main logo

High Flow Nozzle

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 18 aprile 2025
Bondtech
Bondtech
Bondtech CHT® Coated Brass Nozzle 0,4 mm -1 pcs  
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • These are nozzles for High Flow applications
  • Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
  • A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
  • 26,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 0.4mm
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Plated with Non-stick Composite Additive TwinClad XT Plating
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
  • The FlowTech CHT nozzle is compatible with all FlowTech hotend models
  • 26,99 € SU AMAZON
KOYOFEI
KOYOFEI
KOYOFEI 12 pezzi in ottone M6 Nozzles for K1, 3D Printer Parts High Speed and High Flow 0,4 mm Brass Nozzles Kit for Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • KOYOFEI 12 pezzi di ugelli M6 in ottone per stampanti K1, parti per stampanti 3D ad alta velocità e flusso alto 0,4 mm in ottone per Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4
  • La confezione include: questo kit di ugelli contiene 12 ugelli ad alto flusso da 0,4 mm.
  • Modelli compatibili: questi ugelli in ottone sono compatibili con le stampanti 3d Creality K1, K1 Max, Ender 3 V3 KE, CR-10 SE, CR-M4.
  • Parete interna liscia: rispetto agli ugelli convenzionali, l'ugello M6 K1 ha una parete interna liscia con meno disturbi, minore viscosità e una spinta del filamento più delicata.
  • Smusso di alimentazione con apertura rotonda: l'ugello è progettato con uno smusso di alimentazione liscio con un'apertura rotonda, che riduce significativamente la resistenza all'attrito del filamento e favorisce un'alimentazione più uniforme del filamento.
  • 15,99 € SU AMAZON
Bondtech
Bondtech
Bondtech CHT Vol Coated Brass Nozzle - 0,4 mm -1 pcs
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • These are nozzles for High Flow applications, They are manufactured by Bondtech in-house.
  • Compatible with 2.85mm filament
  • Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
  • 33,99 € SU AMAZON
E3D
E3D
E3D Fully Assembled High Flow ObXidian™ HotEnd for Bambu Lab P1 Series - 0.4mm
Spedizione gratuita
star

86

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
  • Bambu Lab's P1 series printers are built for speed. However, the motion system has headroom to be even better. Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
  • We've applied our E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
  • 139,99 € SU AMAZON
E3D
E3D
E3D RapidChange Revo Nozzle Assembly High Flow Boxed 0.4mm
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • La stampa 3D ad alte prestazioni è a soli 30 secondi dal cambio dell'ugello! Ottieni risultati ad alto flusso nello stesso fattore di forma di un Revo E3D standard grazie alla geometria ottimizzata dell'ugello interno. Gli ugelli ad alto flusso possono essere utilizzati con i nuclei di riscaldamento esistenti da 40 W per massimizzare la portata con materiali di stampa standard.
  • A differenza dei nostri precedenti E3D High Flow Hotend (Volcano e SuperVolcano), Revo High Flow mantiene lo stesso fattore di forma degli HotEnd Revo standard; Ciò significa che non è necessario regolare le staffe e i condotti della ventola preesistenti! Revo High Flow utilizza una geometria interna unica e personalizzata per aumentare la superficie e migliorare il trasferimento di calore al filamento.
  • 59,46 € SU AMAZON
E3D
E3D
E3D RapidChange Revo™ ObXidian High Flow Nozzle - 1.2mm
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle.
  • This is achieved by pairing a tool steel insert with the new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself resulting in considerably less plastic build up around the Nozzle.
  • Revo ObXidian High Flow increases your setup's volumetric flow rate, enabling you to print abrasive materials faster!
  • E3D
  • 78,90 € SU AMAZON
E3D
E3D
E3D RapidChange Revo™ ObXidian High Flow Nozzle - 0.6mm
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle.
  • This is achieved by pairing a tool steel insert with the new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself resulting in considerably less plastic build up around the Nozzle.
  • Revo ObXidian High Flow increases your setup's volumetric flow rate, enabling you to print abrasive materials faster!
  • E3D
  • 78,45 € SU AMAZON
E3D
E3D
E3D RapidChange Revo™ ObXidian High Flow Nozzle - 0.4mm
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle.
  • This is achieved by pairing a tool steel insert with the new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself resulting in considerably less plastic build up around the Nozzle.
  • Revo ObXidian High Flow increases your setup's volumetric flow rate, enabling you to print abrasive materials faster!
  • E3D
  • 78,45 € SU AMAZON
Sea 3D
Sea 3D
5 ugelli Volcano da 0,4 mm per stampante 3D Nozzle 1,75 mm, ugelli High Flow per Anycubic, Artillery
Spedizione gratuita
star

64

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Ugello per Anycubic Vyper, Artillery Genius, Artillery Sidewinder X2 ecc.
  • Adatto per molti Hotend High Flow con blocco riscaldante Volcano
  • Dimensioni da 0,4 mm a 1 mm di diametro
  • Ugelli Volcano
  • Adatto per tutti i filamenti con diametro di 1,75 mm
  • 10,81 € SU AMAZON
high flow nozzle mk8 high flow franke high flow