Raspberry Pi Nas Hat
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
27 marzo 2025
ODSS
Raspberry Pi 5 Penta SATA HAT, fino a 5 dischi SATA HAT
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Confezione: 1 cappello Penta SATA
Perfettamente supportato da Raspberry Pi serie 5
La soluzione perfetta per server NAS: 4 SATA + 1 interfaccia eSATA
Ulteriori interfacce di espansione: progettato per supportare display OLED e ventola
Opzioni di interfaccia di alimentazione flessibile: interfaccia di alimentazione ATX standard o interfaccia di alimentazione CC 12V
117,58 € SU AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
SUNFOUNDER
SUNFOUNDER NAS Kit for Raspberry pi 4B 3B+ 3B 3A+ 2B, NAS Hat, Dual fan, Micro SD card Included
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Powerful Raspberry NAS kit - A customizable NAS Kit designs for Raspberry Pi which focus on providing a bigger Network attached storage for Raspberry Pi (Compatible with RPi 4B/3B+/3B/3A+/2B, Raspberry Pi is NOT included). This NAS kit is best for Raspberry hobbyist to expand the functions of Raspberry Pi for various creating experiments.
NAS Hat -The E-Ink screen makes it more power-efficient and provides you with a good visual experience, which is used to display Raspberry Pi's CPU temperature, CPU usage, disk usage, fan power, etc.
Abundant Expandability - You can add one more hard drive by simply adding the nylon standoff and acrylic board . The OpenMediaVault includes services such as SSH, (S)FTP, SMB/CIFS, DAAP media servers, RSync, BitTorrent clients, and more functions can be DIY by yourself.
Easy to Use - Simple product composition,accessories with corresponding numbers,and detailed tutorial makes it easy to set up.
Good Heat Dissipation - Dual fans and heat sinks installed ,working automatically when the CPU temperature exceeds 54 degrees,quickly and effectively solving the heating problem of Raspberry pi motherboard.
56,99 € SU AMAZON
Raspberry Pi
M.2 HAT+ pour Raspberry Pi 5
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,46 € SU AMAZON
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
Pin Name: The BCM numbering name of each pin is printed next to it
11,95 € SU AMAZON
KEYESTUDIO
KEYESTUDIO Respeaker 2-Mic Pi Hat v1.0 per Raspberry Pi 4 Module Zero e Zero W, Raspberry Pi B +, Raspberry Pi 2B e 3B/4B
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
This is keyestudio respeaker 2-mic pi cappello V1.0 scudo progettato per ai e applicazioni vocali. Si tratta di una bassa potenza stereo Codec basato sul wm8960.
Ci sono due microfoni sullo scudo per il suono Collection, tre apa102 RGB LED, pulsante di un utente e due connettori Grove per estensione di applicazione.
Inoltre, un jack audio da 3.5 mm o XH2.54-2P altoparlante di uscita può essere usato per l' uscita audio.
Con questo prodotto Shield, è possibile costruire una voce più potente e flessibile che si integra Amazon amazona servizi voce, Google Assistant, e molto altro ancora
Supporto tecnico: schema di collegamento, codice di esempio, utilizzando il metodo e le risorse sono forniti nella nostra pagina Wiki. L' assistenza tecnica è disponibile tramite e-mail o messaggio
13,99 € SU AMAZON
IBest
IBest Ethernet/USB HUB Hat for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3X USB Ports Compatible with USB2.0/1.1
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
3x USB ports, compatible with USB2.0/1.1
1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
20,89 € SU AMAZON
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SU AMAZON
raspberry pi 5 nas hat
raspberry nas hat
nas raspberry pi
raspberry pi nas
hat raspberry pi
raspberry pi hat
nas raspberry pi 4
nas storage raspberry pi
raspberry pi 4 nas
raspberry pi to nas
#1 VINCITORE
