Raspberry Pi Sim
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
15 marzo 2025
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
30,99 € SU AMAZON
KALEA-INFORMATIQUE
KALEA-INFORMATIQUE HAT 3G 4G LTE per Raspberry Pi, Samsung ARTIK, Latte Panda o ASUS Tinker. Per moduli MiniPCIe, con slot Nano SIM.
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Slot Mini PCIe plug-in compatibile con schede di copertura LTE UMTS/HSPA+ e GSM/GPRS/EDGE
Alimentazione 3A dimensioni 85 X 55 X 25 mm
Compatibile con i moduli Mini PCIe dei seguenti produttori Quad EC25 / EC21 / EC20 / UC20 / LTE-EP06 Sierra AirPrime MC series Telit LM960 LE910V2 HE910 LE910Cx Huawei ME909s-120 ME909s-821 ecc
Compatibile con schede madri come Raspberry Pi 4 3 2 B+ ASUS Tinker Board Rock 64 Samsung ARTIK Latte Panda
Inclusi nella confezione 1 X modulo 3G/4G/LTE 1 X cavo USB/MicroUSB 1 X cacciavite 8 X viti e dadi
26,90 € SU AMAZON
Waveshare
4G/3G/2G/GSM/GPRS/GNSS Hat Based SIM7600E-H for Raspberry Pi/Jetson Nano Support LTE CAT4 for Downlink Data Transfer/4G High-Speed Connection/Telephone Call/Sending SMS
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc; Supports GPS, BeiDou, Glonass, LBS base station positioning; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Onboard CP2102 USB to UART converter, for serial debugging; Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard audio jack and audio decoder for making telephone call;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper;Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), development resources: www.waveshare.com/wiki/SIM7600E_4G_HAT
82,55 € SU AMAZON
Raspberry Pi
Raspberry Pi Zero 2 W
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
1 GHz Quad-Core 64 bit Arm Cortex-A53 CPU
SDRAM da 512 MB
2,4 GHz 802.11 b/g/n Wireless LAN
Bluetooth 4.2, Bluetooth Low Energy (BLE), antenna a bordo
Mini porta HDMI e micro USB On-The-Go (OTG). Slot per scheda microSD. Alimentazione micro USB
29,15 € SU AMAZON
Raspberry Pi
Raspberry Pi 4 Modello B (4GB)
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
SDRAM LPDDR4-3200 da 1 GB, 2 GB, 4 GB o 8 GB (a seconda del modello)
2,4 GHz e 5,0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Gigabit Ethernet
2 porte USB 3.0; 2 porte USB 2.0.
Intestazione GPIO standard a 40 pin Raspberry Pi (completamente compatibile con le schede precedenti)
71,94 € SU AMAZON
Waveshare
Waveshare NB-IoT Hat for Raspberry Pi and Jetson Nano Based on SIM7020E B1/B3/B5/B8/B20/B28 Bands for Europe Asia Africa Australia for Intelligent Instruments Asset Tracking Remote Monitoring..
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
SIM7020E è applicabile principalmente in Europa, Asia, Africa e Australia. Interfaccia USB integrata, per alimentazione o debug. Pin di controllo UART, per connettersi a schede host come Arduino/STM32. Si prega di controllare i nastri supportati in base al fornitore di servizi locale al momento dell'ordine.
Intestazione di estensione GPIO 40PIN standard per Raspberry Pi, compatibile con schede serie Raspberry Pi, Jetson Nano. Fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32/Python) Supporta protocolli di comunicazione come LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, ecc.
