main logo

Esp32 S3 Antenna

I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento: 1 febbraio 2025
iHaospace
iHaospace
ESP32-DevKitC Core Board ESP32-WROOM-32U Development Board ESP32 WiFi Bluetooth Development Board (WROOM-32U)
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • ESP32-DevKitC V4 is a small-sized ESP32-based development board
  • Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-DevKitC V4 on a breadboard.
  • 11,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive Touch Display Development Board, 240x320, IPS, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, Onboard Antenna
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
  • Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • 37,99 € SU AMAZON
Binghe
Binghe
2.13" E-Ink LoRa Display Binghe 2.13" E-Ink LoRa Display con ESP32-S3 LoRa Scheda di sviluppo con Scheda acrilica/Cavo della batteria/Antenna Supporto WIFILORA Bluetooth Compatibile con Arduino
Spedizione gratuita
star

95

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • 【Tecnologia di base e versatilità】: Modulo ESP32-S3 LoRa integrato con chip ESP32-S3FN8 e 1262, supporta WiFi, LoRa e Bluetooth per opzioni di sviluppo flessibili.Compatibile con meshtastick.
  • 【Display di alta qualità】: ESP32-S3 LoRa con display da 250x122 pixel in bianco e nero ad alto contrasto, alta riflettività e angolo di visione ultra ampio per una chiara visibilità in varie condizioni di illuminazione.
  • 【Design a basso consumo energetico】: La scheda ESP32-S3 LoRa con display E-Ink da 2,13” supporta l'alimentazione tramite USB e batteria al litio, con una visualizzazione dei contenuti che dura oltre 180 giorni dopo lo spegnimento.
  • 【Compatibile con più alimentatori】: 2,13 E-ink ESP32-S3 LoRa supporta le interfacce Type-C e batteria al litio con un intervallo di tensione di 3-5V, garantendo un'alimentazione stabile in vari ambienti.
  • 【Funzione di aggiornamento incorporata】: 2.13 elik bianco e nero è dotato di una funzione di aggiornamento parziale dello schermo incorporata, che consente aggiornamenti rapidi con tempi ed energie ridotti per un aggiornamento completo.
  • 28,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4inch Capacitive Touch Display Development Board, 480×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi, With Onboard Antenna
Spedizione gratuita
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4inch capacitive touch display, 480×480 resolution, 65K color
  • Onboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port
  • Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
  • 46,99 € SU AMAZON
QIQIAZI
QIQIAZI
2,13 pollici LoRa Display, E-Ink Display Modulo, ESP32-S3 USB C Display Modulo con SX-1262 LoRa Support WiFi BLE Meshtastick per Arduino (con Guscio in Acrilico + Antenna)
Spedizione gratuita
star

