Eink Display Raspberry
I 10 migliori prodotti di febbraio 2025
Ultimo aggiornamento:
27 febbraio 2025
IBest
4.2inch E-paper Display Module 400x300 Resolution 3.3V-5V Two-Color E-Ink Display HAT epaper Screen for Raspberry Pi/Arduino/Nucleo Support Full Refresh,SPI Interface
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Onboard voltage translator, compatible with 3.3V/5V MCUs
Ultra low power consumption, basically power is only required for refreshing
No backlight, keeps displaying last content for a long time even when power down
44,15 € SU AMAZON
IBest
5.65inch E-paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
The e-paper with advanced Color ePaper (ACeP) technology, supports 7-Color display
Onboard SPI interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.
No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
Onboard voltage translator, compatible with 3.3V / 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Package Content:5.65inch e-Paper Module (F) x1;PH2.0 20cm 8Pin x1
72,99 € SU AMAZON
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
Comes with development resources and manual (examples for Raspberry Pi)
35,19 € SU AMAZON
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 € SU AMAZON
iiunius
Display E-Ink da 7,5 pollici per Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH e Jetson Nano no/Ard/Nucleo 800 x 480 Pixel Black White Two-Color SPI Interface E-Paper Screen LCD
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Testa GPIO Pi 40 pin: testa di prolunga GPIO standard Pi 40 pin, adatta per schede della serie Raspberry Pi e Jetson Nano
Nessuna retroilluminazione: display e-Paper da 800 x 480 cm per Raspberry Pi senza retroilluminazione, mantiene il contenuto di visualizzazione per un lungo periodo anche quando si è acceso. Consumo energetico ultra basso, la potenza di base è necessaria solo per rinfrescare
Interfaccia SPI da 7,5 pollici, interfaccia SPI, per il collegamento con altre schede di controllo come RPI/Arduino/Nucleo, ecc.
Trasduttore di tensione: schermo touch screen elettronico da 7,5 pollici, trasformatore di tensione onboard, compatibile con MCU da 3,3 V/5 V
Esempi di applicazione: Waveshare 800 x 480, display e-ink da 7,5 pollici, adatto per tag prezzo, etichette asset/attrezzature, etichette per la conferenza, giorno del nome...
Risorse di sviluppo e manuale: Waveshare 800 x 480, display e-ink da 7,5 pollici nero/bianco viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32)
67,19 € SU AMAZON
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
20,99 € SU AMAZON
Waveshare
Waveshare 7.5inch E-Paper Display Hat Module 800×480 E-Ink Electronic Paper Screen for Raspberry Pi/Jetson Nano SPI Interface with ESP32 Driver Board(WiFi/Bluetooth)
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panels
Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc
Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT; www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board
72,50 € SU AMAZON
Waveshare
2.13inch E-Paper HAT+ For Raspberry Pi 5/4B/3B/Zero/Zero W/Jetson Nano,250x122 Pixels e-ink Display HAT V4,Black and White epaper Screen,SPI Interface
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
2.13inch E-Paper HAT+ For Raspberry Pi/ Jetson Nano,Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
Onboard high-precision RTC chip for accurate time control.Optimized PCB layout with additional mounting holes for fixing screws
Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications
No backlight, keeps displaying last content for a long time even when power down
Comes with online development resources and manual,driver board circuit diagram,examples for Raspberry Pi OS / Jetson Nano, etc. and provides pwnagotchi porting tutorial
26,89 € SU AMAZON
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen With Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable For Price Tag, Asset/Equipment Tag, Shelf Label...
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
107,99 € SU AMAZON
Waveshare
Waveshare V4 2.13inch E-Paper HAT+ for Raspberry Pi 5 /for Raspberry Pi Zero 2 W/for Raspberry Pi 3 B/for Raspberry Pi 4B /for Pi Pico W, 250x122, SPI, HAT+ Standard E-ink Display for pwnagotchi kit
Spedizione gratuita
64
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
2.13″ E-Paper HAT+, compared to the previous Waveshare V2, Waveshare V3 and Waveshare V4 basic versions, this latest V4 version with upgraded HAT+ Standard brings improved interoperability. Support Partial Refresh, Low Power, 170° Wide Viewing Angle, Black and White Color, Paper-Like Effect
With standard Pi 40PIN GPIO Header, compatible With Raspberry Pi Series Boards/Jetson Nano. Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws
Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications. Thin and light design, compact in Size, more space-saving
Adopts Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
No backlight required, can maintain the display content of the last screen for a long time when powered off. Can provide with online development resources and manual, such as driver board circuit diagram, examples for Raspberry Pi OS/Jetson Nano and can provide pwnagotchi porting tutorial
27,99 € SU AMAZON
eink display
display raspberry
raspberry display
display touchscreen raspberry
eink display 10
display raspberry 5
eink display arduino
waveshare display raspberry
display for raspberry
raspberry display kit
#1 VINCITORE
