Poe Hat
I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento:
11 novembre 2024
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
28,99 € SU AMAZON
DSLRKIT
DSLRKIT Power Over Ethernet Poe Hat IEEE802.3af DC 5V 2.5A with 1.5KV Isolation for Raspberry Pi 4 4B 3B+ 3B Plus
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V~57V Passive Power Over Ethernet PoE Switch; Support 48V~57V Passive Power Over Ethernet PoE injector
Maximum.12Watt DC5V 2.5A
With 1.5KV isolation
Compatible unsolicited Passive PoE switch
11,90 € SU AMAZON
IBest
Power Over Ethernet Hat (B) Poe Hat for Raspberry Pi 4 B/3 B+,802.3af-Compliant,37V ~ 57V DC Input,5V 2.5A DC Input, Onboard 0.91" OLED for Monitoring Processor Temperature, IP Address
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Poe HAT with Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B
PoE (Power Over Ethernet) capability,802.3af-compliant.Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins
Fully isolated switched-mode power supply (SMPS)
0.91" OLED, for monitoring processor temperature, IP address, and fan status in real-time
Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch.
30,65 € SU AMAZON
Waveshare
Waveshare Poe Hat (F) for Raspberry Pi 5, 802.3af/at-Compliant, Power Over Ethernet Hat Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant.x
Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
29,90 € SU AMAZON
Waveshare
Waveshare PoE HAT (G), Compatible with Raspberry Pi 5, 5V 5A Output, Stable Performance, Supports 802.3af/At Network Standard, Power Over Ethernet HAT (G), Suitable for RPi 5 Official Case
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
✅Power Over Ethernet HAT For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, 5V 5A Output, Compatible With Raspberry Pi 5 Official Case
✅Standard Raspberry Pi 40PIN GPIO header. PoE capability,IEEE 802.3af/at-compliant
✅By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
✅Onboard original IC solution for more stable PoE power performance
✅Adopts non-isolated switched-mode power supply (SMPS). Compact and easy to assemble
26,99 € SU AMAZON
DSLRKIT
DSLRKIT Power Over Ethernet PoE HAT IEEE802.3at DC 5V 4A PoE+ with 1.5KV Isolation for Raspberry Pi 4 4B 3B+ 3B Plus
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V~57V Passive Power Over Ethernet PoE Switch; Support 48V~57V Passive Power Over Ethernet PoE injector
With 1.5KV isolation
Maximum. 20Watt DC5V 4A
Compatible unsolicited Passive PoE switch; Additional terminal block output DC5V
17,90 € SU AMAZON
Waveshare
Waveshare Poe Hat for Raspberry Pi 4B 3B+, IEEE 802.3af-Compliant,Power Over Ethernet Hat (E) Expansion Board for Raspberry Pi,5V Power Output
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
PoE (Power Over Ethernet) capability,IEEE 802.3af-compliant
Fully isolated switched-mode power supply (SMPS)
Smaller and more flexible with a more compact component layout
26,50 € SU AMAZON
Waveshare
Waveshare PCIe To M.2 HAT+ Adapter With PoE Compatible with Raspberry Pi 5, Supports NVMe Drive Protocol 2230/2242 M.2 Solid State Drive and 802.3af/at Network Standard, High-speed Reading/Writing
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € SU AMAZON
Waveshare
Waveshare PoE Power Over Ethernet HAT (F) Compatibele with Raspberry Pi 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
Provide e-user manual, please check the manual carefully before using!
30,99 € SU AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Cappello per Raspberry Pi 5, con ufficiale Raspberry Pi 5 Active Cooler, Supporto M.2 NVMe SSD 2230 2242 2260 2280
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Questo kit include un P33 M.2 NVME M-Key PoE+ HAT e un ufficiale Raspberry Pi Active Cooler, appositamente progettato per il più recente Raspberry Pi 5 model, prestazioni e compatibilità ottimali.
【High-Speed NVMe SSD Support】The HAT board supporta M.2 NVMe SSDs per accesso e archiviazione di dati veloce.
Interfaccia M.2: utilizza l'interfaccia PCIe per comunicazioni ad alte prestazioni tra SSD e Raspberry Pi.
【PoE HAT Design】 Semplifies power Delivery with Power over Ethernet, eliminating the need for additional power cables.
【802.3at PoE Support】Richiede un interruttore PoE compatibile 802.3at to provide up to 30W of power, ensuring sufficient power for demanding appations.
Massima potenza di consegna: capace di consegnare fino a 25 W a 5.1 V/4.5 A, adatto per l'alimentazione sia del Raspberry Pi che dell'NVMe SSD.
39,99 € SU AMAZON
hat poe
poe hat raspberry
raspberry poe hat
poe hat raspberry 3b
poe hat raspberry pi
raspberry pi poe hat