Elrs Rx
I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento:
1 aprile 2025
BETAFPV
BETAFPV SuperD ELRS Diversity Receiver with Dual Receiver Chains 2 Antennas TXCO Tech Support CRSF Protocol for FPV Drone Fixed-Wing Aircraft Long Range Flying Aerial Photography FPV Freestyle Tricks
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【TXCO Tech】SuperD ELRS 2.4G Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long range flight.
【Dual RF Receiver Chains】SuperD ELRS 2.4G Diversity Receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), ensuring longer and more stable flying for FPV drones and RC airplanes. Based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
【Two Dipole T Antennas】SuperD ELRS 2.4G Diversity Receiver comes with Two Dipole T antennas, it will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended.
【Compatible Products】Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying. It greatly fulfills the requirements of reliability for long range flying, aerial photography, or FPV freestyle tricks
【Ultralight Weight】 Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
28,99 € SU AMAZON
BETAFPV
BETAFPV G473 5IN1 Air Brushless Flight Controller 1S AIO Lightweight FC Built-in Serial ELRS RX with 16MB BlackBox BB51 Bluejay 96K ESC OSD Chip External UART Port for 1S FPV Whoop Drone Quadcopter
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Air Brushless Flight Controller, the first 1S FC that utilizes the G473 processor, experienced a remarkable 55% increase in computing speed and lightning-fast response times for precise racing and complex freestyle maneuvers, surpassing the F411
Higher integration yet lightweight design, featuring a custom miniature OSD chip. Weighing only 3.6g (5IN1 Version), it offers extra UART port options for effortless function expansions, adapting flawlessly to any flight scenario
Default integrated onboard 25-400mW VTX. Streamlines installation saves space, reduces weight, and boosts convenience for VTX and FC adjustments. The 5IN1 Version even integrates the Serial ELRS 2.4G RX
Elevate your drone's precision with the industry-leading ICM42688P gyro, integrated accelerometer, cutting-edge sensor calibration, and filtering algorithms, and a sample rate of up to 8K, which takes the drone's posture and movement accurate and precise drone to the next level
Unlock extensive flight data recording and analysis with an impressive up to 16MB capacity black box. Maximize performance and diagnose faults effectively, leveraging the full potential of your drone
64,99 € SU AMAZON
HAPPYMODEL
HAPPYMODEL ELRS RX SX1280 EXPRESSLRS Ricevitore Nano a Lungo Raggio per Drone da Corsa Fai da Te (EP1 RX)
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Il ricevitore Happymodel ELRS Nano Series è un programma open source basato su ExpressLRS, i firmware precaricati sono tutte versioni beta.
Differenza MCU: PP RX con MCU STM32L432KBU6, mentre EP1 / EP2 RX con ESP8285 MCU.
Dettaglio antenna incorporata: PP/EP2 RX con antenna in ceramica SMD, mentre EP1 RX con antenna omnidirezionale. Differenza picco-guadagno: PP / EP2 _RX è 3,7 dB, mentre EP1_RX è 2,23 dB.
Caratteristica comune del ricevitore: aggiornamento tramite Wi-Fi; Tensione di lavoro 5V, modulo RF SX1280IMLTRT, frequenza di aggiornamento di ricezione: 25Hz - 500Hz.
Ricevitore LRS Comodo per Racing, Long Range e Tinywhoop, poiché sono leggeri, di dimensioni Nano e con modulo RF a bassa latenza e alta frequenza di aggiornamento.
24,98 € SU AMAZON
SPEEDY BEE
Ricevitore FPV SpeedyBee ELRS - 2,4 ghz ExpressLRS Nano Receiver Drone RX Module con antenna UFL T da 78mm per drone FPV Tiny Whoop ad ala fissa RC Plane
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Per gare FPV o a lungo raggio. Adatto per Whoops, droni e modelli ad ala fissa.
Design ottimizzato del PCB per una migliore dissipazione del calore.
Diversità dell'antenna per una migliore stabilità e portata del segnale.
31,99 € SU AMAZON
BETAFPV
BETAFPV Matrix 1S G4 3IN1 HD Brushless Flight Controller, Built-in Serial ELRS RX with 5V 3A BEC, 12A ESC, 16MB Blackbox, SH1.0-6Pin Connector for O4 Air Unit for DIY 1S HD Meteor65/75 Pro Whoop
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
New BEC Stable HD Image Transmission: Digital image transmission requires higher current, and 1S whoops often fly at voltages as low as 3.3V, placing significant demands on the BEC. To meet these challenges, an advanced BEC has been developed, capable of delivering over 3A of current at ultra-low voltages down to 2.85V ensuring stable digital image transmission even in critical situations
Enhanced Continuous 12A ESC: HD image transmission adds weight to 1S whoops, demanding stronger power and higher ESC overcurrent capacity. Our engineers exceeded expectations, delivering a robust ESC with 12A continuous output and 18A peak capacity on the iconic "cross" flight controller. This ensures optimal thrust-to-weight ratio, reliable performance, and worry-free high-definition flights
Individual Power Supply for IMU: Unlike traditional shared power supply designs, the Matrix 1S 3IN1 HD FC features an independent 3.3V LDO power supply exclusively for the IMU. This innovation eliminates interference, creating a cleaner and more stable environment that enhances flight precision, improves sensitivity, and reduces the risk of performance issues—ensuring unmatched stability during every flight
Effortless Setup and Maintenance: The Matrix 1S 3IN1 HD FC is designed to maximize your flight time by minimizing setup hassle. Equipped with convenient motor plugs and a SH1.0-6Pin HD digital port, it allows for a completely solder-free installation and maintenance process. Pilots can focus more on enjoying high-definition flight experiences instead of dealing with complex tools
External Device: This Matirx 1S 3IN1 HD Flight Controller not only includes a SH1.0-6Pin connector for DJI O4 Air Unit which is easy to install without soldering, but also reserves 2 complete full-featured serial ports that can be used for external serial receivers, GPS, HD VTX or other serial devices
49,99 € SU AMAZON
Asyduey
Asyduey ELRS 915Mhz RX EXPRESSLRS 915Mhz Ricevitore ELRS 900RX per FPV con Droni RC A Lungo Raggio Quadricottero
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Tipo: ELRS 915Mhz RX EXPRESSLRS 915Mhz Ricevitore ELRS 900RX
A causa dei diversi lotti, potrebbero esserci differenze nell'aspetto del prodotto, nel colore e nel testo stampato, che non influiranno sull'utilizzo.
