Ezdy Hub Ventole
I 10 migliori prodotti di ottobre 2024
Ultimo aggiornamento:
10 ottobre 2024
ARCTIC
ARCTIC Case Fan Hub - Hub per Ventole PC, Distributore di Ventilatori, Funzione PWM, fino a 10 Ventole (4 pin), Connettore con Potenza SATA - Nero
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
NUOVO CASE FAN HUB: Utilizza il nuovo Case Fan Hub per alimentare in modo stabile fino a 10 ventole a 3 poli o PWM; per opzioni di raffreddamento eccezionali con un'eccellente gestione dei cavi!
GESTIONE CENTRALIZZATA DEI CAVI: L'Hub per ventole può essere messo liberamente nell'alloggiamento. È collegato alla scheda madre con un solo cavo, pertanto non avrete cavi aggiuntivi
CONTROLLO SINCRONIZZATO: Il segnale PWM impostato viene trasmesso in modo sincrono a tutte le ventole collegate. I giri al minuto del primo slot vengono rilevati e inviati al sistema
ALIMENTAZIONE ESTERNA: Le ventole sono alimentate direttamente tramite Potenza SATA. In questo modo non si ha perdita di tensione della velocitò e si ha un funzionamento regolare senza intoppi
DATI TECNICI: Output 10 x 4-pin PWM Socket, fino a 1 A per porta; Input: Connettore SATA + 4-pin, fino a 4.5 A
9,99 € SU AMAZON
GeekerChip
GeekerChip PWM Fan Hub,Hub per 4-pin PWM Fans,6 vie Nero intrecciato cavo di alimentazione della ventola, adattatore CPU/Housing per i fan di connettore multipli
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Funzione: Splitter PWM nero a 6 vie per ventilatori per computer
Design: Progettato per la necessità di controllare molti ventilatori di sistema
Convenienza: 1 connettore femmina a 4 pin + 6 connettori maschio a 4 pin (1 uno per il processore 12V e 5 per le ventole della custodia).
Compatibilità: Fan Hub a 4 pin compatibile con tutte le ventole CPU e alloggiamento da 12 V con connettore a 4 pin o 3 pin.
Supporto: funzione di supporto PWM, controllo della velocità, soddisfa le tue esigenze di controllo
5,99 € SU AMAZON
Thermalright
Thermalright FAN HUB Controller REV,controller di ventole per PC a 10 porte e 4 pin, Fan Hub a 12 V, pasta forte + aspirazione magnetica, ingresso diretto del cavo di alimentazione SATA
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Thermalright è un marchio taiwanese con oltre 20 anni di sviluppo. Ha una certa popolarità nei mercati nazionali ed esteri e ha un'influenza decisiva nel mercato dei lettori. Le linee di prodotti R & S comprendono: Radiatore raffreddato ad aria della CPU, ventola di raffreddamento del telaio, pad in silicone a conduzione termica, grasso in silicone a conduzione termica, controller della ventola della CPU, staffa di montaggio anti-caduta, staffa di montaggio di supporto e altri prodotti.
Questo hub per ventole supporta l'installazione di 10 gruppi di ventole, facilitando la gestione del cablaggio. Modalità di installazione con pasta forte, comoda trasmissione diretta della linea di alimentazione SATA e sicurezza garantita.
Thermalright è un marchio taiwanese con oltre 20 anni di sviluppo. Ha una certa popolarità nei mercati nazionali ed esteri e ha un'influenza decisiva nel mercato dei lettori. Le linee di prodotti R & S comprendono: Radiatore raffreddato ad aria della CPU, ventola di raffreddamento del telaio, pad in silicone a conduzione termica, grasso in silicone a conduzione termica, controller della ventola della CPU, staffa di montaggio anti-caduta, staffa di montaggio di supporto e altri prodotti.
Corpo piccolo, grande capacità. Controllo multilinea per mantenere i cavi in ordine.
Supporto della lettura della velocità della ventola e della regolazione PWM della ventola. (a causa della limitazione del principio di lettura del circuito integrato della scheda madre PWM, viene riconosciuta solo la velocità di una singola ventola inserita nell'interfaccia rossa).
