main logo

Esp32 Display Lcd

I 10 migliori prodotti di gennaio 2025
Ultimo aggiornamento: 31 gennaio 2025
Freenove
Freenove
Freenove I2C IIC LCD 1602 Module, New Type TWI Serial 16x2 Display, Compatible with Arduino Raspberry Pi Pico ESP32 ESP8266
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • LCD 1602: This module can display 2 lines of characters, with 16 characters per line
  • I2C / IIC Interface: Saves a lot of ports compared to parallel interface (This new model integrates the conversion circuit, making it more stable)
  • Detailed Tutorial: Provides step-by-step guide and detailed explanations (The download link can be found on the product box) (No paper tutorial)
  • Compatible Models: Compatible with mainstream models of Arduino / Raspberry Pi / Raspberry Pi Pico / ESP32 / ESP8266, with example project and code (Other controllers are also compatible but without examples)
  • Get Support: Our technical support team is always ready to answer your questions
  • 8,95 € SU AMAZON
ICQUANZX
ICQUANZX
ICQUANZX T-Display ESP32 WiFi e scheda di sviluppo del modulo Bluetooth per LCD Arduino da 1,14 pollici
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Chipset: ESPRESSIF-ESP32 (Wi-Fi e Bluetooth) 240MHz Xtensa single-/ dual-core 32-bit LX6 microprocessore
  • FLASH: flash QSPI 4 MB / PSRAM 8 MB
  • Display: IPS ST7789V da 1,14 pollici, USB: Tipo-C.Corrente di funzionamento: circa 67MA, corrente di sonno: circa 350uA
  • Interfaccia modulare: UART 、 SPI 、 SDIO 、 I2C 、 LED PWM 、 TV PWM 、 I2S 、 IRGPIO 、 ADC 、 sensore touch condensatore 、 Pre-amplificatore DACLNA
  • Link per scaricare il driver: http://www.wch.cn/downloads/CH341SER_EXE.html
  • 19,59 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.69inch Display Development Board, 32-Bit 240MHz LX7 Dual-Core Processor, 240x280, Support WiFi/BT5, Compact Size, Accelerometer&Gyroscope Sensor, Micro LCD Display With ESP32-S3
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Type-C connector, keeps it up to date, easier to use. Onboard 1.69inch 240×280 pixels 262K display for clear color pictures
  • Built-in ST7789V2 display driver chip, using SPI communication, effectively saving the IO resources. Reserved 12PIN header of 5 × GPIO, I2C, and UART interfaces, for connecting peripherals and debugging
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard 3.7V MX1.25 lithium battery recharge/discharge header. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement. Onboard RST, BOOT and a programmable PWM button for easy custom function development
  • 25,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch LCD Development Board, ESP32 with Display, 800×480, 5-Point Touch, Up to 240MHz Frequency, Supports WiFi & Bluetooth, for Esphome/Home Assistant Projects
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • [Dual-core Processor] Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • [Onboard Antenna] Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
  • [7inch Capacitive Touch Display] Onboard 7inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • [Various Peripheral Interfaces] Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios
  • [Supports Flexible Clock] Module power supply independent setting, and other control to realize low power consumption in different scenarios
  • 53,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.69inch Touch Display Development Board, 240×280 Pixels, 262K Color, Compact Size, Micro LCD Display With ESP32-S3, Accelerometer and Gyroscope Sensor
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
  • Type-C connector, keeps it up to date, easier to use. Onboard 1.69inch 240X280 pixels 262K capacitive touch display for clear color pictures. Built-in ST7789V2 display driver and CST816T capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement
  • Onboard RST, BOOT and a programmable PWM button for easy custom function development. Onboard 3.7V MX1.25 lithium battery recharge/discharge header. High touch screen transmittance, fast response and long lifetime
  • Reserved pads of 4 x GPIO, I2C, and UART interface, for connecting peripherals and debugging. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • 32,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch Display Development Board,ESP32 with 800×480 Resolution 65k RGB 7 inch LCD Screen,5-Point Touch,Supports WiFi & Bluetooth
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • ESP32-S3 Development Board onboard 7-inch capacitive touch screen, 800x480 resolution, 65K colors.
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Built-in 512KB SRAM and 384KB ROM, with onboard 8MB Flash and 8MB PSRAM.
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna.Support capacitive touch control via I2C interface, 5-point touch with interrupt support.