20,36 € SU AMAZON
Torribala
Torribala Ricevitore RX ExpressLRS ELRS 868/900 Mhz 500 MW con Mini Antenna da 220 mm per Drone da RC FPV
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
È disponibile una versione del ricevitore ELRS. Incorpora un oscillatore a compensato in temperatura per prevenire spostamenti di frequenza causati da variazioni di temperatura, con una potenza di telemetria che arriva fino a 500 mW. Soddisfa in modo significativo i requisiti di affidabilità per voli a lunga distanza, fotografia aerea o manovre FPV freestyle.
Connettore SH1.0 pre-saldato (Plug&Play per una facile installazione con FC)
Componenti elettronici su un lato, risparmio di spazio di assemblaggio, piastra del dissipatore di in alluminio per proteggere i componenti elettronici e migliorare la capacità anti-interferenza
Oscillatore a con compensazione della temperatura recentemente aggiornato, minore perdita di pacchetti, stabilità ad alta frequenza
Potenza di telemetria fino a 500 mW, con conseguente segnale di telemetria più potente e riduzione significativa dei casi di perdita di telemetria.
37,74 € SU AMAZON
HAPPYMODEL
HAPPYMODEL ELRS RX SX1280 EXPRESSLRS Ricevitore Nano a Lungo Raggio per Drone da Corsa Fai da Te (EP2 RX)
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Il ricevitore Happymodel ELRS Nano Series è un programma open source basato su ExpressLRS, i firmware precaricati sono tutte versioni beta.
Differenza MCU: PP RX con MCU STM32L432KBU6, mentre EP1 / EP2 RX con ESP8285 MCU.
Dettaglio antenna incorporata: PP/EP2 RX con antenna in ceramica SMD, mentre EP1 RX con antenna omnidirezionale. Differenza picco-guadagno: PP / EP2 _RX è 3,7 dB, mentre EP1_RX è 2,23 dB.
Caratteristica comune del ricevitore: aggiornamento tramite Wi-Fi; Tensione di lavoro 5V, modulo RF SX1280IMLTRT, frequenza di aggiornamento di ricezione: 25Hz - 500Hz.
Ricevitore LRS Comodo per Racing, Long Range e Tinywhoop, poiché sono leggeri, di dimensioni Nano e con modulo RF a bassa latenza e alta frequenza di aggiornamento.
26,98 € SU AMAZON
BETAFPV
BETAFPV ELRS 2.4GHz Micro Receiver Support 5 CH PWM Outputs Failsafe Function with IPEX MHF T Antenna Compatible for Multirotors Fixed-Wing Helicopters RC Cars Boats Easy to Install Plug and Play
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【PWM Output】BETAFPV ELRS Micro receiver is the first ELRS receiver with PWM output on BETAFPV. Supports 5 channels PWM outputs. It also supports flash CRSF output firmware, in this case CH2 corresponds to TX and CH3 corresponds to RX
【Application】ELRS micro receiver adapts for multiple types of models like fixed-wing, helicopters, RC cars, boats and etc.
【Failsafe Function】When the connection or signal is lost between the radio transmitter and receiver, the failsafe function will adjust all the channels to the failsafe values set by the users, maximum keep safety and prevent from flying away. It's necessary to set up failsafe values properly if you are not using a flight controller, such as RC fixed-wing
【Weight&Size】Weighing about 4.5g with an antenna and with the sizes of 19mm*32mm*9mm (without antenna). It means that an FPV drone can not afford to carry.
【Plug &Play】With the plug-and-play connect ports, micro receiver is very easy to use and does not need to solder
16,99 € SU AMAZON
SUPENG
Compatibile con il modulo Jumper 2.4G ELRS 3.5V-6V TX AION NANO T-PRO/ExpressLRS ELRS AION-RX-MINI Ricevitore compatibile con RC Airplane FPV Drone (Color : ELRS TX)
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Compatibile con il modulo Jumper 2.4G ELRS 3.5V-6V TX AION NANO T-PRO / ExpressLRS ELRS AION-RX-MINI Ricevitore compatibile con RC Airplane FPV Drone
Material: paper
61,91 € SU AMAZON
rx elrs
rx express elrs