-TDD/LTE-FDD/HSPA+/GSM/GPRS/Edge with Mini-PCIe Connector
Spedizione gratuita
star

84

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Mini-PCIE interface with strong compatibility
  • Multi-constellation GNSS receiver support
  • Suitable for LTE, UMTS and GSM networks with global coverage
  • Abundant software functions: FOTA, LBS, TLS, VoLTE
  • AT commands of the SIM7600-H-PCIE series are compatible with the SIM7500/SIM7600 series modules
  • 64,99 € SU AMAZON
Waveshare
Waveshare
Waveshare SIM868 GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi, for Easily Realizing Functions Like Making Calls, Sending Text Messages, Wireless Internet Access, etc
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc; Supports GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Onboard USB TO UART converter for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder; Comes with development resources and manual (examples for Raspberry Pi/STM32)
  • 39,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi gsm/GPRS/Bluetooth Hat Based SIM800C Support SMS, GPRS, DTMF, HTTP, FTP, MMS, email for Band gsm 850/EGSM 900/DCS Compatible all Version of Pi/Jetson Nano
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nanos; Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc
  • Bluetooth 3.0, supports data transferring through Bluetooth;UART interface, for connecting host control boards like Arduino/STM32;Baudrate auto detection (1200bps ~115200bps)
  • Onboard voltage level translator, 3.3V by default, switch to 5V via jumper;2x LEDs for indicating the module working status;SIM card slot for 1.8V/3V SIM card
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),wiki link: www.waveshare.com/wiki/SIM800C_GSM/GPRS_HAT
  • 20,74 € SU AMAZON
Waveshare
Waveshare
Waveshare Cat-1/GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi, Based On A7670E Module, LTE Cat-1 / 2G Support, GNSS Positioning
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. Supports dial-up, telephone call, SMS.
  • Supports LBS base station positioning, it is able to get the approximate position info via mobile network. Supports GPS, BeiDou, GLONASS positioning. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words.
  • Onboard USB interface, for testing AT Commands, network communication, and so on. Onboard audio jack for sound recording, making telephone calls, listening the TTS resulting speech, etc.
  • Breakout common used control pins of the A7670E module, make it easy to connect with hosts boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. 2x LED indicators, easy to monitor the operating status. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
  • It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, satellite positioning, and so on.
  • 42,99 € SU AMAZON
Waveshare
Waveshare
Waveshare SIM7028 NB-IoT HAT for Raspberry Pi/Jetson Nano, Supports Global Band NB-IoT Communication, Small in Size and Low Power Consumption, Onboard 40PIN GPIO Header, with GSM Antenna
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • With standard Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards/Jetson Nano, etc. Supports TCP/UDP/LWM2M/COAP/DTLS/DNS/NTP/PING/HTTP(S)/MQTT(S)/TLS/SSL, etc.
  • Onboard Type-C interface for software debugging. Onboard UART control pins, for connecting with host boards like STM32,etc. 1x LED indicators, easy to monitor the working status
  • Onboard USB to UART chip, the UART communication pin can be configured via jumper. Onboard nano SIM card slot, compatible with NB-IoT specific card
  • Baudrate: 2400bps ~ 460900bps (115200bps by default). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands). Supports SIM application toolkit: SAT Class 3, GSM 11.11, USAT
  • Provide with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/ESP32), please request it from our online customer service
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 8-Ch Ethernet Relay Module (B) With Digital Input, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, With Various Isolation And Protection Circuits, Industrial Grade Rail-Mount Case
Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • An industrial 8-ch relay module controlled via Ethernet port, with 8-ch digital input, adopts Modbus RTU/Modbus TCP protocols, supports PoE power supply, also comes with an ABS rail-mount case. The Modbus POE ETH Relay (B) is very easy to use. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirements.
  • Features flash-on, flash-off function, by passing argument to the command, it is possible to turn on the relay for a while and then close it automatically. Supports passive and active digital input, with bi-directional optocoupler isolation, built in debouncing algorithm. The relay supports digital input linkage control or toggle control
  • Supports DC 7~36V wide range power input and PoE power supply. Supports relay control through MQTT protocol, comes with Alibaba Cloud MQTT application demo. 4 LEDs and Network indicators for indicating the MCU status and signal transceiving status
  • Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit. Adopts dedicated relay driver chip, with built-in flyback diode protection, for stronger and more stable driving ability
  • Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection. High quality relay, contact rating: ≤10A 250VAC/30VDC. Rail-mounted ABS plastic enclosure, easy to install, safe to use. Applicable to Industrial Control, Smart Home, Smart Agriculture, Breeding / Farming
  • 66,99 € SU AMAZON
waveshare