Fan Hub Argb
I 10 migliori prodotti di settembre 2024
Ultimo aggiornamento:
29 settembre 2024
Jungle Leopard
Jungle Leopard ARGB PWM Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub,Magnetic Suction, SATA Power Cord
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Jungle Leopard is a Chinese Guangdong brand with over 20 years of development, with a certain level of popularity in both domestic and international markets, and a significant influence in the player market. The R&D product line covers products such as CPU air-cooled heat sinks, chassis cooling fans, etc.
The Jungle Leopard JL8 fan hub can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans or ARGB devices.
Jungle Leopard JL8ARGB&PWM 2-in-1 fan hub supports motherboard signal synchronization: fan speed and lighting effects can be synchronized in real-time to the motherboard for free control
Magnetic suction quick fixing design: The hidden built-in magnet can be attached to the iron metal inside the chassis, and the surface can freely change position. Bringing more freedom to the internal wiring of the chassis, making it easier and neater to manage the wiring inside the chassis
SATA power interface design: Stable power interface, capable of continuous and reliable output during full load operation
Product parameters: Product name: Jungle Leopard JL8ARGB&PWM 2-in-1 Hub; Size: 133 * 48 * 14.3mm; Fan PWM ports: 8 (4Pin); PWM rated voltage: 12V; Light interface: 8 (3-pin ARGB); Rated voltage of lighting: 5V; Power interface: SATA; Power supply safety current: 4.5A; Fixed mode: magnetic suction
Note:+12V 4Pin RGB interface devices do not support it! Do not insert! Please pay attention to the arrow marked on the ARGB device plug and insert it in the 5V direction. Incorrect insertion direction poses a risk of damaging the device
9,99 € SU AMAZON
Thermalright
Thermalright Supporto controller per fan ARGB e HUB a 8 porte, 3 pin, 5 V, forte pasta + aspirazione magnetica, cavo di alimentazione SATA ingresso diretto (12 V 4 pin RGB non supportato)
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Thermalright è un marchio taiwanese con oltre 20 anni di sviluppo. Ha una certa popolarità nei mercati nazionali ed esteri e ha un impatto decisivo sul mercato dei giocatori. Le linee di prodotti R-D includono: raffreddamento CPU raffreddato ad aria, ventola del telaio, cuscinetto in silicone termoconduttivo, grasso siliconico conduttivo, controllo della ventola CPU, supporto anti-goccia, staffa di montaggio e altri prodotti.
Questo hub della ventola supporta l'installazione di 8 gruppi di ventole ARGB, rendendo il cablaggio facile da gestire. Forte modalità di installazione della pasta, comoda linea di alimentazione SATA, trasmissione diretta e sicurezza e.
Costruito con forti adesivi biadesivi che si attaccano al telaio con nastro biadesivo. Trasmissione diretta della linea di alimentazione SATA, più concisa ed efficiente. Mantenere la prestazione stabile sotto carichi elevati.
Supporta la visualizzazione della velocità della ventola e il controllo della ventola PWM. (A causa della limitazione del principio di lettura PWM IC, viene rilevata solo la velocità di una singola ventola che viene inserita nell'interfaccia rossa.)
Corpo piccolo, grande capacità. Gestione e controllo multilinea, mantenere i cavi puliti, supportare ventole ARGB, barra luminosa ARGB, ecc. e sincronizzare l'efficienza luminosa dell'apparecchiatura di interfaccia a 3 pin a 5 V. (Nota: il dispositivo di interfaccia RGB a 4 pin non è supportato! Non utilizzare! Si prega di notare la freccia sul connettore ARGB e inserirla nella direzione di 5 V.
12,90 € SU AMAZON
TZMRIT
TZMRIT 2 in 1 ARGB PWM Fan Hub con controller, 9 connettori per fan PWM a 4 pin, 9 porte ARGB da 5 V, base magnetica e alimentazione SATA 18, hub RGB con velocità regolabile
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Aspetto personale, design multi-interfaccia, 9 interfacce di controllo della temperatura 4IPN e 9 x 5 V 3 pin ARGB espansione, che migliorano notevolmente la capacità.
Ci sono molte modalità che corrispondono al tuo stile e la modalità di controllo remoto ha più di 360 tipi di effetti luminosi. Anche se la scheda madre non supporta la sincronizzazione 5V, ci sono molti modi per giocare con la modalità remota.
Design con sfondo magnetico. La parte inferiore del controller adotta un design ad assorbimento magnetico di grandi dimensioni, che rende l'installazione molto semplice.
Supporta 5V AURA ARGB Sync per schede madri come ASUS, MSI, Gigabyte, ASRock, ecc.
