Raspberry Lte Module
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
3 febbraio 2025
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi Jetson Nano Based on SIM7600G-H Supports LTE CAT4 up to 150Mbps for Downlink Data Transfer The Global Version Positioning Module
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
Supports dial-up, telephone call, SMS, , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on. Onboard CP2102 USB to UART converter, for serial debugging. Onboard audio jack and audio decoder for making telephone call. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
Breakout UART control pins, to connect with host boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. TF card slot for storing data like files, messages, etc. 2x LED indicators, easy to monitor the working status.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
96,99 € SU AMAZON
Coolwell
A7670E LTE Cat-1 HAT For Raspberry Pi, Multi Band Support, 2G GSM/GPRS, Enabling LTE Cat-1 / 2G Communication & LBS Positioning
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL; Supports dial-up, telephone call, SMS; Supports LBS base station positioning, it is able to get the approximate position info via mobile network
TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words;Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Ardui/STM32
Onboard USB interface, for testing AT Commands, network communication, and so on; Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
SIM card slot, supports 1.8V/3V SIM card;2x LED indicators, easy to monitor the operating status;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
38,30 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € SU AMAZON
KALEA-INFORMATIQUE
Kalea-INFORMATIQUE Hat 3G 4G LTE per Raspberry Pi, Samsung ARTIK, Latte Panda o ASUS Tinker. per Moduli MiniPCIe, con Slot Nano SIM.
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Slot Mini PCIe plug-in compatibile con schede di copertura LTE UMTS/HSPA+ e GSM/GPRS/EDGE
Alimentazione 3A dimensioni 85 X 55 X 25 mm
Compatibile con i moduli Mini PCIe dei seguenti produttori Quad EC25 / EC21 / EC20 / UC20 / LTE-EP06 Sierra AirPrime MC series Telit LM960 LE910V2 HE910 LE910Cx Huawei ME909s-120 ME909s-821 ecc
Compatibile con schede madri come Raspberry Pi 4 3 2 B+ ASUS Tinker Board Rock 64 Samsung ARTIK Latte Panda
Inclusi nella confezione 1 X modulo 3G/4G/LTE 1 X cavo USB/MicroUSB 1 X cacciavite 8 X viti e dadi
26,90 € SU AMAZON
coolwell
Coolwell Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi Raspberry Pi 5 4B+ 4B 3B+ 3B 2B+ Zero W WH Jetson Nano Based On A7670E Module GNSS Positioning Support LTE Cat-1/2G
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Per Raspberry Pi 5 Cat-1/GSM/GPRS/GNSS HAT, teste di prolunga standard Raspberry Pi 40 pin GPIO, adatto per schede Raspberry Pi series
Per Arduino Cat-1/GSM/GPRS/GNSS HAT, breakout common used control pins of the A7670E module, make it easy to connect with host board like for Arduino/STM32
Per Jetson Nano Cat-1/GSM/GPRS/GNSS HAT, supporta i protocolli tra cui TCP/IP, HTTP(s), MQTT(s), FTP(s) e SSL; supporta GPS, BeiDou, GLONASS positioning
Supporta il dial-up, la chiamata telefonica, SMS; supporta il posizionamento della stazione base LBS, è in grado di ottenere informazioni sulla posizione approssimativa tramite rete mobile
Con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32)
41,27 € SU AMAZON
EXVIST
EXVIST 4G LTE - Adattatore Industriale Mini PCIe a Mini PCIe con Slot per Scheda SIM (Flip) per modulo WWAN/LTE 3G/4G applicabile per Applicazioni M2M e IoT Come Raspberry Pi Router Industriale
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Compatibilità: è compatibile con moduli 4G LTE Mini PCIe di marchi come Quectel EC25-AF EG25-G Mini PCIe ecc.
Applicazione: può essere ampiamente utilizzato per applicazioni IoT M2M come router industriale, gateway domestico, STB, laptop industriale, laptop consumer, PDA industriale, tablet PC, videosorveglianza e segnaletica digitale, ecc.
Affidabilità - Adotta il design del circuito elettrico industriale per assicurarsi che il modulo possa funzionare sempre bene e mai offline anche in ambienti difficili.
Interfacce: ci sono connettori mini PCIe femmina per il collegamento del modulo 4G LTE, connettore mini PCIe maschio per il collegamento ad altri dispositivi, slot per scheda SIM (tipo flip) che non supporta hot-plugging.
13,57 € SU AMAZON
Generic
Scheda di espansione 4G HUB modulo di rete Air780e Scheda Ethernet 4G CAT1 LTE per Raspberry Pi Zero con indicatore di stato
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Modulo AIR780E-4G
Chip di conversione SL2.2S-USB
Indicatore luminoso di stato della rete AIR78OE a bordo blu
Modulo Air780E integrato
Rete completa 4G, adattabile a diversi operatori e prodotti
31,99 € SU AMAZON
IBest
IBest 4G / 3G / 2G / gsm/GPRS/GNSS Hat for Raspberry Pi, Based on SIM7600E-H, Support LTE CAT4 for Downlink Data Transfer, 4G Connection, Making Call, Sending SMS, Global Positioning
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Supports GPS, BeiDou, Glonass, LBS base station positioning.Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.Onboard USB to UART converter, for serial debugging.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Packing List: SIM7600E-H 4G HAT x1, LTE Antenna x1, GPS External Antenna (B) x1, USB type A plug to micro plug cable x2, RPi screws pack (2pcs) x1
75,60 € SU AMAZON
Waveshare
Waveshare Cat-1/GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi, Based On A7670E Module, LTE Cat-1 / 2G Support, GNSS Positioning
Spedizione gratuita
64
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. Supports dial-up, telephone call, SMS.
Supports LBS base station positioning, it is able to get the approximate position info via mobile network. Supports GPS, BeiDou, GLONASS positioning. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words.
Onboard USB interface, for testing AT Commands, network communication, and so on. Onboard audio jack for sound recording, making telephone calls, listening the TTS resulting speech, etc.
Breakout common used control pins of the A7670E module, make it easy to connect with hosts boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. 2x LED indicators, easy to monitor the operating status. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, satellite positioning, and so on.
42,99 € SU AMAZON
lte module
raspberry lte
raspberry module
blackvue lte module
lte module jetson
#1 VINCITORE
