Nano Pi
I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento:
31 gennaio 2025
Raspberry Pi
Raspberry Pi Zero 2 W
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
1 GHz Quad-Core 64 bit Arm Cortex-A53 CPU
SDRAM da 512 MB
2,4 GHz 802.11 b/g/n Wireless LAN
Bluetooth 4.2, Bluetooth Low Energy (BLE), antenna a bordo
Mini porta HDMI e micro USB On-The-Go (OTG). Slot per scheda microSD. Alimentazione micro USB
28,90 € SU AMAZON
Pibiger
Pibiger 8m imx219 camera module for raspberry pi,jetson nano,jetson xaiver with fixed lens fov 62
27% Sconto
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
-Compatible with raspberry pi camera v2;
-Support Raspberry Pi and Jetson Nano;
-M12 Lens FOV60/FOV90/FOV160 Options;
-1x15PIN FPC Cable;-1x22PIN FPC Cablle;
-Only need to set dtoverlay=imx219,camera_auto_detect=0 on config.txt;
8,74 € SU AMAZON
Waveshare
Waveshare High-Precision AD HAT for Raspberry Pi/Jetson Nano with ADS1263 Onboard 10-Ch 32-Bit Support ADC AD Input Headers for Analog Sensor Module and AD Input Screw Terminal for Analog Signal
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Compatible With Raspberry Pi Series And Jetson Nano
Adopts ADS1263 chip, low noise, low temperature drift, 10-ch 32-bit high precision ADC (5-ch differential input), 38.4kSPS Max sampling rate with embedded 24-bit auxiliary ADC, internal ADC test signal, IDAC, 2.5V internal reference voltage, 8x multiplexing GPIO, PGA (32 times Max)
Onboard AD header input, compatible with Waveshare sensor pinout, for connecting sorts of sensor modules
Onboard AD screw terminal input, allows connecting analog signal and analog power supply, general purpose interface
Onboard control header, make it easy to control the module by other hosts in additional to Raspberry Pi;Three-wire RTD (resistor temperature detector) circuit, enabled by soldering 0R resistor
49,99 € SU AMAZON
Freenove
Freenove 7 Inch HDMI Touchscreen Monitor for Raspberry Pi 5 4 Jetson Nano PC (No Shell), 1024x600 Pixel IPS Display, 5-Point Touch Capacitive Screen
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Compatible models -> Raspberry Pi 5 / 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ (Zero W / Zero needs USB and HDMI adapters, which are not included in this product) run Raspberry Pi OS / Ubuntu, NVIDIA Jetson Nano Developer Kit / 2GB Developer Kit run Jetson Linux, computers with an HDMI output port run Windows 11 / 10 / 8 / 7. (Note: Raspberry Pi requires manual configuration of resolution, other devices usually adjust automatically.)
Screen parameters -> 7 inch, 1024 x 600 pixel, IPS wide viewing angle, 5-point touch capacitive screen, HDMI input. (Note: This monitor does NOT have a shell.)
Multi touch -> Support up to five-point touch. (Only certain systems and software support multi-touch.)
Two modes -> Standing mode (installed 2 stands) and laying mode (installed 4 brass standoffs).
Get support -> Our technical support team is always ready to answer your questions.
66,95 € SU AMAZON
Waveshare
Nano Base Scheda(B) per Raspberry Pi Compute Module 4, Stesse Dimensioni di CM4, con Presa CM4 Standard, RPi 40PIN GPIO, Gigabit Ethernet, USB 2.0, DSI, CSI, HDMI, Jack Audio da 3.5mm ecc.
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Nano Base Board (B) for Raspberry Pi Compute Module 4 Lite/eMMC, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products
Same size as Raspberry Pi CM4, standard CM4 socket, suitable for narrow application environment
Multiple Peripheral Interfaces: Raspberry Pi 40PIN GPIO header × 1, Gigabit Ethernet RJ45 connector, UUSB 2.0 Type A connector × 1, MIPI DSI port × 1, MIPI CSI-2 port × 1, Mini HDMI port × 1, 3.5mm audio jack etc. all in the compact body just as the size of CM4
Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
Note: The CM4 is NOT included. Please buy it separately if necessary
27,90 € SU AMAZON
Waveshare
Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
45,99 € SU AMAZON
coolwell
Coolwell SIM7028 NB-IoT HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W for Arduino Jetson Nano Supports Global Band NB-IoT Communication with GSM Antenna
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
NB-IoT HAT for Raspberry Pi, teste di prolunga standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi e Jetson Nano, ecc.
NB-IoT HAT for Jetson Nano, supporta TCP, UDP, LWM2M, COAP, DTLS, DNS, NTP, PING, HTTP(S), MQTT(S), TLS/SSL, ecc.; supporto per applicazioni SIM: SAT Class 3, GSM 11.11, USAT
NB-IoT HAT for Arduino, interfaccia di tipo C per il debug del software; pin di controllo UART Onboard, per il collegamento con schede host come Ardui/STM32
Da USB a chip UART, il pin di comunicazione UART può essere configurato tramite jumper; slot per scheda SIM nano integrata, compatibile con schede specifiche NB-IoT
Con risorse di sviluppo online e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/ESP32)
23,99 € SU AMAZON
Freenove
Freenove 8MP Camera for Raspberry Pi 5 4 B 3 B+ A+ Zero 2 W Jetson Nano with Adjustable Holder and Ribbon Cable, 120° Viewing Angle, 1080P 720P Output
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400, which only supports USB cameras), NVIDIA Jetson Nano Developer Kit / 2GB Developer Kit
Detailed Tutorial: Provides step-by-step guide to show you how to use (The download link can be found on the product box) (No paper tutorial)
Camera Parameters: 8 megapixels (3280 x 2464 pixels), 120° field of view, 1080p 30fps, 720p 60fps video modes
Adjustable Holder: Allows you to easily adjust the camera to the most suitable angle
Get Support: Our technical support team is always ready to answer your questions
16,95 € SU AMAZON
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) 296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Note:New Version please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
29,99 € SU AMAZON
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
raspberry pi nano
nano pi neo air
#1 VINCITORE
