main logo

Poe Injector 48v 120w

I 10 migliori prodotti di marzo 2025
Ultimo aggiornamento: 25 marzo 2025
ZHANGQING
ZHANGQING
ZHANGQING PoE Injector Midspan with 24-Port, 10/100 Data Rate, 48V 120W Power Supply, for IEEE 802.3af Passive & Features 19 Inch Rack Mount with Mode B Power over Ethernet Injector, POE-24-48V120W
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • POE-24-48V120W combo includes a POE-24-1U PoE Injector, and a 48 volts 120 watts power supply (the injector isolated from each other via a diode bridge), this midspan injector is suitable for IEEE 802.3af Passive devices or 12 volts PoE; and it features a 19-inch rack mount design (1.75 x19 x 1 inch) with Mode B - (Pins 4/5 plus, 7/8 minus).
  • This multi-port PoE power injector uses any Ethernet switch (passes all management info transparently) and power is equally shared as needed by the devices, with 650 ma automatic resettable fuse on each port; it’s ideal for IP Cameras, VOIP phones, WiFi Access Points with 802.3af or 802.3at or passive.
  • A) If the injector is used for WiFi access points & IP cameras, it requires 48V and using 2 suppliers for IEEE 802.3af passive devices will provide an average output of 10W per port; b) If it is used for VoIP phones, the power input requirement is also 48 volts, but using a supply for IEEE 802.3af passive devices will provide an average output of 5W per port; c) If the injector is used for 24v passive devices such as Ubiquiti, Mikrotik, OpenMesh, the input requirement is 24 volts.
  • POE-24-1U features 19 inches rack mount injector with 24 Shielded RJ45 LAN and 24 Shielded RJ45 LAN+POE port, which is 2 data pairs active for 10/100 data rates ( 1/2, 3/6 pass-thru) and 2 inactive pairs used for power ( 4/5 plus and 7/8 minus).
  • Using a 24-port Power over Ethernet injector can be more cost-effective than installing separate power outlets for each PoE-enabled device; The installation of a multi-PoE injector is straightforward and does not require any additional configuration; You only need to connect the injector to a power source and then connect the PoE-enabled devices to the injector.
  • 55,99 € SU AMAZON
YuanLey
YuanLey
Adattatore Iniettore PoE Gigabit YuanLey 30W, Converte Non-PoE in PoE Gigabit, Iniettore Power over Ethernet 48V IEEE 802.3af/at, Iniettore PoE+ 10/100/1000Mbps Plug & Play, Distanze fino a 100 Metri
10% Sconto Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 【Iniettore PoE Gigabit 30W】L'iniettore PoE 30W è conforme agli standard IEEE802.3af/at, offrendo una porta Ethernet Gigabit in ingresso e una porta Gigabit PoE/PoE+ in uscita. Supporta un budget di alimentazione di 30W e una velocità di rete di 1000Mbps.
  • 【Tecnologia Intelligente di Rilevamento Automatico】Questo iniettore PoE+ Gigabit da 30W rileva automaticamente i dispositivi collegati e fornisce fino a 30W di potenza e dati Gigabit attraverso un unico cavo Ethernet. È retrocompatibile con i dispositivi IEEE802.3af, fornendo 15,4W quando necessario. Metodo di alimentazione: 12+, 36-, 48V PoE.
  • 【Design Compatto e Durevole】Realizzato con un involucro in plastica ignifuga, l'adattatore PoE Gigabit 30W è sicuro e affidabile. La sua struttura compatta garantisce il funzionamento stabile tra -10℃ e 40℃, con indicatori LED per mostrare lo stato operativo in tempo reale.
  • 【Installazione Semplice】Alimenta facilmente telecamere IP, access point wireless e altri dispositivi di rete con questo iniettore PoE Plug-and-Play. Non è richiesta alcuna configurazione: basta collegare i dispositivi compatibili PoE per soddisfare varie esigenze di installazione.
  • 【Ampia Distanza di Trasmissione】L'adattatore iniettore PoE+ converte una porta Gigabit non-PoE in una porta PoE/PoE+. Supporta la trasmissione di alimentazione fino a 100 metri (328 piedi), ideale per access point o telecamere di rete installati su ampie aree.
  • 19,78 € SU AMAZON