Epaper Display
I 10 migliori prodotti di novembre 2024
Ultimo aggiornamento:
17 novembre 2024
IBest
IBest 2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down
20,62 € SU AMAZON
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
67,99 € SU AMAZON
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT V4 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller Partial refresh for Raspberry Pi/Jetson Nano/Arduino,Support SPI Interface
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € SU AMAZON
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
24,99 € SU AMAZON
Waveshare
Waveshare 9.7 inch E-Ink Display HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ E-Paper Screen with 1200x825 Resolution IT8951 Controller USB/SPI/I80 Interface
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
No backlight, keeps displaying last content for a long time even when power down
Low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4
USB/SPI/I80 interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)
189,99 € SU AMAZON
Waveshare
Waveshare 7.3inch ACeP 7-Color E-Paper with Solid Wood Photo Frame, Ultra-long Standby, 800x480 Resolution, Suitable for Different Content Displays such as Calendars, Quotes, Paintings, Posters, etc
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Advanced Color ePaper (ACeP) technology, supports 7-Color display
Ultra-low power consumption, basically power is only required for refreshing
Onboard power saving circuit, allows thousand times of refreshing by one charge
Onboard RTC chip for timing refresh. Simple solid wood photo frame, elegant and beautiful
Rotatable stand and hook hanger on the back, not limited to usage scenarios. Open source code, more freedom to customize functions
103,99 € SU AMAZON
LUCKFOX
LUCKFOX 2.13inch E-Paper with PCB(V4), 250x122Pixel Screen, Support Local Refresh, Low Power Consumption, Wide Viewing Angle, for Raspberry Pi/Jetson Nano/STM32, for Electronic Shelf Label
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
No backlight is required, and the display content of the last screen can be kept for a long time after power failure. Very low power consumption, which is only used when refreshing
Based on Pi 40PIN GPIO interface design, compatible with Raspberry Pi series motherboards/Jetson Nano
SPI communication interface is reserved to facilitate access to STM32 and other main control boards. On board level conversion chip, compatible with 3.3V and 5V MCU interfaces
Applicable to price labels, asset equipment labels, electronic shelf labels, conference nameplates, etc
Provide complete supporting information manual (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant examples
18,99 € SU AMAZON
IBest
5.65inch E-paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
The e-paper with advanced Color ePaper (ACeP) technology, supports 7-Color display
Onboard SPI interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.
No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
Onboard voltage translator, compatible with 3.3V / 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Package Content:5.65inch e-Paper Module (F) x1;PH2.0 20cm 8Pin x1
72,99 € SU AMAZON
Binghe
2.13″ e-Paper Display Module Binghe E-Ink Display epaper Screen Hat SPI Display Module con 250x122 Resolution con Embedded Controller Partial Refresh Compatibile con RasPi/Jetson Nano/Arduino
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Basso consumo energetico】: Il modulo del display E-ink da 2,13 pollici di Binghe utilizza la tecnologia e-ink, consumando energia solo durante i cicli di aggiornamento, con un conseguente consumo energetico minimo.
【Alto contrasto】: E-Paper Display con un display in bianco e nero, questo schermo e-ink offre un elevato contrasto, garantendo una chiara visibilità dei contenuti visualizzati.
【Ampio angolo di visione】: E-Paper Display un ampio angolo di visione con una minima distorsione o alterazione del colore, che consente una visione confortevole da diverse angolazioni.
【Elevata leggibilità】: Simile alla carta, il display e-ink offre un'eccellente leggibilità senza bisogno di retroilluminazione, adatta sia agli ambienti interni che esterni.
【Flessibilità】: Il display e-ink può essere facilmente collegato a Ras Pi o ad altre schede di controllo tramite interfaccia SPI, consentendo una comoda trasmissione e controllo dei dati.
11,59 € SU AMAZON
Waveshare
Waveshare 7.5inch E-Paper Display HAT (B) Module 800x480 Resolution 3.3v E-Ink Electronic Screen SPI Interface Red Black White Three-Color for Raspberry Pi Jetson Nano
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
No backlight, keeps displaying last content for a long time even when power down.
Ultra low power consumption, basically power is only required for refreshing. Wide Viewing Angle, Paper-Like Displaying Without Electricity.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.
72,99 € SU AMAZON
epaper display esp32
epaper display arduino
epaper
#1 VINCITORE