10,19 € SU AMAZON
GeekerChip
GeekerChip 4 pin PWM Fan Hub,CPU/Case Fan Splitter Cavo-1 Femmina e 5 Porte con 4 Pin,per ventole di Raffreddamento del Computer
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Splitter ventole supporta la funzione PWM, il controllo della velocità, soddisfa le tue esigenze di controllo
In grado di espandere un'intestazione della ventola della scheda madre PWM per supportare fino a cinque ventole
1 Connettori femmina connettore a Pin + 5 maschio a Pin (uno per 12 V CPU e 4 per ventole ).
Espandere 5-bit 4-Pin Fan Fan interfaccia interfaccia per risolvere la mancanza di scheda madre, oltre che concentrarsi sul filo.
Lunghezza cavo: ca. 40 cm
5,59 € SU AMAZON
Jungle Leopard
Jungle Leopard ARGB PWM Fan HUB Controller Support 8 Groups of Fans, 8-Port 4 Pin PC Fan Controller, 5V-3Pin ARGB Fan Hub,Magnetic Suction, SATA Power Cord
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Jungle Leopard is a Chinese Guangdong brand with over 20 years of development, with a certain level of popularity in both domestic and international markets, and a significant influence in the player market. The R&D product line covers products such as CPU air-cooled heat sinks, chassis cooling fans, etc.
The Jungle Leopard JL8 fan hub can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans or ARGB devices.
Jungle Leopard JL8ARGB&PWM 2-in-1 fan hub supports motherboard signal synchronization: fan speed and lighting effects can be synchronized in real-time to the motherboard for free control
Magnetic suction quick fixing design: The hidden built-in magnet can be attached to the iron metal inside the chassis, and the surface can freely change position. Bringing more freedom to the internal wiring of the chassis, making it easier and neater to manage the wiring inside the chassis
SATA power interface design: Stable power interface, capable of continuous and reliable output during full load operation
Product parameters: Product name: Jungle Leopard JL8ARGB&PWM 2-in-1 Hub; Size: 133 * 48 * 14.3mm; Fan PWM ports: 8 (4Pin); PWM rated voltage: 12V; Light interface: 8 (3-pin ARGB); Rated voltage of lighting: 5V; Power interface: SATA; Power supply safety current: 4.5A; Fixed mode: magnetic suction
Note:+12V 4Pin RGB interface devices do not support it! Do not insert! Please pay attention to the arrow marked on the ARGB device plug and insert it in the 5V direction. Incorrect insertion direction poses a risk of damaging the device
9,99 € SU AMAZON
EZDIY-FAB
EZDIY-FAB Moonlight Ventole Case RGB da 120 mm con Fan Hub X e Telecomando,Scheda Madre Aura SYNC,Controllo della velocità,Ventilatore Indirizzabile per PC Case-6 Pack
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Effetti di luce sorprendenti - Tri-apertura all'interno e all'esterno effetto di luce luminosa, dare un effetto di luce visiva di impatto.
Illuminazione Sync RGB tramite scheda madre: Supporto M/B 3 pin RGB Header (5V, Di, -, G), compatibile con Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB
Con EZDIY-FAB Fan Hub X e il telecomando a 21 tasti, è possibile regolare in tempo reale gli effetti della retroilluminazione a LED, i colori, la luminosità e la velocità delle ventole. Nota: la corrente massima è di 5A; l'HUB-X supporta il collegamento di sole 6 ventole, il superamento di questo numero può causare danni all'hub.
Dotato di 8 cuscinetti in gomma antivibrazioni per prevenire efficacemente le vibrazioni durante il funzionamento, riducendo notevolmente il rumore e migliorando l'efficienza.
Il cuscinetto autolubrificato e la sostanza autolubrificante riduce il rumore di funzionamento e migliora l'efficienza termica
56,99 € SU AMAZON
Thermalright
Thermalright FAN HUB X4 Controller CPU Hub supporta 4 gruppi di ventole di raffreddamento, controller ventola PC 4 pin, hub ventola 12 V, SATA Power Cord Direct Input, adattatore funzionale PWM
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Gestione cavi ad alte prestazioni: supporta l'installazione di 4 ventole PC allo stesso tempo, può essere utilizzato un connettore, supporta il connettore della ventola PWM, può mantenere ordinato il cavo della ventola della CPU.