87

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • 【Facilità di Aggiornamento】: E-Ink LoRa ESP32-S3 dotata di una funzione di aggiornamento dello schermo integrata, permette agli utenti di trascinare e rilasciare immagini BMP per aggiornamenti rapidi e semplici. Il bridge UART USB integrato facilita inoltre lo sviluppo secondario, rendendola ideale per sviluppatori e appassionati.
  • 【Controllo Versatile】: La scheda LoRa 2.13 E-Ink ESP32-S3, dotata del chipset ESP32-S3FN8 + SX1262, offre controllo tramite Wi-Fi, BLE e LoRa, permettendo una connessione versatile e flessibile per vari progetti.
  • 【Display E-Ink ad Alta Qualità】: Equipaggiata con un display E-Ink da 2,13 pollici in bianco e nero con risoluzione 212 x 104 pixel, ideale per una visualizzazione chiara e leggibile, perfetta per tag elettronici e di identità.
  • 【Basso Consumo Energetico】: Progettata per un'operatività a basso consumo energetico, la scheda consuma solo 20 uA in modalità deep sleep e può mantenere la visualizzazione per 180 giorni dopo un'interruzione di corrente, prolungando la durata della batteria.
  • 【Display ad Alto Contrasto】: Il E-Ink display da 2,13 pollici offre un alto contrasto, alta riflessione e un angolo di visione ultra ampio, assicurando una visualizzazione chiara e nitida da qualsiasi angolazione.
  • 28,59 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Mini Development Board, Based On ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & BT 5, Castellated Module, Suitable for SMD Applications
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE)
  • Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM. 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, 2 x ADC, etc
  • Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Integrated with USB serial port full-speed controller, 34 x GPIO pins allows flexibly configuring pin functions
  • 11,90 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch LCD Development Board, ESP32 with Display, 800×480, 5-Point Touch, Up to 240MHz Frequency, Supports WiFi & Bluetooth, for Esphome/Home Assistant Projects
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • [Dual-core Processor] Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • [Onboard Antenna] Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
  • [7inch Capacitive Touch Display] Onboard 7inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • [Various Peripheral Interfaces] Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios
  • [Supports Flexible Clock] Module power supply independent setting, and other control to realize low power consumption in different scenarios
  • 53,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch Display Development Board,ESP32 with 800×480 Resolution 65k RGB 7 inch LCD Screen,5-Point Touch,Supports WiFi & Bluetooth
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • ESP32-S3 Development Board onboard 7-inch capacitive touch screen, 800x480 resolution, 65K colors.
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Built-in 512KB SRAM and 384KB ROM, with onboard 8MB Flash and 8MB PSRAM.
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna.Support capacitive touch control via I2C interface, 5-point touch with interrupt support.
  • Onboard CAN, RS485, I2C interface, Micro SD card slot and so on, integrates full-speed USB serial port.
  • Support flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.
  • 52,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 A7670E 4G Development Board, LTE Cat-1 / 2G / WiFi/Bluetooth/Telephone Call/SMS/GNSS Positioning Support, Suitable for 4G Portable WiFi, Onboard Camera/Speaker/Antenna
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB SRAM, 384KB ROM, 2MB of PSRAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, featuring superior RF performance
  • Equipped with the A7670E-FASE cellular module, supports 4G Cat-1/2G networking, GNSS positioning, telephone calls, SMS, and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of A7670E, suitable for connecting with PC for dial-up internet or debugging of A7670E module
  • Onboard lithium battery charging, solar charging, power management, battery capacity measurement, and related protection circuits, supports USB and solar charging with real-time battery capacity measurement. Onboard 18650 battery holder (18650 battery is NOT included), adapting VBAT pin header for connecting to external 3.7V lithium battery, with anti-reverse protection
  • Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption
  • Comes with GNSS high-precision ceramic antenna, OV2640 camera, mini speaker, acrylic case, etc., easy to develop various applications. Comes with online development resources and manual (including tutorials, demos for 4G portable WiFi and other IoT examples). Equipped with A7670E Cat-1 4G communication module to achieve mobile network connection and meet the low-power requirements of IoT, mobile devices, outdoor monitoring, smart home, and other applications.
  • 61,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive 5-Point Touch Display Development Board 240×320 Solution 262K Color IPS Screen,32-Bit LX7 Dual-Core Processor, Supports WiFi & Bluetooth
Spedizione gratuita
star

64

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • ESP32-S3-Touch-LCD-2.8,Integrates SPI Interface Display And 5-Point Capacitive Touch, Multiple Peripheral Interfaces
  • IPS Display Panel,Excellent Display Performance, 262K Color, Wide Viewing Angle
  • Capacitive 5-Point Touch,Supports Touch Function With I2C Interface, 5-Point Touch For Flexible Operation And Smooth Multi-Point UI Interaction
  • Supports Multiple Peripherals,Supports The Expansion Of Multiple Peripherals Via GPIO, UART And I2C Interfaces, Etc.
  • Supports WiFi & Bluetooth, With Onboard Antenna
  • 36,19 € SU AMAZON
esp32 s3 esp32-s3 antenna esp32 esp32 antenna esp32 s3 cam esp32 s3 mini esp32-cam s3 esp32-s3 mini esp32-s3-mini esp32 s3 wroom