Il controller è dotato di un telecomando wireless e puoi passare liberamente dalla modalità scheda madre alla modalità di controllo remoto
15,99 € SU AMAZON
TZMRIT
TZMRIT ARGB PWM Fan Hub, Addressable 5V 3Pin ARGB & 12V 4Pin PWM 2-in-1 RGB Case Fan Hub with Hidden Magnetic Base and SATA Power 18 Port, Support 9 Computer Fan CPU Splitter
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
L'hub della ventola può supportare fino a nove ventole, tra cui un totale di nove porte PWM a 4 pin e 9 porte ARGB per ventole ARGB o dispositivi ARGB.
La velocità della ventola può essere regolata tramite il segnale PWM della scheda madre e il sistema può leggere solo la velocità di "Fan 1". La funzione di controllo della velocità non è applicabile alla ventola a 3 pin e la ventola a 3 pin collegata funziona alla massima velocità.
Supporta la sincronizzazione della scheda madre 12 V RGB/5 V ARGB commutando un piccolo interruttore per sincronizzare due sistemi di illuminazione, compatibile con AURA, RGB Fusion, Mystic Light e Polychrome. Non esiste una modalità colore integrata e il cavo di sincronizzazione deve essere collegato alla testa della scheda madre.
Connettori ARGB (3 pin) fino a 9 pin per collegare altri dispositivi per creare il proprio sistema di illuminazione e supportare fino a 200 LED.
PCB di alta qualità, molto resistente, con velcro, facile da collegare hub al telaio, alimentatore SATA può mantenere prestazioni stabili anche a pieno carico.
13,99 € SU AMAZON
EZDIY-FAB
EZDIY-FAB ARGB PWM Fan Hub per Ventola Case PC,8 Porte PWM+8 Porte ARGB,12V RGB/5V ARGB Sincronizzazione Scheda Madre,Adattatore per Ventola Funzionale,Due Sistemi di Illuminazione
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
L'hub per ventole può supportare fino a 8 ventole, tra cui un totale di 8 porte PWM a 4 pin e 8 porte ARGB per ventole ARGB o dispositivi ARGB.
La velocità della ventola può essere regolata dal segnale PWM della scheda madre; solo la velocità della "ventola 1" può essere letta dal sistema. La funzione di controllo della velocità non è disponibile per le ventole a 3 pin; le ventole a 3 pin collegate funzioneranno al massimo numero di giri.
Supporta la sincronizzazione della scheda madre a 12 V RGB/ 5 V ARGB, attivando il piccolo interruttore per ottenere la sincronizzazione di due sistemi di illuminazione, compatibile con AURA, RGB Fusion, Mystic Light, Polychrome. Nessuna modalità di colore integrata, il cavo di sincronizzazione deve essere collegato all'intestazione della scheda madre.
Fino a 8 set di connettori ARGB (a 3 pin) per soddisfare le esigenze di collegamento di più dispositivi, per creare il proprio sistema di illuminazione, per supportare fino a 200 LED.
PCB di alta qualità, molto resistente, velcro adesivo incluso per fissare facilmente l'hub nel telaio, l'alimentazione SATA mantiene un'uscita stabile anche a pieno carico.
23,99 € SU AMAZON
ARCTIC
ARCTIC Case Fan Hub - Hub per Ventole PC, Distributore di Ventilatori, Funzione PWM, fino a 10 Ventole (4 pin), Connettore con Potenza SATA - Nero
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
NUOVO CASE FAN HUB: Utilizza il nuovo Case Fan Hub per alimentare in modo stabile fino a 10 ventole a 3 poli o PWM; per opzioni di raffreddamento eccezionali con un'eccellente gestione dei cavi!
GESTIONE CENTRALIZZATA DEI CAVI: L'Hub per ventole può essere messo liberamente nell'alloggiamento. È collegato alla scheda madre con un solo cavo, pertanto non avrete cavi aggiuntivi
CONTROLLO SINCRONIZZATO: Il segnale PWM impostato viene trasmesso in modo sincrono a tutte le ventole collegate. I giri al minuto del primo slot vengono rilevati e inviati al sistema
ALIMENTAZIONE ESTERNA: Le ventole sono alimentate direttamente tramite Potenza SATA. In questo modo non si ha perdita di tensione della velocitò e si ha un funzionamento regolare senza intoppi
DATI TECNICI: Output 10 x 4-pin PWM Socket, fino a 1 A per porta; Input: Connettore SATA + 4-pin, fino a 4.5 A
9,99 € SU AMAZON
QIMEI-SHOP
Hub Argb 5V 3Pin RGB LED Splitter Fan Hub da 1 a 11 Porte con Porta SATA per Computer PWM Fan
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Hub ARGB a 11 porte: L'interfaccia RGB è estesa fino a 11 porte, consentendo di controllare in modo sincrono più canali di fan RGB.
Facile da installare: C'è nastro autoadesivo sul retro e un foro per vite di montaggio nel mezzo della scheda, rendendo l'installazione più flessibile.
Risparmio di spazio: portatile e compatto, il mozzo può efficacemente risparmiare spazio, facilitare la gestione del cavo e mantenere pulito l'interno del telaio.