Supporto PWM: supporta la lettura della velocità della ventola in pu e la regolazione PWM, il prodotto ha un'interfaccia rossa, a causa del limite del principio di lettura IC della scheda madre PWM, basta inserire la velocità della ventola singola nell'interfaccia rossa.
Specifiche: modello: FAN HUB X4, dimensioni: 67 x 24 x 12 mm, materiale: plastica, colore: nero, peso: 20 g, soluzione semplice per mancanza di interfaccia della scheda madre.
Uscita stabile: il sincronizzatore dell'hub della ventola è uscita diretta SATA, in condizioni di carico elevato, può mantenere un'uscita stabile, dimensioni compatte, superficie superiore con logo inciso Thermalrigh, funzione stabile
Lunghezza sufficiente: il cavo nero lungo 500 mm è abbastanza lungo per installare la corsa della ventola ovunque nell'alloggiamento, più durevole e rende l'interno del case del PC più pulito e ordinato.
5,79 € SU AMAZON
RUNCCI-YUN
RUNCCI-YUN Hub ventola PC, cavo intrecciato adattatore mozzo splitter ventola CPU PWM a 4 porte PC a 4 pin, 1 hub ventola femmina a 5 maschio progettato, per ventole di Raffreddamento del Computer
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
★ 3 pezzi splitter PWM nero a 5 vie per gli appassionati di computer
★ Progettato per la necessità di controllare molte ventole di sistema
★ Fan Hub a 4 pin compatibile con tutte le CPU da 12V e la ventola del case con connettore a 4 pin o 3 pin
★ Supporta la funzione PWM, il controllo della velocità, soddisfa le tue esigenze di controllo
★ 1 connettore femmina a 4 pin e 4 connettori maschio a 4 pin (1 per ventola di raffreddamento della CPU da 12 V e 3 per ventola del case), migliore alimentazione per le ventole interne della scheda madre nel case del PC.
9,88 € SU AMAZON
Greluma
Greluma 2 Pezzi PWM Fan Hub PC 5 Way Splitter Sleeved PWM Fan Splitter Hub Adattatore Cavo per 12V Desktop Computer Cooler Case Ventilatori 4 Pin e 3 Pin
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Alimenta fino a 5 ventole per PC da una singola intestazione ventola PWM a 4 pin
Connettore: 1 connettore femmina a 4 pin e 4 connettori maschio a 4 pin (1 per CPU da 12 V e 4 per ventole del case)
Compatibile con tutte le ventole della CPU e del case da 12 V con connettore a 4 o 3 pin
NOTA: non superare l'uscita totale di 12V 2A. Si prega di controllare le specifiche del dispositivo quando si utilizza l'hub della ventola PWM
Pacakge include: 2 mozzi ventola PWM a 5 vie
8,99 € SU AMAZON
IZyufan
IZyufan Hub Ventola PC,CPU/Case Fan Splitter Cavo,6 Porte PWM Fan Hub con 4 Pin,Adattatore per 12V Desktop Computer Cooler Case Ventole 4-Pin e 3-Pin
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
| Target | - È progettato per gli appassionati che hanno bisogno di controllare molti fan del sistema.
| 6 interfacce della ventola | - Può espandere un'intestazione della ventola PWM della scheda madre per supportare fino a 6 ventole, risolvere la mancanza di interfacce della scheda madre e centralizzare l'elaborazione dei fili della ventola.
| Caratteristiche | - Supporta la funzione PWM, il controllo della velocità, soddisfa le tue esigenze di controllo.
| Compatibilità | - Compatibile con ventola CPU o case con connettore a 3 o 4 pin. (L'interfaccia pwm è collegata all'interfaccia della ventola della cpu della scheda madre, la prima interfaccia dedicata alla ventola della cpu. Le interfacce FAN1 / FAN2 / FAN3 / FAN4/ FAN5 sono interfacce convenzionali della ventola pwm).
| La Confezione Include | - 1 ventole PWM a 6 pin.
5,89 € SU AMAZON
hub ventole
ezdy fab ventole