Raspberry Pi Power Button
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
8 febbraio 2025
GeeekPi
GeeekPi DeskPi Lite Raspberry Pi 3 Case-with Power Button/Heatsink with PWM Fan/Dual Full-Size HDMI/Extra Two USB Port for Raspberry Pi 3B / 3B+
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Design with all ports on the back;It can be used as a set-top box.
39,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
SJ@JX
SJ@JX Arcade Controller Zero Delay Encoder PCB Board Arcade DIY Kit Joystick Button 5V Power for PC Raspberry Pi Android PS2 PS3
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Arcade Encoder Board For PC PS2 PS3, DIY Arcade Controller.
Includes PS2 plug and USB plug. You need to connect all the white plugs to the board.
100% Zero delay arcade USB encoder with USB cable & wires which make sure the other parts work perfectly!
Easy Installation Design! Just connected the push button and joystick, really plug and play!
Feel free to contact us for the detail wiring diagram instructions and manuals to built projects on Raspberry Pi
22,99 € SU AMAZON
SJ@JX
SJ@JX Arcade DIY Kit LED USB Encoder Board Zero Delay Arcade Controller Joystick Button Fight Stick Raspberry Pi Retro Pie MAME 5V LED Power
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Zero delay arcade game USB encoder board by SJ@JX.
Perfect fit for SANWA style Button and Joystick.
Power 5V supply and cable, making LED assembly very simple!
Suitable for Raspberry Pi, Retropie, MAME and all windows systems!
Plug and Play, It does not require any drivers.
17,99 € SU AMAZON
Geekworm
Geekworm X1200 5V UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs
【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1200 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1200-C1 Case (ASIN: B0D4Z7NDNP)
52,89 € SU AMAZON
PI PISUGAR
Pisugar S Plus Portable 5000 mAh UPS Litium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories handhold(Not Include Raspberry Pi)
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Funzione UPS: The external power supply is disconnected to continuously supply power and ottain the external power status. L'accesso esterno può trigger boot, adatto per proietti non attenti.
Input and output: 5 V3 A output, 5 V 3 A
GPIO button: It can trigger the device to turn on when it is turned off, and it can be used as a custom button after turning on (when the automatic power-on function is turned off)
Connessione bassa: metodo di connessione adatto, installazione completa in un minuto, senza influire GPIO espansione
Espansione: Espansione attraverso ricarica wireless e ricarica solare
50,89 € SU AMAZON
PI PISUGAR
Pisugar S portatile 1200 mAh UPS batteria al litio Pwnagotchi Power Module for Raspberry Pi-Zero W/WH Model Accessories handhold(Not Include Raspberry Pi)
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Funzione UPS: The external power supply is disconnected to continuously supply power and ottain the external power status. L'accesso esterno può trigger boot, adatto per proietti non attenti.
Input and output: 5V2A output, 5V2A input
GPIO button: It can trigger the device to turn on when it is turned off, and it can be used as a custom button after turning on (when the automatic power-on function is turned off)
Connessione bassa: metodo di connessione adatto, installazione completa in un minuto, senza influire GPIO espansione
Espansione: Espansione attraverso ricarica wireless e ricarica solare
41,31 € SU AMAZON
GeeekPi
GeeekPi DeskPi Super6C Raspberry Pi CM4 / CM5 Cluster Mini-ITX Board Raspberry Pi Compute Module 5 Mini ITX Cluster board 6 RPI CM4 / CM5 Supported,89W Power Supply Included
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
DeskPi Super6C is the Raspberry Pi cluster board a standard size mini-ITX board to be put in a case with up to 6pcs Raspberry Pi Compute Module 5 or Compute Module 4. For DeskPi Super6C ITX Case kit, please refer to the ASIN: B0BGXWXY73
6pcs Raspberry Pi CM4 / CM5 supported 1 Gbps RJ45 x2
Onboard ON/OFF and Reset button
12V FAN Header x3
DC 19v~24V or ATX 12V,Mini ITX Case supported
Package Includes: 1 x Raspberry Pi CM4 /CM5 Cluster Mini-ITX board, 1 x 89W Power Supply (Note: Raspberry Pi CM4 / CM5 board are Not Included)
Technical Support: https://github.com/DeskPi-Team/super6c
279,99 € SU AMAZON
GeeekPi
GeeekPi Metal Case for Raspberry Pi 5,with N05 M.2 NVMe SSD PCIe Peripheral Board,Official Active Cooler And 27W USB C Power Adapter for Raspberry Pi 5 8GB 4GB
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Compatibility】This kit includes a metal case, a N05 M.2 Key-M NVMe SSD PCIe Peripheral Board,an official active cooler and a PD 27W Power Adapter; It is compatible with the latest Raspberry Pi 5 4GB/8GB and supports M.2 NVMe SSD 2230 2242
【Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
【N05 PCIe Peripheral Board Included】N05 M.2 NVMe to PCIe Peripheral Board is designed for Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230 and 2242.
【Raspberry Pi 5 Active Cooler Included】Raspberry Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
【Raspberry Pi 5 Power Supply Included】5.1V 5A 27W USB C power Supply is designed for Raspberry Pi 5 board. The power adapter is equipped with Power Delivery technology, allowing for fast and efficient charging of compatible devices. It also offers a variety of output voltage options, including 5.1V at 5A, 9.0V at 3.0A, 12.0V at 2.25A, and 15.0V at 1.8A, providing flexibility for different device requirements.
49,99 € SU AMAZON
GeeekPi
GeeekPi Metal Case for Raspberry Pi 5,with N04 M.2 NVMe SSD PCIe Peripheral Board,Official Active Cooler And 27W USB C Power Adapter for Raspberry Pi 5 8GB 4GB
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】This kit includes a metal case, a N04 M.2 Key-M NVMe SSD PCIe Peripheral Board,and an official active cooler and a PD 27W Power Adapter; It is compatible with the latest Raspberry Pi 5 4GB/8GB and Supports M.2 NVMe SSD 2230 2242 2260 2280.
【Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
【N04 M.2 NVMe to PCIe Adapter Included】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
【Raspberry Pi 5 Active Cooler Included】Raspberry Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
【Raspberry Pi 5 Power Supply Included】5.1V 5A 27W USB C power Supply is designed for Raspberry Pi 5 board. The power adapter is equipped with Power Delivery technology, allowing for fast and efficient charging of compatible devices. It also offers a variety of output voltage options, including 5.1V at 5A, 9.0V at 3.0A, 12.0V at 2.25A, and 15.0V at 1.8A, providing flexibility for different device requirements.
45,99 € SU AMAZON
raspberry pi button
raspberry pi power
power bank raspberry pi
raspberry pi power supply
raspberry pi zero power
raspberry pi 4 power
power button
raspberry pi zero power supply
power bank raspberry pi 4
raspberry pi 4 power bank
#1 VINCITORE