Raspberry Pi Ai Hat+
I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento:
16 marzo 2025
Raspberry Pi
Raspberry Pi Kit AI
25% Sconto
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Contiene un acceleratore di inferenza della rete neurale capace di 13 tera-operazioni al secondo (TOPS)
Completamente integrato nello stack software della fotocamera di Raspberry Pi
Il cuscinetto termico premontato tra il modulo e HAT+ diffonde il calore tra i componenti, migliorando le prestazioni
Conforme alle specifiche Raspberry Pi HAT+
Fornito con intestazione impilabile da 16 mm, distanziatori e viti per consentire il montaggio su Raspberry Pi 5 con Raspberry Pi Active Cooler in posizione
97,67 € SU AMAZON
Raspberry Pi
M.2 HAT+ pour Raspberry Pi 5
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
Raspberry Pi
Raspberry Pi AI HAT+ (13TOPS)
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Acceleratore Hailo-8 o Hailo-8L che offre rispettivamente 26 TOPS o 13 TOPS che inferiscono le prestazioni
Completamente integrato nello stack software della fotocamera di Raspberry Pi
Conforme alle specifiche Raspberry Pi HAT+
Fornito con intestazione impilabile da 16 mm, distanziatori e viti per consentire il montaggio su Raspberry Pi 5 con Raspberry Pi Active Cooler in posizione
NVMe da 256 GB - 40k IOPS (letture casuali da 4 kB), 70k IOPS (scritture casuali 4 kB)
NVMe da 512 GB - 50k IOPS (letture casuali 4 kB), 90k IOPS (4 kB scritture casuali)
109,29 € SU AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, supports Hailo-8 AI Accelerator
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
40,00 € SU AMAZON
Waveshare
Waveshare PCIe to 2-CH M.2 HAT+ Adapter Type B Compatible with Raspberry Pi 5, Support 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive High-Speed Reading/Writing NVMe HAT
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
PCIe To 2-Ch M.2 Adapter Type B For Raspberry Pi 5, Compatible With 2280 / 2260 / 2242 / 2230 Size NVMe Protocol M.2 Solid State Drive , 5Gbps Data Rate, High-Speed Reading/Writing, Raspberry Pi 5 NVMe HAT.Adopts Anti-Oxidation Immersion Gold Process
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【Dual NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi , Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status. 【Onboard Power Monitoring Chip And EEPROM】Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
27,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
Waveshare
Waveshare PCIe TO USB 3.2 Gen1 HAT+ Expansion Card for Raspberry Pi 5, PI5 Adapter Board, 4 USB ports, 1-to-4 High-Speed USB Ports, HAT+ Standard, With Power Monitoring Chip & Fan Vent, Plug and Play
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
PCIe to USB 3.2 Gen1 Expansion Card with HAT+ Standard, specially designed for Raspberry Pi 5, driver free, plug and play
Based on Pi5's 16PIN PCIe interface design, can be connected to PI5 via 16PIN cable.
Extend the USB interface of Raspberry Pi 5, with PCIe to 4-way USB 3.2 Gen1 high speed interface, convenient to access more peripheral devices.
Support NVMe hard disk protocol, onboard power monitoring chip and EEPROM, more convenient to control the power status in real time, and support USB power control.
Reserved fan ventilation holes allow the PI5 to ventilate better and the hard disk to be cooler.
29,99 € SU AMAZON
GeeekPi
GeeekPi Custodia in metallo per Raspberry Pi 5, con ufficiale Raspberry Pi M.2 Hat+ and Active Cooler, supporto M.2 SSD 2230/2242
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Questo kit include una custodia in metallo, un ufficiale Raspberry Pi M.2 HAT+ and active cooler. It is compatible with the latest Raspberry Pi 5 4GB/8GB board and it supports M.2 NVMe SSD 2230 2242.
【Access to most porte】GeeekPi Raspberry Pi 5 Metal Case can accurately access most ports of Raspberry Pi 5 board, including usb-c power jack, micro HDMI porte, porte USB, jack Ethernet, sd card slot, power button, and GPIO port.
【Raspberry Pi 5 Active Cooler】Raspberry Pi 5 Active Cooler combina un heatsink in alluminio con un ventilatore PWM per mantenere il tuo Raspberry Pi 5 mantiene le temperature ottimali, prestazioni affidabili per varie applicazioni.
【Raspberry Pi M.2 HAT+】It supporti single-lane PCIe 2.0 interface and M.2 SSD 2230/2242. It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place.
【NOTA】Raspberry Pi 5 board non è incluso.
39,99 € SU AMAZON
Whadda
Whadda ReSpeaker 2-Mics Pi HAT per Raspberry Pi®, AI, applicazioni vocali, compatibile con Alexa, Google Assistant
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Educativo
Emozionante
Creativo
22,69 € SU AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Cappello per Raspberry Pi 5, con ufficiale Raspberry Pi 5 Active Cooler, Supporto M.2 NVMe SSD 2230 2242 2260 2280
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Questo kit include un P33 M.2 NVME M-Key PoE+ HAT e un ufficiale Raspberry Pi Active Cooler, appositamente progettato per il più recente Raspberry Pi 5 model, prestazioni e compatibilità ottimali.
【High-Speed NVMe SSD Support】The HAT board supporta M.2 NVMe SSDs per accesso e archiviazione di dati veloce.
Interfaccia M.2: utilizza l'interfaccia PCIe per comunicazioni ad alte prestazioni tra SSD e Raspberry Pi.
【PoE HAT Design】 Semplifies power Delivery with Power over Ethernet, eliminating the need for additional power cables.
【802.3at PoE Support】Richiede un interruttore PoE compatibile 802.3at to provide up to 30W of power, ensuring sufficient power for demanding appations.
Massima potenza di consegna: capace di consegnare fino a 25 W a 5.1 V/4.5 A, adatto per l'alimentazione sia del Raspberry Pi che dell'NVMe SSD.
39,99 € SU AMAZON
raspberry pi 5 ai hat
raspberry ai hat
raspberry pi hat+ ai 26tops
raspberry pi ai
pi ai hat+
hat raspberry pi
raspberry pi hat
raspberry pi 5 ai
raspberry pi ai kit
raspberry pi kit ai