Ssd Raspberry Pi
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
14 marzo 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
16,39 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,46 € SU AMAZON
GeeekPi
GeeekPi N07 M.2 PCIe to NVMe Bottom SSD Pip PCIe Peripheral Board for Raspberry Pi 5,Support M.2 Key-M NVMe SSD 2230/2242/2260/2280 (SSD and Pi5 Board are Not Included)
Spedizione gratuita
87
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】GeeekPi N07 PCIe M.2 M-key NVMe SSD Pip Peripheral Board Bottom is only compatible with Raspberry Pi 5 8GB 4GB board. Nota: Raspberry Pi 5 board is not included.
【Supporto M.2 NVMe SSD】Raspberry Pi 5 N07 M.2 NVMe SSD Adapter Board is a bottom-mounted adapter and it supports the installation of M.2 M-key NVMe SSD 2230/2242/2260/2280.
【How to Power】Use 5 Vdc +/-5%, 5 A to power via Raspberry Pi 5 and Pi 5 will power N07 tramite pin pogo per extra power during large data transfer. and the data will transfer via FFC ribben cable with Raspberry Pi 5 via PCIe slot, consiglia di utilizzare GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
【Cooling Solution】Ventilazione hole design fornisce un'eccellente ventilazione dell'aria per il raffreddamento e supporto per Raspberry Pi 5 Active Cooler installazione.
Pacchetto incluso: 1 x N07 M.2 2280 PCIe to NVMe Bottom; 1 x cavo personalizzato PCIe FFC, 4 x M2,5 x 6 mm Copper pillar; 4 x M2,5 x 12+4 mm lungo Copper pillar; 4 x M2,5 x 4 mm Flat head screw; 2 x M2 x M2 x M2 mm Hard drive copper piller. ars and Screws (to fix NVME M.2 SSD)
【Wiki】https://wiki.52pi.com/index.php?title=EP-0211
15,99 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
43,00 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 with 512GB SSD, M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0 3.0, 800MB/s
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 512GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
54,95 € SU AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Cappello per Raspberry Pi 5, con ufficiale Raspberry Pi 5 Active Cooler, Supporto M.2 NVMe SSD 2230 2242 2260 2280
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Questo kit include un P33 M.2 NVME M-Key PoE+ HAT e un ufficiale Raspberry Pi Active Cooler, appositamente progettato per il più recente Raspberry Pi 5 model, prestazioni e compatibilità ottimali.
【High-Speed NVMe SSD Support】The HAT board supporta M.2 NVMe SSDs per accesso e archiviazione di dati veloce.
Interfaccia M.2: utilizza l'interfaccia PCIe per comunicazioni ad alte prestazioni tra SSD e Raspberry Pi.
【PoE HAT Design】 Semplifies power Delivery with Power over Ethernet, eliminating the need for additional power cables.
【802.3at PoE Support】Richiede un interruttore PoE compatibile 802.3at to provide up to 30W of power, ensuring sufficient power for demanding appations.
Massima potenza di consegna: capace di consegnare fino a 25 W a 5.1 V/4.5 A, adatto per l'alimentazione sia del Raspberry Pi che dell'NVMe SSD.
39,99 € SU AMAZON
GeeekPi
GeeekPi M.2 NVME SSD Adapter Board for Raspberry Pi 4 Model B 1GB /2GB /4GB /8GB
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Ampia capacità di archiviazione】La scheda adattatore consente di collegare SSD NVMe M.2 al Raspberry Pi, offrendo un aumento significativo della capacità di archiviazione. Ciò consente di archiviare e accedere a grandi quantità di dati, rendendolo ideale per progetti e applicazioni ad alta intensità di dati.
【Trasferimento dati ultra veloce】 Sfruttando la tecnologia NVMe, la scheda adattatore facilita il trasferimento dati ad alta velocità tra Raspberry Pi e SSD collegato. Ciò garantisce tempi di caricamento rapidi, funzionamento fluido e prestazioni complessive migliorate per i tuoi progetti Raspberry Pi.
【Facile installazione e compatibilità】La scheda adattatore è progettata per una facile installazione, collegandosi al Raspberry Pi tramite pin pogo senza necessità di cavi o saldature complesse. È anche compatibile con vari modelli di Raspberry Pi, offrendo flessibilità e praticità per diversi progetti.
【Fattore di forma compatto】Con il suo design compatto, la scheda adattatore si integra perfettamente con il tuo Raspberry Pi senza aggiungere volume inutile. Ciò è particolarmente importante per i progetti in cui lo spazio è limitato, garantendo un uso efficiente dell'impronta del Raspberry Pi.
【Versatilità e scalabilità futura】La scheda adattatore SSD M.2 NVMe amplia la gamma di applicazioni e progetti che puoi intraprendere con il tuo Raspberry Pi. Sia che tu stia costruendo un centro multimediale, una soluzione di storage di rete o un gateway IoT ad alte prestazioni, la scheda adattatore offre scalabilità, consentendo aggiornamenti o sostituzioni semplici degli SSD man mano che le tue esigenze sono in evoluzione.
【Wiki】https://wiki.52pi.com/index.php?title=EP-0171
39,99 € SU AMAZON
GeeekPi
GeeekPi N10 Tiny NVMe SSD Adapter Board for Raspberry Pi 5
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】The adapter board is compatible with Raspberry Pi 5 & M2 NVMe SSD 2230/2242 for fast M.2 NVME storage, leveraging its advanced features and connectivity options to deliver enhanced storage performance; it is fully compatible with Raspberry Pi OS, ensuring seamless integration and reliable operation without without in the Raspberry Pi epoca Cosystem.
【Installazione plug-and-play】Progettato per semplicità e convenienza, la scheda adattatore offre funzionalità plug-and-play, consente agli utenti di installare rapidamente e configurare NVMe SSD storage senza bisogno di procedure complesse.
【M-key Slot Compatibility】The adapter board is designed to accommodate M.2 NVMe SSDs with M-key slots, ensuring a secure and stable connecection between the SSD and the Raspberry Pi 5.
Supporto a forma di fattore: il supporto per tavolo misura sia i fattori di forma 2242 e 2230, referring to the dimensions of the SSD. Questo significa che può accogliere SSD che sono lunghi 22 mm e lunghi 40 mm (2242) o 22 mm larghi e 30 mm lunghi (2230).
【High Speed Connectivity】Equipped with PCIe Gen3 x4 interface, the adapter board ensures efficient data transfer between the NVMe SSD and the Raspberry Pi 5, delivering rapid access to stored data and improving overall system performance.
【Wiki】https://wiki.52pi.com/index.php?title=EP-0229
14,99 € SU AMAZON
raspberry pi ssd
raspberry pi 5 ssd
ssd raspberry pi 5
raspberry pi ssd kit
raspberry pi 3 ssd
raspberry pi 4 ssd
raspberry pi 4b ssd
ssd raspberry pi 3
ssd raspberry pi 4
raspberry pi hat ssd