main logo

Stm32 Nano

I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento: 15 marzo 2025
LUCKFOX
LUCKFOX
LUCKFOX 7.3-inch e-Paper HAT (F), 7-Color e-Ink Screen with PCB, 800x480 Pixels, Low Power Consumption - for Raspberry Pi/Jetson Nano/STM32, Suitable for Electronic Shelf Labels, Meeting Badges, etc
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Advanced Color ePaper technology with an ACeP seven-color display and a resolution of 800x480
  • Low power consumption with minimal power usage during refresh and long-lasting display in case of a power outage
  • SPI Control interface compatible with Raspberry Pi/Jetson Nano/STM32, and other control boards
  • Onboard level shifting chip supporting 3.3V and 5V interfaces, adding to its versatility
  • Compatible with usage in applications such as electronic shelf labels, pricing tags, meeting badges, and more
  • 87,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 1.5inch OLED Display Module 128x128 16 Gray Scale SPI/I2C Interface SSD1327 Driver Raspberry Pi/Jetson Nano/STM32 Examples Provided
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.
  • 128x128 high resolution
  • 16 gray scale, better display effect
  • Supports SPI or I2C interface, configured via onboard resistor
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), download link: www.waveshare.com/wiki/1.5inch_OLED_Module
  • 21,15 € SU AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 2.13inch E-Paper with PCB(V4), 250x122Pixel Screen, Support Local Refresh, Low Power Consumption, Wide Viewing Angle, for Raspberry Pi/Jetson Nano/STM32, for Electronic Shelf Label
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • No backlight is required, and the display content of the last screen can be kept for a long time after power failure. Very low power consumption, which is only used when refreshing
  • Based on Pi 40PIN GPIO interface design, compatible with Raspberry Pi series motherboards/Jetson Nano
  • SPI communication interface is reserved to facilitate access to STM32 and other main control boards. On board level conversion chip, compatible with 3.3V and 5V MCU interfaces
  • Applicable to price labels, asset equipment labels, electronic shelf labels, conference nameplates, etc
  • Provide complete supporting information manual (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant examples
  • 20,15 € SU AMAZON
IBest
IBest
5.65inch E-paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • The e-paper with advanced Color ePaper (ACeP) technology, supports 7-Color display
  • Onboard SPI interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Package Content:5.65inch e-Paper Module (F) x1;PH2.0 20cm 8Pin x1
  • 72,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
xicoolee
xicoolee
1.54 Pollici E-Paper Display Tre Colori EPaper Schermo per Raspberry Pi/Arduino/Jetson Nano/STM32 200x200 Pixel Rosso Nero Bianco SPI Interfaccia E-Ink
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Display E-ink da 1,54 pollici per Raspberry Pi, 200 * 200 pixel, può visualizzare tre colori: rosso, nero e bianco
  • Schermo eink da 1,54 pollici, interfaccia SPI, utilizzo minimo del pin
  • Modulo e-paper da 1,54 pollici, traduttore di tensione integrato, compatibile con interfacce microcontrollore da 3,3 V e 5 V
  • Display a colori E, programmi di esempio open source disponibili per schede di sviluppo Raspberry Pi, Arduino, STM32 ed ESP32
  • 25,14 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) 296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • 1,54 pollici, 200 x 200 risoluzione, con controller integrato, comunicazione tramite interfaccia SPI, supporti rosso, nero, e bianco three-color display
  • Nota:Versione 2 please use corresponding demo code
  • A causa dei vantaggi come ultra low power consumption, ampio angolo di visualizzazione, grande effetto sotto il sole, è una scelta ideale per applicazioni come etichetta industriale, strumento industriale e così on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
  • 19,99 € SU AMAZON
Waveshare
Waveshare
2.13 Pollici E-Ink HAT Nero Bianco Rosso Giallo 4-Color E-Paper Display per Arduino/Raspberry Pi/Jetson Nano/STM32, Risoluzione 250x122 Pixel, Comunicazione SPI, Compatibile con MCU da 3.3V/5V
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • 2.13inch E-Paper HAT, red/yellow/black/white display color, 250×122 resolution, wide viewing angle, low power consumption, basically power is only required for refreshing
  • 2.13inch E-Ink display module onboard 3-wire / 4-wire SPI interface and Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi Zero W/Zero 2 W/Zero WH/4B/3B+/3B/2B, Arduino, Jetson Nano, STM32, etc. controller boards
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • No backlight, paper-like effect without electricity, keeps displaying last content for a long time even when power down
  • Provide online development resources and manual, examples for Raspberry Pi/Jetson Nano/Arduino/STM32 etc.
  • 24,99 € SU AMAZON
HANLEES
HANLEES
HANLEES Scheda stampante MKS 3D STM32 MKS Robin Nano scheda V1.2 Hardware open source (supporto Marlin2.0) Supporto con 3.5 pollici touch screen (Nano schermo wifi)
star

73

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Marca: HANLEES
  • Origine: CN (Origine)
  • Tipo di articolo: scheda madre
  • Numero di modello: MKS Robin Nano
  • 62,89 € SU AMAZON
Waveshare
Waveshare
Waveshare 250x122 Resolution 2.13 inch e-Paper Display HAT E-Ink Screen LCD Module SPI Interface with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W/Ardui/STM32/Jetson Nano
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Risoluzione 250x122 2.13 Pollici e-Paper Display HAT E-Ink Schermo LCD Modulo SPI Interfaccia con Controller Embedded per Raspberry Pi 2B 3B 3B+ 4B Zero Zero W/Ardui/STM32/Jetson Nano
  • Standard per Raspberry Pi 40PIN GPIO extension header, compatibile con schede Raspberry Pi serie, Jetson Nano
  • Traduttore di tensione integrato, compatibile con MCU 3.3V/5V
  • 20,15 € SU AMAZON
stm32