Raspberry Pi Pcie
I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento:
24 gennaio 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
43,00 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,46 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 5 Custodia con ufficiale Active Cooler, supporto PCIe M.2 NVMe SSD Shield Top X1001 / X1000 / N04 / N05
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Compatibilità: ① Supporto Raspberry Pi 5 con PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ② Support separato Raspberry Pi 5 8 GB / 4 GB scheda madre ③ Support Official Raspberry Pi 5 Active Cooler, for N04 Kit, ASIN: B0CXPBQK7F, Per Pi5 8 GB with N04 Starter Kit,ASIN: B0D1QQ174C
Raffreddatore attivo ufficiale Raspberry Pi 5 incluso: il dispositivo di raffreddamento attivo per Raspberry Pi 5 è una soluzione di raffreddamento a clip dedicata per Raspberry Pi 5. Combina un dissipatore di calore in alluminio con una ventola a temperatura controllata per mantenere il tuo Raspberry Pi 5 a una temperatura operativa confortevole, anche sotto carichi pesanti.
Robusta e portatile: questa custodia in metallo per Raspberry Pi 5 è realizzata in materiale in ferro di alta qualità, può fornire una protezione forte e durevole per la vostra tavola Raspberry Pi 5.
Facile accesso a tutte le porte: la custodia per GeeekPi Raspberry Pi 5 può accedere in modo accurato al jack di alimentazione USB C, porte micro HDMI, porta USB, Ethernet jack, slot per schede SD, pulsante di alimentazione, connettori MIPI DSI/CSI a 4 fili e così via.
La confezione include: 1 custodia in metallo per Raspberry Pi 5, 1 caricatore ufficiale Raspberry Pi 5 attivo; 1 confezione di viti, 1 4 cuscinetti in gomma; 1 cacciavite. Nota: la scheda Raspberry Pi non è inclusa nella confezione.
Nota: non include Raspberry Pi 5 board, M.2 NVMe SSD, M.2 NVMe SSD Shield, M.2 NVMe SSD o adattatore di alimentazione.
22,80 € SU AMAZON
Geekworm
Geekworm P580-V2 Case | Support Raspberry Pi 5 & X1005 / X1002 PCIe to M2 NVMe SSD Base & Active Cooler
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Per Raspberry Pi 5 con PCIe a Dual M.2 NVMe Shield Base X1005 (ASIN: B0D89MZTCY); ② per Raspberry Pi 5 con PCIe to M.2 NVMe Shield Base X1002 (ASIN: B0CQXPCNZK)
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supporta l'installazione di raffreddamento attiva Raspberry Pi 5, insieme con fori di raffreddamento ben realizzati per garantire una dissipazione efficiente del calore
Facile accesso a Pi 5: la custodia P580-V2 Raspberry Pi 5 può facilmente accedere al jack di alimentazione Raspberry Pi 5 USB-C, porte micro HDMI, porte USB, Ethernet jack, slot per schede SD, pulsante di alimentazione, ecc.
Contenuto della confezione: 1 custodia in metallo P580-V2, 1 4 cuscinetti in gomma; 1 confezione di viti
Nota: non include la scheda madre Raspberry Pi 5, X1002/X1005 PIP Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, o adattatore di alimentazione. !
14,89 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter Board (D), Compatible with Raspberry Pi 5, Supports 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive, High-Speed Reading/Writing NVMe Adapter
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi, 8Gbps Data Rate, Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Two Power Supply Methods】Supports Power Supply Via PCIe Cable Or 3PIN Cable * Note: uses PCIe cable for power supply by default, you can add 3PIN cable in cases of insufficient power
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
16,99 € SU AMAZON
GeeekPi
GeeekPi N05 M.2 M-Key NVMe Hat per Raspberry Pi 5, M.2 2242 PCIe a NVMe SSD Shield Pip PCIe Scheda periferica Superiore per Raspberry Pi 5 4 GB/8 GB (Le schede SSD e Pi5 Non Sono Incluse)
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Compatibilità --- L'adattatore N05 M.2 da NVMe a PICe è progettato per Raspberry Pi 5. Supporta l'installazione di unità NVMe (chiave M) in formato M.2, dimensioni 2230 e 2242. Viti di montaggio SSD CNC personalizzato aggiuntivo, nessuna saldatura richiesta.
Supporto PCIe --- Interfaccia PCIe x1 negli standard Gen2 e Gen3.
Linee di segnale ultra-corte PCIe --- Il routing di traccia breve PCIe è più affidabile e veloce e soddisfa pienamente i requisiti di segnale di PCIe 3.0.
Sistema di alimentazione conforme a M.2 --- Regolatore di tensione integrato che fornisce fino a 3 A per la barra di alimentazione da 3,3 V, conforme a M.2 (NGFF).
Tutti gli accessori necessari inclusi --- Viene fornito con nastro PCIe FPC, viti M2 e M2.5, distanziatori e vite di montaggio CNC SSD personalizzata aggiuntiva.
16,88 € SU AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
16,43 € SU AMAZON
GeeekPi
GeeekPi Metal Case with N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board for Raspberry Pi 5,with Raspberry Pi 5 Official Active Cooler,Support M.2 NVMe SSD 2230 2242 2260 2280
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】This kit includes a metal case and a N04 M.2 Key-M NVMe SSD PCIe Peripheral Board,and an official active cooler, It is compatible with the latest Raspberry Pi 5 4GB/8GB and Supports M.2 NVMe SSD 2230 2242 2260 2280. with 27W Power Supply Kit, ASIN: B0CXPBQK7F.
【Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
【N04 M.2 NVMe to PCIe Adapter】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
【Raspberry Pi 5 Active Cooler Included】Raspberry Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
【Packing List】1x Metal Case for Raspberry Pi 5, 1x N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board, 1x Pi5 Active Cooler, 1x FPC Cable, 1x Screwdriver, 1x Screw Pack 【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD or Power Adapter.
35,99 € SU AMAZON
pcie raspberry pi
pcie raspberry pi 5
raspberry pi 5 pcie
raspberry pcie
raspberry pi 4 pcie
raspberry pi
raspberry-pi
raspberry pi 5 pcie sata
raspberry pi 5 pcie hat
raspberry pi 5 pcie cable
#1 VINCITORE
