Raspberry Pi Board Fili
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
3 febbraio 2025
ARCELI
ARCELI RPi GPIO scheda di espansione breakout + cavo a nastro + adattatore T tipo GPIO assemblato 20 cm FC40 cavo piatto a nastro 40pin per Raspberry Pi 3 2 modello B & B + SC05
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Assemblato RPi GPIO con 8 "Cavo a 40 pin per Raspberry pi 3B, Raspberry pi 2 modello B, Raspberry pi 1B +, Raspberry pi 1A +, Raspberry pi zero W, Raspberry pi zero
1 * GPIO 40P Rainbow Ribbon Cable a 40 pin
1 * GPIO Expansion Board
40 pin sono etichettati per una facile prototipazione
GPIO Adapter Plus per Raspberry Pi B +, Raspberry Pi 2, Raspberry Pi NON è incluso
5,99 € SU AMAZON
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
Pin Name: The BCM numbering name of each pin is printed next to it
11,95 € SU AMAZON
innomaker
InnoMaker Raspberry Pi HIFI DAC HAT PCM5122 HIFI DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero etc. (DAC HAT)
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
Absolutely perfect to support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
Comes with software, document and friendly technology support. For more information, please refer to our wiki（view the link on color page comes with the goods).
34,99 € SU AMAZON
Freenove
Freenove Mecanum Wheel Car Kit for Raspberry Pi Pico (Not Included) (Compatible with Arduino IDE), Dot Matrix Expressions, Obstacle Avoidance, Line Tracking, Light Tracing, Colorful Light, App
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
This car with Mecanum wheels based on Raspberry Pi Pico can move in various incredible ways. (Assembly required. Battery NOT included.)
Provides a step-by-step assembly tutorial and complete code -> The download link can be found on the product box. (No paper tutorial.)
Control methods -> Controlled wirelessly by your Android phone or tablet, iPhone (with Freenove App) and computer (run Windows or macOS). (Only for Pico W.)
Compatible models -> Raspberry Pi Pico / Pico H / Pico W / Pico WH. (NOT included in this kit.)
Needs battery -> Refer to "About_Battery.pdf" in downloaded file to buy.
54,95 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 5 Custodia con ufficiale Active Cooler, supporto PCIe M.2 NVMe SSD Shield Top X1001 / X1000 / N04 / N05
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Compatibilità: ① Supporto Raspberry Pi 5 con PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ② Support separato Raspberry Pi 5 8 GB / 4 GB scheda madre ③ Support Official Raspberry Pi 5 Active Cooler, for N04 Kit, ASIN: B0CXPBQK7F, Per Pi5 8 GB with N04 Starter Kit,ASIN: B0D1QQ174C
Raffreddatore attivo ufficiale Raspberry Pi 5 incluso: il dispositivo di raffreddamento attivo per Raspberry Pi 5 è una soluzione di raffreddamento a clip dedicata per Raspberry Pi 5. Combina un dissipatore di calore in alluminio con una ventola a temperatura controllata per mantenere il tuo Raspberry Pi 5 a una temperatura operativa confortevole, anche sotto carichi pesanti.
Robusta e portatile: questa custodia in metallo per Raspberry Pi 5 è realizzata in materiale in ferro di alta qualità, può fornire una protezione forte e durevole per la vostra tavola Raspberry Pi 5.
Facile accesso a tutte le porte: la custodia per GeeekPi Raspberry Pi 5 può accedere in modo accurato al jack di alimentazione USB C, porte micro HDMI, porta USB, Ethernet jack, slot per schede SD, pulsante di alimentazione, connettori MIPI DSI/CSI a 4 fili e così via.
La confezione include: 1 custodia in metallo per Raspberry Pi 5, 1 caricatore ufficiale Raspberry Pi 5 attivo; 1 confezione di viti, 1 4 cuscinetti in gomma; 1 cacciavite. Nota: la scheda Raspberry Pi non è inclusa nella confezione.
Nota: non include Raspberry Pi 5 board, M.2 NVMe SSD, M.2 NVMe SSD Shield, M.2 NVMe SSD o adattatore di alimentazione.
22,80 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi Micro GPIO Terminal Block Breakout Board Module with LED, Raspberry Pi GPIO Expansion Board Micro Connector for Raspberry Pi 4B/3B+/3B/2B/Pi Zero/Pi Zero W/Pi Zero 2 W
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Compatibile con tutte le serie Raspberry Pi: per Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero W, Pi Zero 2 W
Tutti i 40 pin di Raspberry Pi sono trasferiti dai terminali a vite, che sono comodi per l'accesso al cavo. Non occupa altro spazio, molto comodo quando si fa circuiti fai da te.
Facile da montare, indicatore LED GPIO, connessione stabile per circuiti di cablaggio
2 x 20 posizioni header connect to Raspberry Pi Board,Terminal block pitch is 2.54mm/0.1".
GPIO function mark sticky for easy identification. Dimensioni del filo da 28 AWG a 18 AWG, lunghezza striscia 4,5 mm, vite M1.6 in acciaio, testa a pin e rame per gabbie.
Supporto tecnico: https://wiki.52pi.com/index.php?title=EP-0168
17,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 Case, Raspberry Pi Universal HAT Size Case DIY Kit, Acrylic Case for Raspberry Pi 5 / Raspberry Pi 4B / 3B+ / 3B / 2B and Raspberry Pi Hat Expansion Board
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
It is a universal acrylic case DIY kit to install raspberry pi hat expansion board with Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B together.
This is a Protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.
Compatible with Raspberry Pi 4 Model B/ Pi 3 Model B+ / Pi3 Model B/ 2B / B+ and Pi Hat expansion board (Like X708 UPS/X728 UPS).
Packing List: 1 x Acrylic Case; 1 x Pack of Screws. (The raspberry pi or the expansion board is not included)
8,89 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter Board (D), Compatible with Raspberry Pi 5, Supports 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive, High-Speed Reading/Writing NVMe Adapter
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi, 8Gbps Data Rate, Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Two Power Supply Methods】Supports Power Supply Via PCIe Cable Or 3PIN Cable * Note: uses PCIe cable for power supply by default, you can add 3PIN cable in cases of insufficient power
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
16,99 € SU AMAZON
Waveshare
Waveshare Mini Base Board (A) Designed for Raspberry Pi Compute Module 4 Suitable for Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header
Suitable For Compute Module 4 Lite/EMMC Series Module
Onboard Multiple Connectors Including: CSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot
Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
25,99 € SU AMAZON
Waveshare
Waveshare Nano Base Board (A) per Raspberry Pi Compute Module 4, Stesse Dimensioni di CM4, con 1× Raspberry Pi 40PIN GPIO, 1× USB 2.0 Tipo A, 1× MIPI CSI-2 Porta, 5V/2.5A USB Tipo C Alimentazione
Spedizione gratuita
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Nano Base Board (A) for Compute Module 4 Lite/eMMC, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products
Same size as the CM4, standard CM4 socket, with multiple peripheral interfaces, suitable for narrow application environment
USB Type C interface can be used as a power supply or as a USB SLAVE interface to burn the image, in order to ensure the normal power supply of CM4, please do not connect other devices when using the Type C interface to burn the image
USB2.0 is disabled by default, if you want to open it, you need to add the line dtoverlay=dwc2,dr_mode=host to the config.txt file
DO NOT plug and unplug any device other than USB while it is powered on
23,90 € SU AMAZON
raspberry pi board
raspberry pi pico board
raspberry pi 4 board
raspberry pi cm4io board
raspberry pi pico w board
#1 VINCITORE