Nota: Questo hub è compatibile solo con testine o controller RGB a 3 pin 5V indirizzabili. Non collegare un componente RGB 12V a 4 pin.
Confezione: 1 hub ARGB, dotato di un normale cavo di collegamento a 3 pin. Nota: il cavo di alimentazione SATA non è incluso.
9,99 € SU AMAZON
TZMRIT
TZMRIT Hub ARGB, connettore PWM 2 in 1 ARGB Hub ventola integrato, otto porte PWM a 4 poli, otto porte ARGB a 3 poli, controlla otto ventole di alloggiamento PWM ARGB contemporaneamente
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Funzione: PWN, l'hub della ventola ARGB 2 in 1 può regolare la velocità della ventola e sincronizzare gli effetti di luce ARGB, gli utenti possono ottimizzare meglio le prestazioni di raffreddamento del case del computer. (Nota: i dispositivi di interfaccia ARGB 12V4Pin non sono supportati! Si prega di non collegare)
Supporta fino a 8 ventole: l'hub della ventola IHTP supporta fino a 8 ventole, tra cui un totale di 8 porte PWM a 4 pin e 8 porte ARGB a 3 pin per ventole ARGB e strisce LED ARGB.
Ingresso di alimentazione SATA stabile: l'alimentazione SATA direttamente dall'alimentatore supporta fino a 8 ventole per evitare correnti dispersive quando si utilizza l'hub della ventola. Nessuna perdita di tensione durante la rotazione delle ventole, per un funzionamento più fluido ed efficiente.
Delicato e compatto: l'aspetto compatto è molto salvaspazio e rende il cablaggio del case più ordinato e bello
Miglior servizio: per qualsiasi domanda siamo a vostra disposizione 24 ore su 24.
13,99 € SU AMAZON
Corsair
Corsair iCUE COMMANDER CORE XT Controller digitale per la velocità delle ventole e l'illuminazione RGB, Fino a sei PWM ventole e 264 LED RGB, modalità Zero RPM, monitoraggio temperatura, Nero
10% Sconto
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Connetti. Monitora. Controlla: trasforma il tuo case in uno smart case, grazie al software iCUE che ti permette di controllare in modo efficiente ventole e l'illuminazione.
Velocità delle ventole PWM meticolosa: alimenta e gestisce fino a sei ventole PWM, inclusa la modalità Zero RPM per un funzionamento inudibile a basso carico.
Personalizzazione dell'illuminazione RGB di tutto il sistema: gestisci 264 LED RGB, connetti direttamente sei ventole CORSAIR RGB, nonché un canale di illuminazione per controllare dispositivi RGB.
Rilevamento intelligente delle ventole: COMMANDER CORE XT rileva automaticamente qualsiasi combinazione fino a sei ventole RGB CORSAIR regolabili singolarmente.
Monitoraggio preciso della temperatura: due sensori di temperatura riposizionabili consentono di monitorare con precisione le temperature all’interno del sistema grazie al software CORSAIR iCUE.
Compatibile con QL RGB, LL RGB, ML PRO RGB, SP RGB ELITE, SP RGB PRO, ventole HD RGB, PSU CX-F RGB, Hydro X Series, RGB LED HUB, RGB LED Lighting Pro Expansion Kit, LS100 Lighting Strips.
68,90 € SU AMAZON
NZXT
NZXT RGB & Fan Controller - AC-CRFR0-B1-6 canali di Illuminazione RGB - 3 canali della Ventola - Personalizzazione dell'illuminazione RGB - Nero
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Puoi comandare fino a nove ventole PWM e gestire il profilo di velocità ventola via software NZXT CAM.
Puoi ampliare la configurazione degli RGB con sei canali di illuminazione e personalizzare tutti i tuoi accessori compatibili con gli RGB via software NZXT CAM, per creare eetti e combinazioni di colori a piacere.
Puoi installare il controller in tutta facilità utilizzando i magneti integrati o le fasce adesive in dotazione. Il controller presenta inoltre fori per viti di montaggio del vano drive 2.5, per il fissaggio alla staa di montaggio SSD.
Puoi comandare fino a nove ventole PWM e gestire il profilo di velocità ventola via software NZXT CAM
Puoi ampliare la configurazione degli RGB con sei canali di illuminazione e personalizzare tutti I tuoi accessori compatibili con gli RGB via software NZXT CAM, per creare eetti e combinazioni di colori a piacere
Puoi installare il controller in tutta facilità utilizzando I magneti integrati o le fasce adesive in dotazione; il controller presenta inoltre fori per viti di montaggio del vano drive 2.5, per il fissaggio alla staa di montaggio SSD
Il nostro obiettivo principale è la soddisfazione del cliente
39,68 € SU AMAZON
argb fan hub
fan argb hub
hub fan argb
argb pwm fan hub
fan hub pwm argb
argb fan hub controller
fan hub
hub fan
argb fan
fan argb