  • Onboard CAN, RS485, I2C interface, Micro SD card slot and so on, integrates full-speed USB serial port.
  • Support flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.
  • 52,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Development Board with 1.69inch Touch LCD Display,240×280 Pixels 262K Color Micro LCD Display with ESP32-S3,Embedded with ST7789V2 Display Driver And CST816T Capacitive Touch Chip
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • ESP32-S3 1.69inch Touch Display Development Board, 240×280 Pixels, Micro LCD Display With ESP32-S3, 262K Color,Embedded with ST7789V2 Display Driver and CST816T Capacitive Touch Chip
  • Equipped with high-performance Xtensa32-bit LX7 dual-core processor, main frequency running up to 240MHz.
  • Support 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), and onboard antenna.
  • Built-in 512KB SRAM and 384KB ROM, 8MB PSRAM, and external 16MB Flash.
  • Onboard 1.69inch capacitive touch LCD screen, 240×280 resolution, 262K colors, can clearly display color pictures.
  • 31,34 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 RGB LCD Driver Board with 480×480 2.8inch TFT RGB Round Display Capacitive 5-Point Touch, with 32-Bit 240MHz LX7 Dual-Core Processor, 8MB PSRAM and Flash, W-Fi & Blue-T Support
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • ✅This comes with a 2.8inch RGB round touch display. For more detailed part list, please refer to the Package Content image.
  • ✅Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory.
  • ✅Integrated 2.4GHz W-Fi and Blue-T LE dual-mode wire-less communication, with superior RF performance. Type-C connector, easier to use.
  • ✅Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability Onboard Lithium battery recharge manager ETA6096 and MX1.25 lithium battery header
  • ✅Castellated module allows soldering direct to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios
  • ❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
  • 53,99 € SU AMAZON
Binghe
Binghe
Wireless Tracker con ESP32 Display LCD Binghe Wireless Tracker Supporta WiFi Bluetooth/LoRa/Gnss/Tracking e localizzazione GPS Type-C con antenna a molla in metallo a 2,4 GHz Compatibile con Arduino
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 【Connettività avanzata】: il tracker wireless integra ESP32-S3FN8, UC6580 e S-X-1262, fornendo una soluzione GNSS veloce per i progetti IoT. Supporta WiFi, Bluetooth e LoRa per il caricamento di dati wireless.
  • 【Compatibilità versatile】: Tracker wireless Perfettamente compatibile con l'ambiente di sviluppo Arduino, ideale per varie applicazioni come il bike-sharing, la localizzazione di animali domestici, la localizzazione di veicoli e la localizzazione di bambini.
  • 【Design efficiente dal punto di vista energetico】: il design multi-sistema a doppia frequenza basato sulla tecnologia a 22 nm garantisce un basso consumo energetico e molteplici metodi di trasmissione dei dati. con antenna a molla in metallo a 2,4 GHz.
  • 【Posizionamento multisistema】: il localizzatore wireless supporta il posizionamento congiunto multisistema L1 + L5/L2 e GPS, GLONASS, BDS, Galileo, NAVIC, QZSS per una localizzazione accurata, in grado di tracciare qualsiasi oggetto.
  • 【Alimentazione comoda】：Dotato di interfaccia USB Type-C e di interfaccia per batteria al litio SH1.25, fornisce una protezione di sicurezza completa e un display LCD da 0,96 pollici a bordo per il debug e il monitoraggio della batteria.
  • 29,99 € SU AMAZON
DIYmalls
DIYmalls
DIYmalls 2.8" ESP32-2432S028R ESP32 Display ILI9341 Resistivo Touchscreen 240x320 TFT LCD Modulo ESP-WROOM-32 Scheda di Sviluppo + Custodia Acrilica per Arduino IDE
Spedizione gratuita
star

68

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • -ESP32-2432S028R display è una speciale combinazione di ESP-WROOM-32 ESP32 scheda di sviluppo + 2.8 "touch screen resistivo modulo ILI9341.
  • -Il modulo ESP32-2432S028R supporta il caricamento del codice sul display giallo da 2,8 pollici esp 32 tramite IDE o strumento flash esp32.
  • -Il display esp32 da 2,8 pollici ha un requisito rigoroso di tensione. Si prega di alimentarlo tramite caricabatterie da 5 V, invece del PC anche se il PC è 5 V.
  • - Viene fornito con 1pcs esp 32 display 2.8 "modulo, 1pcs dupont femmina a 1.25mm filo, 1pcs USB 2.0 a micro USB cavo dati 1 metro, 1pcs acrilico caso.
  • -Manuale utente disponibile se fare come segue: fare clic su "DIYmalls"(puoi trovare "Venduto da DIYmalls" sotto il pulsante Acquista ora), nella nuova pagina, fai clic su "Fai una domanda".
  • 29,98 € SU AMAZON
display lcd lcd display display esp32 esp32 display esp32 lcd lcd esp32 display lcd tv esp32 c3 display transparent lcd display esp32 display lilygo