main logo

Microswiss K1 Max

I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento: 23 gennaio 2025
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 74,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.4mm
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hardware Kit for Creality K1 / K1 Max
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • This is a spare hardware kit for FlowTech hotend
  • 7,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.8mm
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 14,85 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.6mm
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1C    
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 77,52 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process.
  • FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience.
  • 19,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Direct Drive Estrusore per stampanti Creality CR-10 / Ender 3
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Nessuna modifica richiesta, semplice plug and play.
  • Senza staffe o panini stampati.
  • Caratteristiche: Treno a doppio azionamento Acciaio temprato per utensili, ingranaggi di precisione CNC Impugnatura regolabile Facile caricamento del filamento Percorso di filamento corto e altamente vincolato Stampa filamenti flessibili ad alta velocità e precisione Eccezionale controllo dell'estrusione Corpo in alluminio leggero
  • 89,98 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss NG™ - Estrusore adatto per le stampanti Creality CR-10 / Ender 3
Spedizione gratuita
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Questo estrusore supera le prestazioni di tutte le controparti correnti sul mercato, per creare un'esperienza di stampa ottimale accessibile a tutti.
  • Con il design Bevel Gear, è compatibile con le dimensioni del filamento corto dell'industria (non oltre i 41 mm).
  • Il posizionamento particolare del motore consente di avere un design compatto e con poca sporgenza. Questo sistema aumenta la rigidità.
  • Adatto per un'ampia gamma di stampanti 3D.
  • Made in USA by Micro Swiss.
  • 130,38 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss NG™ Direct Drive Extruder for Creality CR-10 / Ender 3 Printers (Linear Rail Edition)
Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Questo estrusore supera le carenze di tutte le controparti attuali sul mercato, per creare un'esperienza di stampa ottimale per tutti.
  • Con il design Bevel Gear, siamo in grado di ottenere il percorso del filamento più breve del settore (meno di 41 mm).
  • L'esclusivo posizionamento del motore consente un design estremamente compatto e a bassa sporgenza. Ciò aumenta ulteriormente la rigidità del sistema.
  • Prodotto negli Stati Uniti da Micro Swiss
  • 149,99 € SU AMAZON
microswiss hotend k1 max k1 max microswiss k1 k1 max ai