Supporta protocolli di comunicazione come LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS ecc; Interfaccia USB integrata, per l'alimentazione o il debug dei pin di controllo Breakout UART, per il collegamento a schede host come Arduino/STM32
Il traduttore di tensione integrato, 3,3 V per impostazione predefinita, consente di passare a 5 V tramite un ponticello incorporato; slot per scheda SIM, supporta uno slot per schede SIM specifico NB-IoT, supporta una specifica scheda NB-IoT
2 indicatori LED, facili da monitorare lo stato di funzionamento. Velocità di trasmissione: 300 bps~921600 bit/s (predefinito 115200 bit). Controllo tramite comandi AT (comandi V.25TER, 3GPP TS 27.007 e SIMCOM AT) Bundle di baud: 300 bit/s ~ 921600 bit/s (115200 bit/s predefinito) Controllo tramite comandi AT (comandi V.25TER, 3GPP TS 27.007 e SIMCOM ATM )
28,99 € SU AMAZON
EXVIST
EXVIST 5G LTE Industrial M.2 (NGFF) a USB3.0 Adattatore W/NANO SIM Card Slot Per Modulo 5G LTE Come Quectel RM500Q ecc Applicabile per M2M & IoT Applicazioni Come Raspberry Pi Router Industriale ecc.
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Compatibilità: è compatibile con moduli 5G IOT NGFF (M.2) di alcune marche, come Quectel RM500Q, CNEE ecc.
Applicazione: può essere ampiamente utilizzato per applicazioni IoT M2M come router industriale, gateway domestico, STB, laptop industriale, laptop consumer, PDA industriale, tablet PC, videosorveglianza e segnaletica digitale, ecc.
Affidabilità: adotta il design del circuito elettrico industriale, il chip di alimentazione DC-DC e la corrente sincronizzata da 3,5 A per assicurarsi che il modulo possa funzionare sempre bene e mai offline anche in ambienti difficili.
Principio - La definizione di interfaccia di NGFF (M.2) è segnale USB e 3.7V, la tensione di ingresso 5V da USB sarà convertita in 3.7V tramite chip di alimentazione DC-DC per alimentare il modulo e UIM/scheda SIM.
Interfacce - Ci sono M.2 (NGFF) per il collegamento del modulo 5G IOT, connettore USB 3.0 che può essere compatibile con connettore USB3.0 e USB2.0, slot per schede SIM NANO (Push-Push Type) che supporta hot-plug ma non dual SIM.
21,26 € SU AMAZON
Raspberry Pi
Scheda Raspberry Pi 3 modello B+ (3B+) Raspberry PI 3B+ (1 GB) (3B Plus)
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Raspberry Pi 3B + 1 GB
54,70 € SU AMAZON
EXVIST
EXVIST 4G LTE Industrial Mini PCIe a USB (Tipo-C 3.1) Adattatore W/Slot per scheda SIM per modulo WWAN/LTE 3G/4G Adatto per applicazioni M2M e IoT come Raspberry Pi Router Industrial IP Camera
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Compatibilità - È compatibile con moduli 4G LTE Mini PCIe di marche, come Quectel EC25-AF EG25-G Mini PCIe ecc.
Applicazione - Può essere ampiamente utilizzato per la connessione di rete rapida che consente di lasciare il PC connettersi alla rete 4G direttamente dopo l'installazione del modulo Mini PCIe abbinato (ESCLUDED) e del driver corrispondente.
Affidabilità - Adotta la progettazione del circuito elettrico industriale, il chip di alimentazione DC-DC e due condensatori di tantalio esterni per assicurarsi che il modulo possa sempre funzionare bene e mai offline anche in ambiente severo.
Principio - La definizione dell'interfaccia di Mini PCIe è segnale USB e 3.6V, la tensione di ingresso 5V da USB sarà convertita in 3.6V tramite chip di alimentazione DC-DC per alimentare il modulo e la scheda UIM/SIM.
Interfacce - Ci sono connettore mini PCIe per il collegamento del modulo 4G LTE, connettore USB 2.0 (Type-C 3.1), slot per scheda SIM (tipo Push-Push) che non supporta hot-pluging.
13,11 € SU AMAZON
raspberry pi sim module
raspberry sim
raspberry sim module
modulo sim raspberry
raspberry sim 4g