main logo

Lithium Battery Bms

I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento: 26 novembre 2024
TECNOIOT
TECNOIOT
TECNOIOT 5pcs 4S 40A 14.8V 16.8V 18650 Lithium Battery Protection Board BMS PCB
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • 【4S40A】4S 40A 18650 Lithium Li-ion Battery Protection Board.
  • 【Design compact】Charging Voltage: 16.8V~18.1V; Continuous Discharge Current (upper limit): 40A(If the cooling environment is not good, please reduce the use of load current.);Continuous Charge Current (upper limit): 20A;Size: About 45x55x3.4mm/1.8x2.2x0.13";Scope: Nominal voltage of 3.6V, 3.7V lithium battery(including 18650, 26650, lithium polymer battery).
  • 【Easy operation-1】 1. Please allow tiny size deviations due to human measurement.2. This item is an enhanced version BMS PCB without any equalized charging.3. The successful start of the drill requires four 10C-20C power battery, or eight 5C-10C power battery(ordinary 18650 can not start the drill!!).
  • 【Easy operation-2】4. Strictly according to wiring guide 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not touch any components on the board while soldering the wire to avoid short circuit. 5. When soldering the battery for the first time or when charging, as long as a single battery exceeds 4.2V, the "430" resistor will heat up and discharge (stopping heating when discharged to 4.19V or so). If the "430" resistor is severely heated (it's too hot to touch), please check if the wrong line is connected.
  • 【Easy operation-3】6. When connecting 4 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If they are different, please charge each group of batteries individually and reconnect it in series. In the discharge test, the battery with a faster voltage drop is a poor battery.
  • 15,05 € SU AMAZON