Raspberry M2 Ssd
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
2 febbraio 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum NAS Case with PWM Fan and M.2 SATA SSD Adapter Board,Raspberry Pi 4 Passive Aluminum Case with 3510 Ultra-Quiet Cooling Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4 Model B --- This aluminum Case contains an Armor Lite Aluminum Heatsink and an M.2 SATA SSD expansion board,is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version.
The Case With High quality aluminium material --- sturdy and durable,It can protect the Raspberry Pi well and keep your Raspberry Pi 4 free from scratches, dust and damage.
With an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi
Good Heat Dissipation Effect --- With 3510 Ultra-Quiet Cooling Fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly. Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS.
We strongly recommend using the official Raspberry Pi operating system, which can directly configure the fan to adjust the speed according to the CPU temperature through the raspi-config command.Other operating systems may require you to write software yourself and send PWM signals to the fan through GPIO pins to control fan’s speed.
Package Includes: 1x Aluminum Case,1x 3510 Ultra-Quiet Cooling Fan,1x M.2 SATA SSD Expansion Board (Note:Raspberry Pi is Not Included!)
Technology support: wiki.52pi.com/index.php?title=ZP-0140
45,99 € SU AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
16,43 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,46 € SU AMAZON
GeeekPi
GeeekPi Custodia in metallo per Raspberry Pi 5, con ufficiale Raspberry Pi M.2 Hat+ and Active Cooler, supporto M.2 SSD 2230/2242
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Questo kit include una custodia in metallo, un ufficiale Raspberry Pi M.2 HAT+ and active cooler. It is compatible with the latest Raspberry Pi 5 4GB/8GB board and it supports M.2 NVMe SSD 2230 2242.
【Access to most porte】GeeekPi Raspberry Pi 5 Metal Case can accurately access most ports of Raspberry Pi 5 board, including usb-c power jack, micro HDMI porte, porte USB, jack Ethernet, sd card slot, power button, and GPIO port.
【Raspberry Pi 5 Active Cooler】Raspberry Pi 5 Active Cooler combina un heatsink in alluminio con un ventilatore PWM per mantenere il tuo Raspberry Pi 5 mantiene le temperature ottimali, prestazioni affidabili per varie applicazioni.
【Raspberry Pi M.2 HAT+】It supporti single-lane PCIe 2.0 interface and M.2 SSD 2230/2242. It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place.
【NOTA】Raspberry Pi 5 board non è incluso.
39,99 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 with 128GB SSD, M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0 3.0, 800MB/s
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
26,95 € SU AMAZON
GeeekPi
GeeekPi N07 M.2 PCIe to NVMe Bottom SSD Pip PCIe Peripheral Board for Raspberry Pi 5,Support M.2 Key-M NVMe SSD 2230/2242/2260/2280 (SSD and Pi5 Board are Not Included)
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】GeeekPi N07 PCIe M.2 M-key NVMe SSD Pip Peripheral Board Bottom is only compatible with Raspberry Pi 5 8GB 4GB board. Nota: Raspberry Pi 5 board is not included.
【Supporto M.2 NVMe SSD】Raspberry Pi 5 N07 M.2 NVMe SSD Adapter Board is a bottom-mounted adapter and it supports the installation of M.2 M-key NVMe SSD 2230/2242/2260/2280.
【How to Power】Use 5 Vdc +/-5%, 5 A to power via Raspberry Pi 5 and Pi 5 will power N07 tramite pin pogo per extra power during large data transfer. and the data will transfer via FFC ribben cable with Raspberry Pi 5 via PCIe slot, consiglia di utilizzare GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
【Cooling Solution】Ventilazione hole design fornisce un'eccellente ventilazione dell'aria per il raffreddamento e supporto per Raspberry Pi 5 Active Cooler installazione.
Pacchetto incluso: 1 x N07 M.2 2280 PCIe to NVMe Bottom; 1 x cavo personalizzato PCIe FFC, 4 x M2,5 x 6 mm Copper pillar; 4 x M2,5 x 12+4 mm lungo Copper pillar; 4 x M2,5 x 4 mm Flat head screw; 2 x M2 x M2 x M2 mm Hard drive copper piller. ars and Screws (to fix NVME M.2 SSD)
【Wiki】https://wiki.52pi.com/index.php?title=EP-0211
15,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum NAS Case with ICE Tower Cooler and M.2 SATA SSD Adapter Board,Raspberry Pi 4 Passive Aluminum Case with 4007 Ultra-Quiet PWM Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Compatibile con Raspberry Pi 4 modello B: questa custodia in mattoni in alluminio contiene un dispositivo di raffreddamento a torre ICE e una scheda di espansione SSD M.2 SATA è progettata solo per Raspberry Pi 4 modello B versione 1 GB/2 GB/4 GB/8 GB.
Custodia in alluminio di alta qualità, robusta e durevole, può proteggere bene il Raspberry Pi e proteggere il tuo Raspberry Pi 4 da graffi, polvere e danni.
Con una scheda di espansione SSD M.2 SATA che può espandere lo storage di massa per il tuo Raspberry Pi. Nota: le unità SSD Raspberry Pi 4B e M.2 SATA non sono incluse nella confezione, richiedono un acquisto aggiuntivo. Si prega di prestare attenzione al tipo di unità SSD, deve essere M.2 SATA SSD 2280, la scheda adattatore non supporta SSD NVME.
Buon effetto di dissipazione del calore: con il dispositivo di raffreddamento a torre Raspberry Pi può ridurre rapidamente la temperatura della scheda Raspberry Pi. Diverso dalle normali ventole, questa ventola di raffreddamento supporta la regolazione della velocità PWM, che è perfettamente compatibile con Raspberry Pi OS.
Si consiglia vivamente di utilizzare il sistema operativo Raspberry Pi ufficiale, che può configurare direttamente la ventola per regolare la velocità in base alla temperatura del processore tramite il controllo di configurazione Raspi. Altri sistemi operativi possono obbligarvi a scrivere tu stesso il software e a inviare segnali PWM alla ventola tramite i pin GPIO per controllare la velocità della ventola.
49,99 € SU AMAZON
Geekworm
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board with USB 3.1 Connector Support Key-B 2280 SSD
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Important Note】Pls format the new SSD before use.
【Raspberry Pi 4 NGFF SATA SSD Shield】X862 V2.0 Adapter supports M.2 NGFF SSD Key-B 2280 length for Raspberry Pi 4 8GB/4GB/2GB/1GB (NOT include Raspberry Pi board or SSD). UASP supported, NOT support TRIM
【How to Power】√ Model 1. power via Raspberry Pi 4: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK); √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Allows booting OS from HDD/SSD 】Booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot)
【Matching Metal Case(not included)】No matching case now. X857-C3 Case (ASIN: B08VJC5CD4) for X862 and Raspberry Pi 4 is out of stock and off-production.
31,89 € SU AMAZON
raspberry ssd m2
ssd m2 raspberry pi
raspberry ssd
ssd raspberry
raspberry pi 5 ssd m2
ssd m2 raspberry pi 5
raspberry m2
ssd for raspberry
2t ssd m2
raspberry pi 4 ssd m2
#1 VINCITORE
