Raspberry Pi Hat Gpio
I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento:
24 gennaio 2025
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
Pin Name: The BCM numbering name of each pin is printed next to it
11,95 € SU AMAZON
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
78,29 € SU AMAZON
Freenove
Freenove Breakout Board for Raspberry Pi Pico 1 2 W H WH, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Compatible Models: Raspberry Pi Pico / Pico H / Pico W / Pico WH / Pico 2 / Pico 2 W (NOT included in this kit)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi Pico, 2.54 mm (0.1 inch) pitch
Pin Name: The name of each Pin is printed next to it
12,95 € SU AMAZON
Waveshare
Waveshare Serial Expansion Hat for Raspberry pi Onboard SC16IS752 2 Channels(2-ch) UART 8 GPIOs I2C Interface Stackable to 16 Modules to 32-ch UART
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Onboard SC16IS752, expands 2-ch UART and 8 programmable GPIO through I2C, no extra pin required
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
It is stackable up to 16 this modules by setting the address jumper, that means up to 32-ch UART
Onboard multi LEDs for indicating the UART working status; Reserved I2C control pins, allows to work with other control boards
Download resources: www.waveshare.com/wiki/Serial_Expansion_HAT
15,65 € SU AMAZON
Waveshare
Waveshare Raspberry Pi Uninterruptible Power Supply UPS HAT Stable 5V Power Output Multi Battery Protection Circuits
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
33,95 € SU AMAZON
Waveshare
Waveshare PoE HAT (C) For Raspberry Pi 3B+/4B, 802.3af/at Power-Sourcing Equipment Required
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet accessory(with Standard Pi 40PIN GPIO Header) for the Raspberry Pi 3B+/4B
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Pi in only one Ethernet cable. Fully isolated switched-mode power supply (SMPS)
While providing stable power for Raspberry Pi, there's also a USB-A port for powering extra external device
Onboard high speed active cooling fan, better heat dissipation
24,99 € SU AMAZON
SEENGREAT
SEENGREAT Serial Expansion HAT for Raspberry Pi, Adopting SC16IS752 2 canali (2 ch) UART 8 GPIOs I2C Interface Stackable to 16 moduli, entended to 32 canali UART
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Onboard SC16IS752, può espandere 2 porte seriali e 8 IO programmabili attraverso I2C, non occupare ulteriori pin
Cambiando l'indirizzo jumper, fino a 16 moduli possono essere collegati allo stesso tempo, che è possibile espandere 32 porte seriali
Indicatori multipli onboard, facili da controllare lo stato di funzionamento della porta seriale estesa
Interfaccia di controllo I2C di riserva per un facile accesso ad altre schede di controllo principali
Based on 40P connector design for Raspberry Pi , suitable for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
15,50 € SU AMAZON
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SU AMAZON
Waveshare
Waveshare Poe Hat (F) for Raspberry Pi 5, 802.3af/at-Compliant, Power Over Ethernet Hat Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant.x
Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
29,90 € SU AMAZON
Coolwell
Coolwell Waveshare Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2x 40PIN Header Module HAT
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi 400
Color-Coded Header, Easy Expansion
Resources download: http://www.waveshare.com/wiki/PI400-GPIO-ADAPTER-B
10,55 € SU AMAZON
hat raspberry pi
raspberry pi hat
gpio raspberry pi
raspberry pi gpio
raspberry pi zero hat
raspberry pi gpio expansion
gpio raspberry pi zero
raspberry pi 4g hat
raspberry pi ethernet hat
raspberry pi tv hat
#1 VINCITORE
